GOT1000 External Input/Output Unit

Brand :

MITSUBISHI

Product Description

Mitsubishi GOT1000 External Input/Output Unit.
[Features]
·For the GOT1000 series.
[Applications]
·Used as an external input/output unit.

Product image of GOT1000 External Input/Output Unit

(Unit: mm)

GT15-DIO dimensional drawing

Category			Optional unit
Series			GOT1000
Unit			External input/output unit
Product Type Name			GT15-DIO
Applicable Standards			UL/cUL, CE(EMC), KC, ABS, BV, DNV GL, LR, NK, RINA
Supported Models			GT27, GT25 (5.7 type, wide model, enhanced environmental resistance model, Handy GOT are excluded), GT16, GT15
Common Specifications	External Connection Method		50-pin connector
	Compatible Wire Size		AWG#28 or less
	Operation Display		N/A
	External Power Supply	Voltage	24 V DC (+20%/-15%, ripple ratio within 5%)
	External Power Supply	Current	1.85 A
	Dielectric Strength		350 V AC for 1 minute
	Internal Current Consumption		0.10 A
	Weight		0.13 kg

Input Specifications (Source Type)	Input Method		Dynamic scan method
	Number of Inputs		16 points / 128 points (16 × 8) (Output 8 points for scan)
	Insulation Method		Opto-isolator insulation
	Rated Input Voltage		24 V DC (+20%/-15%, ripple ratio within 5%)
	Rated Input Current		Approx. 4 mA
	Input Derating		(External input/output unit [Positive common input / Sink type output] [for GOT2000 Series/GOT1000 Series] Refer to Instruction Manual.)
	ON Voltage / ON Current		15 V DC or more / 2 mA or more
	OFF Voltage / OFF Current		4 V DC or less / 1 mA or less
	Input Resistance		Approx. 5.6 KΩ
	Response Time	ON → OFF	0.4 ms or less (24 V DC)
	Response Time	OFF → ON	0.4 ms or less (24 V DC)
	Common Method		16 points 1 common (common terminal: 0 V (Pin number 26 to 29))
	Dynamic Scan Cycle		13.3 ms
Output Specifications (Sink Type)	Output Method		Direct output
	Number of Outputs		16 points + 1 point (RUN output)
	Insulation Method		Opto-isolator insulation
	Rated Load Voltage		24 V DC (+20%/-15%)
	Max Load Current		0.1 A / 1 point
	Maximum Inrush Current		0.7 A 10 ms or less
	Leakage Current When OFF		0.1 mA or less
	Maximum Voltage Drop When ON		0.2 V DC (Max.) 0.1 A
	Protection Function		Available (Overload protection function, overheat protection function)
	Response Time	ON → OFF	1 ms or less (resistant load)
	Response Time	OFF → ON	1 ms or less
	Common Method		16 points 1 common (common terminal: 24 V (Pin number 1 to 4))
	Surge Suppressor		Zener diode

External power supply voltage: When the external power supply is cut off, a system alarm is generated.
ON voltage / ON current, OFF voltage / OFF current: EN61131-2:2003 (digital input type 1) compatible
Response Time: Time consumed in I/O part.
Number of Outputs Points: RUN output ON: During normal operation / OFF: WDT error in GOT main body
Protection function: A function to protect the internal elements of unit. It does not exist in RUN output. This is not a function to protect external devices. Automatically recovers when it is no longer overloaded or overheated. Overload protection function operates independently for each point with 1 to 3 A / 1 point. Overheat Protection Function operates independently for each point.

Category			Optional unit
Series			GOT1000
Unit			External input/output unit
Product Type Name			GT15-DIOR
Applicable Standards			UL/cUL, CE(EMC), KC, ABS, BV, DNV GL, LR, NK, RINA
Supported Models			GT27, GT25 (5.7 type, wide model, enhanced environmental resistance model, Handy GOT are excluded), GT16, GT15
Common Specifications	External Connection Method		50-pin connector
	Compatible Wire Size		AWG#28 or less
	Operation Display		N/A
	External Power Supply	Voltage	24 V DC (+20%/-15%, ripple ratio within 5%)
	External Power Supply	Current	1.85 A
	Dielectric Strength		350 V AC for 1 minute
	Internal Current Consumption		0.10 A
	Weight		0.13 kg

Input Specifications (Sink Type)	Input Method		Dynamic scan method
	Number of Inputs		16 points / 128 points (16 × 8) (Output 8 points for scan)
	Insulation Method		Opto-isolator insulation
	Rated Input Voltage		24 V DC (+20%/-15%, ripple ratio within 5%)
	Rated Input Current		Approx. 4 mA
	Input Derating		(External input/output unit [Negative common input / Source type output] [for GOT2000 Series/GOT1000 Series] refer to instruction manual.)
	ON Voltage / ON Current		15 V DC or more / 2 mA or more
	OFF Voltage / OFF Current		4 V DC or less / 1 mA or less
	Input Resistance		Approx. 5.6 KΩ
	Response Time	ON → OFF	0.4 ms or less (24 V DC)
	Response Time	OFF → ON	0.4 ms or less (24 V DC)
	Common Method		16 points 1 common (common terminal: 0 V (Pin number 26 to 29))
	Dynamic Scan Cycle		13.3 ms
Output Specifications (Source Type)	Output Method		Direct output
	Number of Outputs		16 points + 1 point (RUN output)
	Insulation Method		Opto-isolator insulation
	Rated Load Voltage		24 V DC (+20%/-15%)
	Max Load Current		0.1 A / 1 point
	Maximum Inrush Current		0.7 A 10 ms or less
	Leakage Current When OFF		0.1 mA or less
	Maximum Voltage Drop When ON		0.2 V DC (Max.) 0.1 A
	Protection Function		Available (Overload protection function, overheat protection function)
	Response Time	ON → OFF	1 ms or less (resistant load)
	Response Time	OFF → ON	1 ms or less
	Common Method		16 points 1 common (common terminal: 24 V (Pin number 1 to 4))
	Surge Suppressor		Zener diode

External power supply voltage: When the external power supply is cut off, a system alarm is generated.
ON voltage / ON current, OFF voltage / OFF current: EN61131-2:2003 (digital input type 1) compatible
Response Time: Time consumed in I/O part.
Number of Outputs Points: RUN output ON: During normal operation / OFF: WDT error in GOT main body
Protection function: A function to protect the internal elements of unit. It does not exist in RUN output. This is not a function to protect external devices. Automatically recovers when it is no longer overloaded or overheated. Overload protection function operates independently for each point with 1 to 3 A / 1 point. Overheat Protection Function operates for each 2 points (with a combination of YD00/YD01 to YD0E/YD0F).