(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

1 mm Pitch, Circuit Board-to-Cable / FPC / Micro Coaxial Connector, DF19 Series【1-100 Pieces Per Package】

1 mm Pitch, Circuit Board-to-Cable / FPC / Micro Coaxial Connector, DF19 Series

A thin, 1-mm pitch, board-to-cable/FPC/thin coaxial cable connector. Available in a wide array of variations for circuit boards and cables.
In-stock custom products cannot be returned or canceled. Thank you.

PDF

Japanese Only

1 mm Pitch Thin-Type Connector for Board-to-Cable Connections, Board-to-FPC Connections, Board-to-Micro Coaxial Connections

DF19 Series list

DF19 Series list

Product Specifications

Product Standards

RatingRated CurrentAWG#28: 1 A
AWG#30: 0.9 A
AWG#32: 0.8 A
AWG#36: 0.5 A
FPC: 0.5 A
Micro Coaxial Cable AWG#40: 0.3 A
Operating Temperature Range-35 to 85°C (Note 1)Storage temperature range-10 to 60°C (Note 2)
Rated voltage100 V ACOperating humidity range40 to 80%Storage humidity range40 to 70% (Note 2)
ItemStandardConditions
1. Insulation resistance500 M or moreMeasure at 100 V DC.
2. Withstand voltageThere shall be no flashover or dielectric breakdownEnergize at 300 V AC for 1 min.
3. Contact resistance30 mΩ or less (FPC is 50 mΩ or less)Measure at 100 mA
4. Single unit insertion/extraction forceMin: 0.2 N (20 gf), Max: 3 N (300 gf)Measure using a steel pin with a thickness of 0.2 ±0.005
5. Vibration resistanceThere shall be no discontinuity for 1 μs or greaterFrequency: 10 to 55 Hz, Single amplitude: 0.75 mm, Three directions, 2 hours
6. Humidity resistanceContact resistance: standard value or less, Insulation resistance: 500 MΩ or moreLeave at temperature 40 ±2°C and humidity 90 to 95% for 96 hours
7. Temperature cycleContact resistance: standard value or less, Insulation resistance: 500 MΩ or more(-55°C: 30 mins > 5 to 35°C: 10 mins > 85°C: 30 mins > 5 to 35°C: 10 mins) 5 cycles
8. Durability (Mating / Un-mating)Contact resistance: standard value or less30 mating / un-mating cycles
9. Solder heat resistanceNo melting of resin parts affecting performanceReflow: At the recommended temperature profile, Manual soldering - Soldering iron temperature: 300°C for 3 seconds

(Note 1) This includes temperature increases caused by the flow of current.
(Note 2) The term "storage" refers to products stored for long periods of time prior to mounting and use.
The operating temperature range and humidity range covers non-conducting condition of installed connectors in storage, shipment or during transportation.

Materials/Processing

ProductPart NameMaterialsColor/FinishUL Standard
Pin headerInsulatorPolyamide resinBlack or beigeUL94V-0
ContactsPhosphor bronzeSelective gold plating-
Outer shellPhosphor bronzePartial tin plating or tin-copper plating-
Crimp caseInsulatorPolyamide resinBeigeUL94V-0
Outer shellStainless steelTin-copper plating-
Crimp contacts for socketsContactsPhosphor bronzeGold plating-
FPC socketInsulatorPolyamide resinBeigeUL94V-0
ContactsPhosphor bronzeSelective gold plating-
Grounding board for FPCOuter shellStainless steelTin-copper plating-
Micro coaxial socketInsulatorLCP resinBeigeUL94V-0
ContactsPhosphor bronzeSelective gold plating-
Outer shellPhosphor bronzeTin plating-
Grounding plate for micro coaxial cableOuter shellPhosphor bronzeTin plating-

Features of DF19 Series 1‑mm Pitch Connector for Board to Cable / FPC / Micro Coaxial Cable Connections

Multiple variations

Available with top-board type, offset type, reverse offset type, and vertical mounting type headers, allowing use in a wide variety of setups.

Top-board type

Top-board type

Offset type

Offset type

Reverse offset type

Reverse offset type

Vertical mounting type

Vertical mounting type

Each header includes 3 compatible types of socket (cable type, FPC type, micro coaxial type), providing more options for wire connections.

For FPC connections

For FPC connections

For cable connections

For cable connections

For micro coaxial cable connections

For micro coaxial cable connections

Thin-Type Design

Cable, micro coaxial cable type: 1.5‑mm thickness (max. 1.6 mm) FPC type: Thin type design with a maximum thickness of just 1.7 mm.

Cable connections

Cable connections

FPC connections

FPC connections

Uniform External Dimensions

The outer dimensions of all sockets (cable type, FPC type, micro coaxial cable type) are the same

The outer dimensions of all sockets (cable type, FPC type, micro coaxial cable type) are the same

The outer dimensions of the 3 socket types have been made uniform, allowing use in a wide variety of setups.

Example of Product Usage

Can be used for cell phones, LCD equipment, DVC, DSC, PDA, camera modules and other small devices.

Can be used for cell phones, LCD equipment, DVC, DSC, PDA, camera modules and other small devices.

Product Usage Precautions

1. Recommended temperature profile

  • The same conditions can be applied twice. However, the temperature between the 1st and 2nd cycles should be returned to room temperature
  • The temperature profile indicates the board surface temperature at the point of contact with the connector lead part
  • Although the grounding plate may become discolored, this will have no effect on product performance
Recommended temperature profile

Recommended temperature profile

2. Recommended manual solder conditions
Soldering iron temperature: 290°C ±10°C, Soldering time: within 3 seconds

3. Recommended screen thickness
0.15 mm

4. Board warpage
Max 0.03 mm in the connector center area, based on both connector edges

5. Cleaning conditions
Refer to "Wire-to-Board Connector Use Handbook"

6. Termination conditions
Refer to "Wire-to-Board Connector Use Handbook."

Because the crimped contacts are extremely small, crimping should be performed carefully while referring to the "Crimping Condition Sheet" and "Crimping Quality Standards"

7. Precautions
Be aware that twisting excessively during mating / un-mating may result in breakage

8. Handling
Refer to "Wire-to-Board Connector Use Handbook"

Part Number
DF19-14S-1C
DF19-20S-1C
DF19G-8S-1C(05)
DF19G-14S-1C(05)
DF19G-20S-1C(05)
Part NumberStandard Unit PriceNumber of pc(s). included in pkg.Minimum order quantityVolume DiscountDays to ShipRoHSNumber Of Pins Features

SGD 1.18

1 Piece(s) 3 Day(s) or more -14NA

SGD 25.73

100 Pieces Per Package

1 Pack(s) 4 Day(s) or more -20NA

SGD 0.65

1 Piece(s) 3 Day(s) or more -8With outer shell (EMI compatible)

SGD 0.80

1 Piece(s) 3 Day(s) or more 1014With outer shell (EMI compatible)

SGD 64.14

100 Pieces Per Package

1 Pack(s) 4 Day(s) or more -20With outer shell (EMI compatible)

Loading...

  1. 1

Basic Information

Connector Shape Rectangular Connector series initials D/E/F D/E/F DF
Applicable pin/contact Female Connector Type Cable Connection Rated Current(A) 1
Allowable Voltage(V) AC100 Wiring Method Crimp Connection direction Straight
Plating of part touching terminal No terminal Product Category Socket Specifications For Crimping
Conforming wire size(AWG) NA Contact Pitch(mm) 1 Operating Temperature Range(°C) -35 to +85
Terminal pitch(mm) 1

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(65) 6733 7211 / FAX:(65) 6733 0211
9:00am - 6:00pm (Monday - Friday)