2-Color Display High-Precision Digital Pressure Switch ZSE30A(F)/ISE30A Series

Brand :

SMC

Caution

See catalog for specification details.
Product images may be representative images. Refer to the catalog for details.

Product Description

2-Color Display High-Precision Digital Pressure Switch ZSE30A(F)/ISE30A Series with 3-step setting.
[Features]
· Can copy up to 10 switches simultaneously.
· The settings of the master sensor can be copied to the slave sensors.
· Added vacuum range.
· Expanded the pressure range of positive pressure type to the vacuum range.
· 2 added outputs.

2-Color Display High-Precision Digital Pressure Switch ZSE30A(F)/ISE30A Series Details

2-Color Display High-Precision Digital Pressure Switch ZSE30A(F)/ISE30A Series product image

2-Color Display High-Precision Digital Pressure Switch ZSE30A(F)/ISE30A Series Specifications

Model Number Notation

Model number example

Model			ZSE30A (Vacuum pressure)	ZSE30AF (Compound pressure)	ISE30A (Positive pressure)
Rated pressure range			0.0 to -101.0 kPa	-100.0 to 100.0 kPa	-0.100 to 1.000 MPa
Display / Set pressure range			10.0 to -105.0 kPa	-105.0 to 105.0 kPa	-0.105 to 1.050 MPa
Pressure resistance			500 kPa	500 kPa	1.5 MPa
Display / Minimum set unit			0.1 kPa	0.1 kPa	0.001 MPa
Applicable fluid			Air / non-corrosive gas / non-flammable gas
Power supply voltage			12 to 24 V DC ±10%, Ripple (p-p) 10% or less (with reverse connection protection)
Current Consumption			40 mA or less
Switch output	-		NPN or PNP open collector 1 output, NPN or PNP open collector 2 outputs
	Max Load Current		80 mA
	Maximum applied voltage		28 V (at NPN output)
	Residual Voltage		1 V or less (with load current of 80 mA)
	Response time		2.5 ms or less (Response time selections with anti-chattering function: 20, 100, 500, 1,000, 2,000 ms can be selected)
	Short-circuit protection		Equipped
Repeat accuracy			±0.2% F.S. ±1 digit
Hysteresis	Hysteresis mode		Can be set from 0^{Note 1)}
Hysteresis	Window comparator mode		Can be set from 0^{Note 1)}
Analog Output	Voltage output^{Note 2)}	Output voltage (rated pressure range)	1 to 5 V ±2.5% F.S.		0.6 to 5 V ±2.5% F.S.
		Linearity	±1% F.S.
		Output impedance	Approx. 1 kΩ
	Current output^{Note 3)}	Output current (rated pressure range)	4 to 20 mA ±2.5% F.S.		2.4 to 20 mA ±2.5% F.S.
		Linearity	±1% F.S.
		Load impedance	Maximum load impedance: Power supply voltage 12 V: 300 Ω, Power supply voltage 24 V: 600 Ω Minimum load impedance: 50 Ω
Display Method			4-digit 7-segment LCD 2-color display (red/green)
Display accuracy			±2% F.S. ±1 digit (at ambient temperature of 25 ±3°C)
Status LEDs			Lights up when switch output is turned ON, OUT1: green, OUT2: red
Environmental resistance	Enclosure		IP40
	Operating temperature range		During operation: 0 to 50°C, During storage: -10 to 60°C (No condensation or freezing)
	Operating Humidity Range		When operating/stored: 35 to 85% RH (no condensation)
	Withstand Voltage		1,000 V AC for 1 min. between terminals and housing
	Insulation Resistance		50 MΩ or more (500 V DC measured via megohmmeter) between terminals and housing
Temperature characteristics			±2% F.S. (25°C reference)
Lead wire with connector			Oilproof vinyl heavy-duty cable, 3 cores ø3.5 (3.5‑mm diameter) 2 m Oilproof vinyl heavy-duty cable, 4 cores Conductor area: 0.15 mm²(AWG26), Insulator O.D.: 1.0 mm
Standard			CE UL/CSA (E216656)

Note 1) If applied pressure fluctuates near the set value, set the hysteresis above the fluctuation range to prevent chattering.
Note 2) When analog voltage output is selected, analog current output cannot be selected at the same time.
Note 3) When analog current output is selected, analog voltage output cannot be selected at the same time.

Piping specifications

Model		01	N01	C4H	C6H	N7H	C4L	C6L	N7L
Piping connection port diameter	-	R1/8 M5 × 0.8	NPT1/8 M5 × 0.8	-	-	-	-	-	-
	One-touch fitting Straight type	-	-	ø4 (4‑mm diameter) ø5/32 (5/32‑inch diameter)	ø6 (diameter 6 mm)	ø1/4 (1/4‑inch diameter)	-	-	-
	One-touch fitting Elbow type	-	-	-	-	-	ø4 (4‑mm diameter) ø5/32 (5/32‑inch diameter)	ø6 (diameter 6 mm)	ø1/4 (1/4‑inch diameter)
Wetted parts material	Sensor pressure receiving area	Sensor pressure receiving area: Silicon
Wetted parts material	Piping port	C3602 (electroless nickel plating) O-ring: HNBR		PBT, POM, SUS304, C3604 (electroless nickel plating) O-ring: NBR
Weight	Including lead wire with connector (3 cores, 2 m)	81 g		70 g	71 g	73 g	75 g	73 g	75 g
	Including lead wire with connector (4 cores, 2 m)	85 g		74 g	75 g	77 g	79 g	77 g	79 g
	Excluding lead wire with connector	43 g		32 g	33 g	35 g	37 g	35 g	37 g

Analog Output

Voltage output / Current output

Range	Rated pressure range	A	B	C
For vacuum pressure	0.0 to -101.0 kPa	-	0	-101 kPa
For compound pressure	-100.0 to 100.0 kPa	-	-100 kPa	100 kPa
For positive pressure	-0.100 to 1.000 MPa	-0.1 MPa	0	1 MPa

Internal Circuits and Wiring Examples

-N / -P

-A / -B

2-Color Display High-Precision Digital Pressure Switch ZSE30A(F)/ISE30A Series Example Dimensions

Z/ISE30A(F)-01-□-□□□□ Z/ISE30A(F)-N01-□-□□□□

(Unit: mm)

Z/ISE30A(F)-01-□-□□□□ Z/ISE30A(F)-N01-□-□□□□ dimensional drawing

Z/ISE30A(F)-C4H-□-□□□□

(Unit: mm)

Z/ISE30A(F)-C4H-□-□□□□ dimensional drawing

Z/ISE30A(F)-C6H-□-□□□□

(Unit: mm)

Z/ISE30A(F)-C6H-□-□□□□ dimensional drawing