5-Port Solenoid Valve, Base Mounted, VZ3000 Series
Caution
- Product images may be representative. Refer to the manufacturer's catalog for details.
Product Description
Solenoid valve suitable for driving cylinders up to ø40 (diameter: 40 mm).
[Features]
· Compact size with a width of just 15 mm
· Low power consumption: 1.8 W DC
・ Base mounted
5-Port Solenoid Valve VZ3000 Series Specifications
VZ3000 Series external appearance
| Usable Fluids | Air | |
|---|---|---|
| Operating Pressure Range MPa | 2-position single | 0.15 to 0.7 |
| 2-position double | 0.1 to 0.7 | |
| 3 Position | 0.15 to 0.7 | |
| Ambient Temperature and Operating Fluid Temperature °C | -10 to +50°C (no See 44 above. freezing) | |
| *1: Response Time ms (at 0.5 MPa) | 2 Position Single, Double | 20 or less |
| 3 Position | 35 or less | |
| Maximum Operating Frequency Hz | 2 Position Single, Double | 10 |
| 3 Position | 3 | |
| *2:Manual operation | Non-locking push type, screwdriver-operated locking type, hand-operated locking type | |
| Pilot Exhaust Method | Pilot valve individual exhaust type, main valve / pilot valve common exhaust type | |
| Lubrication | Not required | |
| Mounting Orientation | Free | |
| *3:Impact resistance / Vibration resistance (m/s2) | 300/50 | |
| Enclosure | Dust-proof | |
*1: Based on JIS B 8375-1981 dynamic performance test. (Coil temperature of 20°C, at rated voltage, with no surge voltage suppressor)
*2: Operating torque with locking type manual operation is 0.2 N⋅m or less.
*3: Impact resistance: No malfunctions after testing using a drop-type impact tester under the following conditions: in the axial direction and at a right angle to the main valve and armature in both energized and non-energized states (once for each condition state). (Initial value)
Vibration resistance: No malfunctions occurred in a 1-sweep test between 45 and 2,000 Hz. The test was performed in both energized and non-energized states and in the axial direction and at right angles to the main valve and armature. (Initial value)
Structure Drawing
2-position single
2-position double
3-position closed center / exhaust center / pressure center
*Drawing shows closed center type
Component Parts
| Number | Part name | Material | Note |
|---|---|---|---|
| (1) | Body | Die-cast aluminum | Platinum silver |
| (2) | Piston Plate | Resin | Black |
| (3) | Piston | Resin | - |
| (4) | Spool Valve | Aluminum, H-NBR | - |
| (5) | End Cover | Resin | - |
| (6) | Spool Spring | SUS | - |
Replacement Parts
| Number | Part name | Material | Part number | Note |
|---|---|---|---|---|
| (7) | Sub-plate | Die-cast aluminum | DXT192-14-1*P | Platinum silver |
| (8) | Solenoid assembly | Epoxy, SUS | DXT170-C-□□□ | - |
| (9) | O-ring | NBR | KA00481 | Same as VZ1000 Series Same as VZ5000 Series |
*Thread type: No mark / Rc, F / G, N / NPT, T / NPTF
External Dimensions
(Unit: mm)
L plug connector (L): VZ3140-□L□□-01 dimensional drawing
(Unit: mm)
Grommet (G) (H): VZ3140-□(G, H)□□-01 dimensional drawings
(Unit: mm)
M plug connector (M): VZ3140-□M□□-01 dimensional drawing
*The number inside the box shown the drawing is for models with an indicator light / surge voltage suppressor.
(Unit: mm)
DIN terminal (D): VZ3140-□D□□-01 dimensional drawing
2-position double
(Unit: mm)
Grommet (G) (H): VZ3240-□(G, H)□□-01 dimensional drawings
Precautions
- *Product images may be representative images.
- *See the manufacturer's catalog for product information other than the above.