(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

Clean Gas Filter Cartridge Type Disc, SFA100/200/300 Series

Clean Gas Filter Cartridge Type Disc, SFA100/200/300 Series

Clean gas filter that can be used in a wide range of environments.
[Features]
·Precision filtration of compressed air and nitrogen
·Consistent cleaning, assembly, testing, and antistatic sealed double packaging of all parts in a clean environment
·Cartridge of PTFE membrane element (filtration degree 0.01 µm (filtration efficiency 99.99%))
·Element exchange is possible
·Cartridge type / disc type

(i)Caution

  • ■ SMC Air Cylinder Product Selection and Technical Information
    The featured products page can be found here.

    ■ SMC Product Line
    Webpages for products currently without individual pages on this site will be released on an ad-hoc basis.
    Click here for a quotation or to make an order if you have a model number.

    ■ Products Planned for Online Release
    Air cylinder-related product pages will be released on this site on an ad-hoc basis.
    CQ2, MG types, etc., are already available. Click here to check.
    *Vacuum equipment, FRLs, solenoid valves, etc., will also be released on dedicated pages on this site on an ad-hoc basis.
  • See catalog for specification details.
  • Product images may be representative images. Refer to the catalog for details.

PDF

Clean Gas Filter: Cartridge Type / Disc Type, SFA100/SFA200/SFA300 Series Specifications

SFA103 external appearance

SFA103 external appearance

SFA200 external appearance

SFA200 external appearance

SFA302 external appearance

SFA302 external appearance

Applicable FluidAir, nitrogen
Operating Pressure*1MAX. 0.99 MPa, Vacuum 1.3 × 10-6 kPa
Operating Temperature5 to 80℃
Element Proof Differential PressureMAX. 0.1 MPa
Element Reverse Differential PressureMAX. 0.05 MPa
Filtration*20.01 μm (filtration efficiency 99.99%)
Main MaterialCaseSUS316 (Interior/Exterior: Electrolytic polishing)
Filtration MediumPTFE membrane
SealFluoroelastomer (FKM)
PackagingAntistatic sealed double package

*1: The maximum operating pressure is 0.99 MPa since this product does not conform to the High Pressure Gas Safety Law (Japan). Ensure that, if 0.1 MPa is exceeded, there is no pressure fluctuation during use.
*2: Measured under manufacturer's specified conditions.

Model

ModelRated Flow L/min (ANR)*1ConnectionFiltration Area cm2Element Part No.*2Weight (kg)
SFA100-0226Rc 1/4 (female thread)13.85ED001S-X10V0.34
SFA101-02NPT 1/4 (female thread)
SFA200-0270Rc 1/4 (female thread)33.18ED101S-X10V0.44
SFA201-02NPT 1/4 (female thread)
SFA300-02140Rc 1/4 (female thread)56.75ED201S-X10V0.66
SFA301-02NPT 1/4 (female thread)
SFA102-0226TSJ 1/4
Tube, Swage Joint
13.85ED001S-X10V0.38
SFA202-027033.18ED101S-X10V0.49
SFA302-0214056.75ED201S-X10V0.70
SFA103-0226UOJ1/4
Union O-Ring, Joint
13.85ED001S-X10V0.42
SFA203-027033.18ED101S-X10V0.53
SFA303-0214056.75ED201S-X10V0.75

*1: At inlet pressure of 0.7 MPa and pressure drop of 0.02 MPa.
*2: Contents of diagram numbers (3) to (7) are included in the element part no. (refer to diagrams).

Product Diagram

Cartridge Type / Disc Type, SFA100/SFA200/SFA300 Series diagram

Cartridge Type / Disc Type, SFA100/SFA200/SFA300 Series diagram

NumberPart nameMaterialNote
1CaseSUS 316Electrolytic polishing (interior/exterior)
2V ClampSUS304-
3Holder 1PolyesterElement
4Holder 2
5Filtration MediumPTFE
6PackingFKM
7V packing

Product Outline Dimensional Drawing

SFA100-02/SFA101-02/SFA200-02/SFA201-02/SFA300-02/SFA301-02 dimensional drawings

SFA100-02/SFA101-02/SFA200-02/SFA201-02/SFA300-02/SFA301-02 dimensional drawings

 

(Unit: mm)

 

ModelConnection(A)(øB)
SFA100-02Rc 1/44676
SFA101-02NPT 1/4
SFA200-02Rc 1/45196
SFA201-02NPT 1/4
SFA300-02Rc 1/459120
SFA301-02NPT 1/4

(): Reference dimensions

SFA102-02/SFA202-02/SFA302-02 dimensional drawings

SFA102-02/SFA202-02/SFA302-02 dimensional drawings

 

(Unit: mm)

 

ModelConnection(A)(øB)
SFA102-02TSJ 1/4 (Tube Swage Joint)8976
SFA202-029396
SFA302-02101120

(): Reference dimensions

 

(Unit: mm)

 

SFA103-02/SFA203-02/SFA303-02 dimensional drawing

SFA103-02/SFA203-02/SFA303-02 dimensional drawing

 

(Unit: mm)

 

ModelConnection(A)(øB)
SFA103-02UOJ 1/4 (Union O-Ring Joint)11776
SFA203-0212296
SFA303-02130120

(): Reference dimensions

Product Flow Rate Characteristics (Fluid: Compressed Air / Inlet Temperature: 20°C)

SFA10□ flow rate characteristics

SFA10□ flow rate characteristics

SFA20□ flow rate characteristics

SFA20□ flow rate characteristics

SFA30□ flow rate characteristics

SFA30□ flow rate characteristics

Precautions

  • *Ensure that you read the specific product precautions prior to use.
  • *Confirm the specifications. The Clean Gas Filter is designed for use with compressed air and nitrogen gas only. Do not use with fluids (gases) other than those stated in the specifications, and do not exceed the specified ranges for pressure or temperature, as this will cause damage, etc.
  • *Select a product according to the maximum consumption flow rate. When using compressed air for air blow applications, etc., calculate the maximum volume of air that will be consumed before selecting the SF□ series product size. (Using a product that exceeds the maximum air flow and running excessive compressed air can cause the cleanliness of the compressed air to deteriorate and/or damage the element.)
  • *Set the processing flow rate with an initial pressure drop of 0.02 MPa or less. If the initial pressure drop is set too high, the service life will be shorter due to clogging.
  • *See the manufacturer's catalog for product information other than the above.
  • *Product pictures are example representations for the product series. Please be aware that actual product specifications may be different.
Part Number
SFA100-02
SFA101-02
SFA102-02
SFA103-02
SFA200-02
SFA201-02
SFA202-02
SFA203-02
SFA300-02
SFA301-02
SFA302-02
SFA303-02
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipType Compressed Air Quality Filtration Level Treatment Air Flow Rate
(l/min)
Connection Type Plumbing Thread Nominal Operating Environment Drain Cock Bowl Material Bowl Guard Operating Pressure Range
(MPa)
Compatible Models

SGD 382.20

1 Piece(s) 46 Day(s) StandardGeneral Dry Air0.01μm26[Rc (R)] Rc1/4Clean Room Specifications (Prevent dust)No[Metal] SUS316Nonull~0.99-

SGD 382.20

1 Piece(s) 46 Day(s) StandardGeneral Dry Air0.01μm26[NPT] NPT Female1/4Clean Room Specifications (Prevent dust)No[Metal] SUS316Nonull~0.99-

SGD 509.48

1 Piece(s) 46 Day(s) StandardGeneral Dry Air0.01μm26TSJ1/4Clean Room Specifications (Prevent dust)No[Metal] SUS316Nonull~0.99-

SGD 509.48

1 Piece(s) 46 Day(s) StandardGeneral Dry Air0.01μm26UOJ1/4Clean Room Specifications (Prevent dust)No[Metal] SUS316Nonull~0.99-

SGD 424.67

1 Piece(s) 46 Day(s) StandardGeneral Dry Air0.01μm70[Rc (R)] Rc1/4Clean Room Specifications (Prevent dust)No[Metal] SUS316Nonull~0.99-

SGD 424.67

1 Piece(s) 46 Day(s) StandardGeneral Dry Air0.01μm70[NPT] NPT Female1/4Clean Room Specifications (Prevent dust)No[Metal] SUS316Nonull~0.99-

-

1 Piece(s) Quote StandardGeneral Dry Air0.01μm70TSJ1/4Clean Room Specifications (Prevent dust)No[Metal] SUS316Nonull~0.99-

SGD 551.95

1 Piece(s) 46 Day(s) StandardGeneral Dry Air0.01μm70UOJ1/4Clean Room Specifications (Prevent dust)No[Metal] SUS316Nonull~0.99-

SGD 578.08

1 Piece(s) 46 Day(s) StandardGeneral Dry Air0.01μm140[Rc (R)] Rc1/4Clean Room Specifications (Prevent dust)No[Metal] SUS316Nonull~0.99-

SGD 578.08

1 Piece(s) 46 Day(s) StandardGeneral Dry Air0.01μm140[NPT] NPT Female1/4Clean Room Specifications (Prevent dust)No[Metal] SUS316Nonull~0.99-

SGD 725.67

1 Piece(s) 46 Day(s) StandardGeneral Dry Air0.01μm140TSJ1/4Clean Room Specifications (Prevent dust)No[Metal] SUS316Nonull~0.99-

SGD 725.67

1 Piece(s) 46 Day(s) StandardGeneral Dry Air0.01μm140UOJ1/4Clean Room Specifications (Prevent dust)No[Metal] SUS316Nonull~0.99-

Loading...

  1. 1

Tech Support