BOXTM-6 series

BOXTM-6 series

The 6 series provides a rich variation of high and low toughness, transparency or no transparency, etc. Free combinations are possible.

- PBT with excellent oil resistance and chemical resistance is used for the operating resin (transparent finish).
- Can be mounted to DIN 35 mm (same method as BOXTB).
- (IP65) It can be used in rough cycles since it is waterproof.
- The wide variety of drilling and toughness expands the range of use.
- A rich variation in toughness.
- Uses a high type and low type for height.
- Transparent and non-transparent types used in material.
- A mountable and dismountable block for space-saving.
- Ther terminal block can be mounted and dismounted.
- The terminal block uses one screw for one terminal for an improved configuration of the spring.
- With the terminal block being 1 screw for 1 terminal, 25% more space is saved then with the conventional terminal block.

Part Number

Configured Part Number is shown.

Part Number
Part NumberVolume DiscountDays to ShipRoHSDimension depth D
Hole Processing Number of wire inlets, front
Number of wire inlets, side
Lid, height Lid, Material
7 Day(s) or more Compliant59NA00HighTransparency
7 Day(s) or more Compliant59NA00HighOpaque
7 Day(s) or more Compliant42NA00LowTransparency
7 Day(s) or more Compliant42NA00LowOpaque
7 Day(s) or more Compliant59Available02HighTransparency
7 Day(s) or more Compliant59Available02HighOpaque
7 Day(s) or more Compliant42Available02LowTransparency
7 Day(s) or more Compliant42Available02LowOpaque
7 Day(s) or more Compliant59Available10HighTransparency
7 Day(s) or more Compliant59Available10HighOpaque
7 Day(s) or more Compliant42Available10LowTransparency
7 Day(s) or more Compliant42Available10LowOpaque


  1. 1

Basic Information

Type Other Dimension width W(mm) 88.5 Dimension vertical H(mm) 60
Material Resin Protection function (environmentally resistant) IP65 Intermediate plate Without Circuit Board
Usage location Indoor Terminal block capacity(A) No terminal block Number of terminal block electrodes(P) No terminal block

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(65) 6335 0315 / (65) 6733 7211 / FAX:(65) 6733 0211
9:00am - 6:00pm (Monday - Friday)
9:00am - 3:01pm (Saturday)