Thermac Temperature Controller [E5CB]

Brand :

OMRON

Caution

Product Description

Ideal for heater control, best control performance at surprisingly low cost! Easy to read with one of the largest character displays in the world.
[Features]
· Improved visibility with character height of approx. 16 mm.
· Fewer parameters for simple setup.

Dimensional Drawing of OMRON Temperature Controllers

THERMAC Temperature Controller [E5CB] Outline drawing

Crimp Temperature Controllers size: M3.5
Terminal cover (sold separately) (Model E53-COV19)
USB-serial conversion cable (sold separately) (Model: E58-CIFQ2)

Specification Table of OMRON Temperature Controllers

Temperature Controllers Ratings/Performance

Rating

Temperature Controllers Sensor Type
Power supply voltage		AC100~240V 50/60Hz, AC24V 50/60Hz, DC24V
Allowable voltage fluctuation range		85 to 110% of rated voltage
Power Consumption		Approx. 3.5VA (AC100-240V)
		Approx. 3.5VA (AC 24V)
		Approx. 2.5W (DC24V)
Temperature Controllers Sensor Type		Thermocouple: K, J, T, R, S (JIS C 1602-1995, IEC60584-1) Platinum resistance thermometer: Pt100 (JIS C 1604-1997, IEC60751)
Temperature Controllers Output	Relay Output	AC250V 3A (resistive load) Electrical life 100,000 times Minimum applicable load 5V 10mA
Temperature Controllers Output	Voltage output (for driving SSR)	Output voltage DC12V+25%/-15% Maximum load current 21mA
Alarm Output	Relay Output	AC250V 1A (resistive load)
Temperature Controllers Method		2 degrees of freedom PID or ON/OFF
Setting method		Digital setting by front keys
Instruction method		7-segment digital display and single-light-emitting display character height PV: 16.2 mm
Instruction method
Other features		Temperature Controllers input correction, run/stop, protection function, etc.
Ambient temperature		-10 to +55°C (but no condensation or freezing) / 3-year warranty: -10 to +50°C
Ambient humidity		Relative humidity: 25-85%
Storage Temperature Controllers		-25 to +65°C (but no condensation or freezing)

Temperature Controllers Performance

Voltage effect *2
Indication accuracy		Thermocouple: *1 (±0.5% of indicated value or ±1°C, whichever is greater) ±1 digit or less Platinum resistance thermometer: (±0.5% of indicated value or ±1°C, whichever is greater) ±1 digit or less
Temperature effect *2		Thermocouple input (R, S): (±1% PV or ±10°C, whichever is greater) ±1 digit or less Thermocouple input (K, J, T): (±1% PV or ±4°C, whichever is greater) ±1 digit or less Platinum resistance thermometer input: (±1% PV or ±2°C, whichever is greater) ±1 digit or less
Effects of electromagnetic interference (according to EN61326-1)
Adjustment Sensitivity		0.1 to 999.9°C or °F (in 0.1°C or °F increments)
Proportional band (P)		0.1 to 999.9°C or °F (in 0.1°C or °F increments)
Integration time (I)		0 to 3999s (in 1s increments)
Differential time (D)		0 to 3999s (in 1s increments)
Temperature Controllers Period		0.5, 1 to 99 s (in 1 s increments)
Alarm Setting Range		-1999 to 9999 (decimal point position depends on input type)
Input Sampling Period		250ms
Effect of signal source resistance		Thermocouple: 0.1℃/Ω or less (100Ω or less), Platinum resistance thermometer: 0.6℃/Ω or less (10Ω or less) *3
Insulation resistance		20MΩ or more (at DC500V megger)
Withstand voltage		2,300V AC, 50 or 60Hz, 1min (opposite polarity live terminals)
vibration	malfunction	10~55Hz 20m/s² 3 axis direction 10min
vibration	Durability	10~55Hz 20m/s² 3 axial directions 2h
impact	malfunction	200m/s2³ axial directions, 3 times each
impact	Durability	300m/s2³ axial directions, 3 times each
mass		Main unit: Approx. 100g Mounting tool: Approx. 10g
Protective structure		Front: IP66, Rear case: IP20, Terminal: IP00
Memory Protection		Non-volatile memory (number of writes: 100,000)
standard	Certification Standards	UL61010-1, CSA C22.2 No.1010-1
standard	Temperature Controllers Compliance standards	EN61326, EN61010-1, IEC61010-1, VDE0106, Part100 (finger protection) when terminal cover is attached
EMC Directive		EMI EN61326-1 4Radiated interference field strength EN55011 Group1 classANoise terminal voltage EN55011 Group1 classAEMS EN61326-1 4Electrostatic discharge immunity EN61000-4-2Electromagnetic field immunity EN61000-4-3Burst noise immunity EN61000-4-4Conducted interference immunity EN61000-4-6Surge immunity EN61000-4-5Voltage dip/interruption immunity EN61000-4-11

*1. K and T below -100°C are within ±2°C±1 digit. R and S below 200°C are within ±3°C±1 digit.
*2. Conditions: Ambient Temperature Controllers: -10°C to 23°C to 55°C Voltage range: -15% to ±10% of rated voltage
*3. R and S sensors are 0.2°C/Ω or less (100Ω or less).
*4. Industrial electromagnetic environment (EN/IEC61326-1 Table 2)

specification of Temperature Controllers

Temperature Controllers Model number	size	Power supply voltage	Sensor Type	Alarm Output	Temperature Controllers Output
Temperature Controllers Model E5CB-R1TC	Temperature Controllers Model E5CB 48 x 48 mm	AC100-240V	Thermocouples	1	Relay Output
Temperature Controllers Model E5CB-R1P			Platinum resistance thermometer		Relay Output
Temperature Controllers Model E5CB-Q1TC			Thermocouples		Voltage output (for driving SSR)
Temperature Controllers Model E5CB-Q1P			Platinum resistance thermometer		Voltage output (for driving SSR)
Temperature Controllers Model E5CB-R1TCD		AC/DC24V	Thermocouples		Relay Output
Temperature Controllers Model E5CB-R1PD			Platinum resistance thermometer		Relay Output
Temperature Controllers Model E5CB-Q1TCD			Thermocouples		Voltage output (for driving SSR)
Temperature Controllers Model E5CB-Q1PD			Platinum resistance thermometer		Voltage output (for driving SSR)