(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

Round Miniature Waterproof Plastic Connectors (Push-Pull Lock Type), HR30 Series【1-100 Pieces Per Package】

Round Miniature Waterproof Plastic Connectors (Push-Pull Lock Type), HR30 Series

Miniature waterproof round connectors. Plastic material is used for reduced weight, and the push-pull lock enables smooth engagement.
In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

PDF

Japanese Only

Features of HR30 Series Round Miniature Waterproof Plastic Connectors (Push-Pull Lock Type)

· Features white index marks which are used to quickly align the two interfaces for proper mating · The secure lock mechanism ensures that locking can be performed while holding it in your hand · The multiple guide keys help prevent erroneous insertion

· Features white index marks which are used to quickly align the two interfaces for proper mating
· The secure lock mechanism ensures that locking can be performed while holding it in your hand
· The multiple guide keys help prevent erroneous insertion

Lock structural diagram - push-pull type (single-action lock)

Lock structural diagram
push-pull type (single-action lock)

Mating state diagram - 3- and 6-pin and 10- and 12-pin

Mating state diagram
3- and 6-pin and 10- and 12-pin

Product Specifications

Product Standards

RatingRated Current5 A (3-pin), 2 A (6-, 10-, 12-pin)Operating Temperature Range-25°C to 85°C
Rated voltage100 V AC, 140 V DC (3-, 6-pin), 30 V AC, 42 V DC (10-, 12-pin)Storage temperature range-10°C to 60°C
ItemStandardConditions
1. Contact resistance5 mΩ or less (3-pin)
15 mΩ or less (6-, 10-, 12-pin: solder type)
30 mΩ or less (6-, 12-pin: DIP type)
Measure at 1 A DC
2. Insulation resistance1,000 MΩ or moreMeasure at 100 V DC.
3. Withstand voltageThere shall be no flashover or dielectric breakdown300 V AC for 1 min.
4. Vibration resistanceThere shall be no electrical discontinuity for 10 μs or greaterTest at 10 to 55 to 10 Hz/cycle, Single amplitude: 0.75 mm, 5 mins./cycle
Three-axial directions: 10 cycles each
5. Mating cycleContact resistance 10 mΩ or less (3-pin)
Contact resistance 30 mΩ or less (6-, 10-, 12-pin: solder type)
Contact resistance: 60 mΩ or less (6-, 12-pin: DIP type)
1,000 times
6. Temperature cycleInsulation resistance: 100 MΩ or more-55°C: 30 mins. > Room temperature: 10 to 15 mins. > +85°C: 30 mins.> Room temperature: 10 to 15 Mins for 5 cycles
7. Humidity ResistanceInsulation resistance10 mΩ or more (at high humidity)
100 MΩ or more (when dry)
Temperature 40°C, Humidity 90 to 95%, 96 hours
8. WaterproofingNo water penetration inside connectorLeave at water depth of 1 m for 30 minutes while mated with the applicable connector

Materials/Processing

ItemMaterialsFinishNote
PlugExterior / InsulatorPPS resin (black)UL94V-0
PBT resin (black)UL94V-0
Polyacetal resin (natural)-
GasketSIR/CR (red/black)-
Male terminal, female terminalBrass, phosphor bronze, copper alloyGold plating-
SpringStainless steel-
ReceptacleExterior / InsulatorPPS resin (black)UL94V-0
GasketCR (black)-
Male terminal, female terminalBrass, phosphor bronze, copper alloyGold plating-
Hex nutBrassNickel plating-
WasherPhosphor bronzeNickel plating-
Crimp contactMale contactPhosphor bronzeSelective gold plating-
Female contactsPhosphor bronzeSelective gold plating-

Product Outline Drawing And Dimensions

Plug

Dimensional drawing of solder type

Dimensional drawing of solder type

Product No.HRS No.ABApplicable cable diameterNoteWeight
HR30-6P-3S(71)130-0004-1 7129.8ø12.6ø4.2 to 5Solder pot inner diameter ø1.14 g
HR30-6P-6S(71)130-0010-4 71Solder pot inner diameter ø0.8
HR30-6P-6P(71)130-0009-5 7130.3
HR30-6PA-3S(71)130-0021-0 7129.8ø3.5 to 4.3Solder pot inner diameter ø1.1
HR30-6PA-6S(71)130-0019-9 71Solder pot inner diameter ø0.8
HR30-6PA-6P(71)130-0020-8 7130.3
HR30-7P-12S(71)130-0027-7 7139.8ø15.5ø6.2 to 7Solder pot inner diameter ø0.66.7 g
HR30-8P-12P(71)130-0026-4 71

Table of dimensions

Dimensional drawing of crimp type

Dimensional drawing of crimp type

Product No.HRS No.AApplicable cable diameterNoteWeight
HR30-7P-10SC(71)130-0013-2 7139.8ø6.2 to 7Compatible crimp terminal HR30-SC-2116 g
HR30-7P-12SC(71)130-0014-5 71
HR30-8P-12PC(71)130-0015-8 71Compatible crimp terminal HR30-PC-211

Table of dimensions

Receptacle

Dimensional drawing of solder type

Dimensional drawing of solder type

Product No.HRS No.ABCDEFNoteWeight
HR30-6R-3P(71)130-1003-4 71168.3ø12ø8.9M8 × 0.7510Solder pot inner diameter ø1.12 g
HR30-6R-6P(71)130-1009-0 71Solder pot inner diameter ø0.8
HR30-6R-6S(71)130-1008-8 7118.4
HR30-7R-12P(71)130-1016-6 7118.69.3ø15ø11.5M11 × 113Solder pot inner diameter ø0.63.4 g
HR30-8R-12S(71)130-1018-1 71

Table of dimensions

Table of dimensions for crimp type

Table of dimensions for crimp type

Product No.HRS No.NoteWeight
HR30-7R-10PC(71)130-1012-5 71Compatible crimp terminal HR30-PC-2113 g
HR30-7R-12PC(71)130-1013-8 71
HR30-8R-12SC(71)130-1014-0 71Compatible crimp terminal HR30-SC-211

Table of dimensions

Dimensional drawing of DIP type

Dimensional drawing of DIP type

Product No.HRS No.ABCDEFWeight
HR30-6R-6PD(71)130-1020-3 7114.98.3ø12ø8.9M8 × 0.75102 g
HR30-6R-6SD(71)130-1021-6 7115.2
HR30-7R-12PD(71)130-1017-9 71169.3ø15ø11.5M11 × 1133.4 g
HR30-8R-12SD(71)130-1019-4 71

Table of dimensions

Jack

Dimensional drawing of solder type

Dimensional drawing of solder type

Product No.HRS No.ABApplicable cable diameterNoteWeight
HR30-6J-6P(71)130-2009-6 71ø1228.8ø4.2 to 5Solder pot inner diameter ø0.83 g
HR30-6JA-6P(71)130-2018-7 71ø3.5 to 4.3
HR30-7J-12P(71)130-2020-9 71ø1537.3ø6.2 to 7Solder pot inner diameter ø0.65.7 g
HR30-8J-12S(71)130-2019-0 715.9 g

Table of dimensions

Dimensional drawing of crimp type

Dimensional drawing of crimp type

Product No.HRS No.Applicable cable diameterNoteWeight
HR30-7J-10PC(71)130-2015-9 71ø6.2 to 7Compatible crimp terminal HR30-PC-2115 g
HR30-7J-12PC(71)130-2017-4 71
HR30-8J-12SC(71)130-2016-1 71Compatible crimp terminal HR30-SC-211

Table of dimensions

Crimp contact

Table of dimensions for male terminals

Table of dimensions for male terminals

TypeProduct No.HRS No.Weight
Loose contactHR30-PC-111130-0022-30.03 g / 1 pin
Reel contactHR30-PC-211130-0016-00.03 g / 1 pin

Table of dimensions

Table of dimensions for female terminals

Table of dimensions for female terminals

TypeProduct No.HRS No.Weight
Loose contactHR30-SC-111130-0023-60.03 g / 1 pin
Reel contactHR30-SC-211130-0017-30.03 g / 1 pin

Table of dimensions

Product Usage

When mounting, smooth mating will be achieved by holding plug "A" and aligning the arrow markings of the plug with those of the receptacle, then pushing the plug straight in.

1. During mating
When mounting, smooth mating will be achieved by holding plug "A" and aligning the arrow markings of the plug with those of the receptacle, then pushing the plug straight in.

When removing the plug from its connected condition, hold the plug by the push/pull locking collar (coupling "B") and pull straight off.

2. During un-mating
When removing the plug from its connected condition, hold the plug by the push/pull locking collar (coupling "B") and pull straight off.

Product Precautions

Precautions

Precautions

  1. 1. Make sure the power is off before mating or un-mating the connector.
  2. 2. When mating the connector, push it on with a force of a least 30 N. After mating, pull lightly on the connector to check for proper mating and to ensure the connector is firmly locked to the receptacle.
  3. 3. After mating the connector, do not apply a force over 30 N to the cable in the directions shown by the arrows. An excessive load can lead to connector damage.
  4. 4. To maintain the waterproof performance, cable clamping force and cable rotational stability, please use a cable within the recommended range for cable diameters. Because the performance will differ depending on the cable structure, make sure to check all specifications of the cable assembly before use or production.
  5. 5. Please assemble and install the connector and components with the specified tightening torque. If the tightening torque is too weak or too strong, loosening or breakage can occur.
Precautions for using heat shrink tubing

Precautions for using heat shrink tubing
The manufacturer recommends that you use shrink tubing over the solder connections in order to protect the soldered wires and to enhance insulation. However, be careful when applying heat in this area when installing the shrink tube so that excess heat does not bleed into or affect the resin parts as shown in the figure below.
If the product does become heated beyond the area shown and into the resin parts, the following could occur.

  1. 1. Deformation of the C ring. This could result in prevention of locking during mating.
  2. 2. Melting of some parts.

To prevent the deformation of the C rings of the receptacles and the jack, the manufacturer recommends heat to be applied after mating with a compatible plug.

Part Number
HR30-6JA-6P(71)
HR30-6PA-3S(71)
HR30-6PA-6P(71)
HR30-6PA-6S(71)
HR30-6R-3P(71)
HR30-6R-6P(71)
HR30-6R-6S(71)
HR30-6R-6SD(71)
HR30-7J-10PC(71)
HR30-7J-12P(71)
HR30-7J-12PC(71)
HR30-7P-10SC(71)
HR30-7P-12S(71)
HR30-7P-12SC(71)
HR30-8J-12S(71)
HR30-8J-12SC(71)
HR30-8P-12P(71)
HR30-8P-12PC(71)
HR30-PC-111
HR30-SC-111
Part NumberStandard Unit PriceNumber of pc(s). included in pkg.Minimum order quantityVolume DiscountDays to ShipApplicable pin/contact Number Of Pins Connector Type Rated Current
(A)
Allowable Voltage
(V)
Wiring Method Connection direction Shell Size Product Category Conforming cable outer diameter
(mm)
Mating partner 1 Mating partner 2 Mating partner 3 Mating partner 4 Mating partner 5 Mating partner 6 Mating partner 7

SGD 6.99

1 Piece(s) 4 Day(s) or more Male6Cable Connection2100SolderStraight6Jackφ 3.5 to 4.3HR30-6P-6S(71)HR30-6PA-6S(71)HR30-6PB-6S----

SGD 11.06

1 Piece(s) 4 Day(s) or more Female3Cable Connection5100SolderStraight6Plugφ 3.5 to 4.3HR30-6R-3P(71)HR30-6J-6P(71)HR30-6JA-6P(71)HR30-6JB-6P---

SGD 8.33

1 Piece(s) 4 Day(s) or more Male6Cable Connection2100SolderStraight6Plugφ 3.5 to 4.3HR30-6R-6S(71)HR30-6R-6SD(71)HR30-6JB-6S----

SGD 6.66

1 Piece(s) 4 Day(s) or more Female6Cable Connection2100SolderStraight6Plugφ 3.5 to 4.3HR30-6R-6P(71)HR30-6R-6PD(71)-----

SGD 7.60

1 Piece(s) 4 Day(s) or more Male3Panel Mount5100SolderStraight6ReceptacleNAHR30-6P-3S(71)HR30-6PA-3S(71)HR30-6PB-3S----

SGD 6.24

1 Piece(s) 3 Day(s) or more Male6Panel Mount2100SolderStraight6ReceptacleNAHR30-6P-6S(71)HR30-6PA-6S(71)HR30-6PB-6S----

SGD 6.99

1 Piece(s) 4 Day(s) or more Female6Panel Mount2100SolderStraight6ReceptacleNAHR30-6P-6P(71)HR30-6PA-6P(71)HR30-6PB-6PHR30-6PD-6P---

SGD 13.27

1 Piece(s) 4 Day(s) or more Female6For PCB2100-Straight6ReceptacleNAHR30-6P-6P(71)HR30-6PA-6P(71)HR30-6PB-6PHR30-6PD-6P---

SGD 7.42

1 Piece(s) 4 Day(s) or more Male10Cable Connection230CrimpStraight7Jackφ 6.2 to 7HR30-7P-10SC(71)HR30-7PB-10SC-----

SGD 9.28

1 Piece(s) 4 Day(s) or more Male12Cable Connection230SolderStraight7Jackφ 6.2 to 7HR30-7P-12S(71)HR30-7P-12SC(71)HR30-7PB-12SHR30-7PB-12SC---

SGD 5.92

1 Piece(s) 4 Day(s) or more Male12Cable Connection230CrimpStraight7Jackφ 6.2 to 7HR30-7P-12S(71)HR30-7P-12SC(71)HR30-7PB-12SHR30-7PB-12SC---

SGD 6.24

1 Piece(s) 4 Day(s) or more Female10Cable Connection230CrimpStraight7Plugφ 6.2 to 7HR30-7R-10PC(71)HR30-7J-10PC(71)HR30-7JB-10PC----

SGD 9.64

1 Piece(s) 4 Day(s) or more Female12Cable Connection230SolderStraight7Plugφ 6.2 to 7HR30-7R-12P(71)HR30-7R-12PC(71)HR30-7R-12PD(71)HR30-7J-12P(71)HR30-7J-12PC(71)HR30-7JB-12PHR30-7JB-12PC

SGD 10.32

1 Piece(s) 4 Day(s) or more Female12Cable Connection230CrimpStraight7Plugφ 6.2 to 7HR30-7R-12P(71)HR30-7R-12PC(71)HR30-7R-12PD(71)HR30-7J-12P(71)HR30-7J-12PC(71)HR30-7JB-12PHR30-7JB-12PC

SGD 16.18

1 Piece(s) 4 Day(s) or more Female12Cable Connection230SolderStraight8Jackφ 6.2 to 7HR30-8P-12P(71)HR30-8P-12PC(71)HR30-8PB-12PHR30-8PB-12PC---

SGD 5.82

1 Piece(s) 4 Day(s) or more Female12Cable Connection230CrimpStraight8Jackφ 6.2 to 7HR30-8P-12P(71)HR30-8P-12PC(71)HR30-8PB-12PHR30-8PB-12PC---

SGD 14.18

1 Piece(s) 4 Day(s) or more Male12Cable Connection230SolderStraight8Plugφ 6.2 to 7HR30-8R-12S(71)HR30-8R-12SC(71)HR30-8R-12SD(71)HR30-8J-12S(71)HR30-8J-12SC(71)HR30-8JB-12SHR30-8JB-12SC

SGD 9.36

1 Piece(s) 4 Day(s) or more Male12Cable Connection230CrimpStraight8Plugφ 6.2 to 7HR30-8R-12S(71)HR30-8R-12SC(71)HR30-8R-12SD(71)HR30-8J-12S(71)HR30-8J-12SC(71)HR30-8JB-12SHR30-8JB-12SC

SGD 13.58

100 Pieces Per Package

1 Pack(s) 4 Day(s) or more Male--2-Crimp--Individual crimp terminalNA-------

SGD 13.58

100 Pieces Per Package

1 Pack(s) 4 Day(s) or more Female--2-Crimp--Individual crimp terminalNA-------

Loading...

  1. 1

Basic Information

Connector Shape Round shape Connector series initials G/H/I G/H/I HR
Protection function (environmentally resistant) IP67 Plating of part touching terminal Gold Operating Temperature Range(°C) -25 to +85

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(65) 6733 7211 / FAX:(65) 6733 0211
9:00am - 6:00pm (Monday - Friday)