Compact 5-Port Solenoid Valve Non-Plug-in JSY1000/3000/5000 Series

Product Specifications

Internal pilot specifications

Valve part number display method (With 2 mounting screws)

Valve replacement parts

Pilot valve part number display method (For JSY1000)

Valve specifications

Valve structure				Rubber seal
Operating fluid				Air
Internal pilot operating pressure range MPa	2-position single			0.15 to 0.7
	2-position double			0.1 to 0.7
	3 positions			0.2 to 0.7
	4-position, dual 3-port valve			0.15 to 0.7
External pilot operating pressure range MPa	Operating pressure range			-100 kPa to 0.7
	Pilot Pressure Range	2-position single		0.25 to 0.7
		2-position double
		3 positions
Ambient and operating fluid temperatures °C				-10 to +50 (no freezing)
Maximum Operating Frequency Hz	JSY1000 JSY3000		2 Position Single, Double	5
			4-position, dual 3-port valve
			3 positions	3
	JSY5000		2 Position Single, Double	5
			4-position, dual 3-port valve	3
			3 positions	3
Manual				Non-locking push type
				Push-turn locking slotted type
				Push-turn locking hand-operated type
Pilot Exhaust Method	Internal pilot			Individual exhaust type
	External pilot
Lubrication				Not required
Mounting orientation^*1)				Free
Impact resistance / vibration resistance^*1) m/s^2				150/30
Protective structure				IP40
Electrical Entry				L plug connector (L), M plug connector (M)
Coil rated voltage (V)				24 V DC
Allowable voltage fluctuation			JSY1000	-7 to +10% of rated voltage (24 V DC)
			JSY3000/5000	±10% of rated voltage
Power consumption: W	DC	Standard	JSY3000/5000	0.4
		With power saving circuit	JSY1000	0.2^*2) [Inrush 0.5, Holding 0.2]
			JSY3000/JSY5000	0.1 [Inrush 0.4, Holding 0.1]
Surge voltage suppressor				Diode
Indicator light				LED

*1)
Impact resistance: No malfunction when tested once for each of the axial and perpendicular directions of the main valve and armature, energized and non-energized conditions. (Initial value)
Vibration resistance: No malfunction when tested under 45 to 2,000 Hz 1 sweep, axial and perpendicular directions of the main valve / armature, energized and non-energized conditions. (Initial value)
*2) The JSY1000 series is set only with a power saving circuit, and the standard (without a power saving circuit) is not supported.

Response time, valve weight

Series	Sealing method	Part number	Switching method	Response time ms (at 0.5 MPa)*)	Mass g
				Standard
				With indicator light, surge voltage suppressor
				Z-Type
JSY1000	Rubber seal	JSY1140T	2-position single	15	17
		JSY1240T	2-position double	5	24
		JSY1 (3/4/5) 40T	3 positions	13	25
		JSY1 (A/B/C) 40T	4-position, dual 3-port valve	14	24
JSY3000		JSY3140	2-position single	27	34
		JSY3240	2-position double	10	49
		JSY3 (3/4/5) 40	3 positions	30	52
		JSY3 (A/B/C) 40	4-position, dual 3-port valve	27	48
JSY5000		JSY5140	2-position single	42	66
		JSY5240	2-position double	13	83
		JSY5 (3/4/5) 40	3 positions	40	93
		JSY5 (A/B/C) 40	4-position, dual 3-port valve	41	80

*) Based on dynamic performance test, JIS B 8419: 2010 (Coil temperature 20°C, rated voltage)

Pilot valve replacement method

Removal procedure

1) Hook the clip from the adapter plate into the concave groove with a flat-blade screwdriver, etc., and remove it.
2) Remove the pilot valve in the direction of the arrow. (Please also remove the gasket.)

Installation procedure

1) Attach the pilot valve to the adapter plate.
2) Insert the clip into the adapter plate. Insert the clip so that it does not come out of the end face of the adapter plate.

*) Make sure that the gasket is attached to the pilot valve.