Multi-Channel Digital Pressure Sensor Controller PSE200 Series

Brand :

SMC

Caution

See catalog for specification details.
Product images may be representative images. Refer to the catalog for details.

Product Description

Multi-Channel Digital Pressure Sensor Controller PSE200 Series that can monitor 4 pressure sensors from a single controller.
[Features]
· Auto-shift function / Auto-preset function / Auto-identification function / Copy function / Channel scan function
· Zero clear function / Keylock function / Peak and bottom values hold and display function / Unit switching function.
· Display value calibration function / Anti-chattering function.
[Applications]
· Used for suction confirmation / leak testing / ejector supply pressure check / placement verification / hydraulic cylinder crimp check.
· Cleaning line supply pressure check / suction verification of work pieces containing moisture.

Multi-Channel Digital Pressure Sensor Controller PSE200 Series Details

Multi-Channel Digital Pressure Sensor Controller PSE200 Series product image

Multi-Channel Digital Pressure Sensor Controller PSE200 Series Specifications

Model Number Notation

Model number example

Model		PSE200	PSE201
Power supply voltage		12 to 24 V DC ±10%, Ripple (p-p) 10% or less (with reverse connection protection)
Current Consumption		55 mA or less (Current consumption for sensor is not included)
Power supply voltage for sensor		[Power supply voltage] -1.5 V
Power supply current for sensor^{Note 1)}		Maximum 40 mA (100 mA maximum for the total power supply when 4 sensors are input)
Sensor input	-	1 to 5 V DC (Input impedance: approx. 800 kΩ)
	Number of inputs	4 inputs
	Input protection	With excess voltage protection (Up to 26.4 V)
Switch output	-	NPN open collector output: 5 outputs (Sensor input 1CH: 2 outputs, 2 to 4CH: 1 output)	PNP open collector output: 5 outputs (Sensor input 1CH: 2 outputs, 2 to 4CH: 1 output)
	Max Load Current	80 mA
	Maximum applied voltage	30 V	-
	Residual Voltage	1 V or less (with load current of 80 mA)
	Response time	5 ms or less (Response time selections with anti-chattering function: 20 ms, 160 ms, 640 ms)
	Short-circuit protection	Equipped
Repeat accuracy		±0.1% F.S. ±1 digit
Hysteresis	Hysteresis mode	Adjustable (can be set from 0)
Hysteresis	Window comparator mode	Fixed (3 digits)
Display Method		For measured value display: 4-digit 7-segment display, Display color: orange (Sampling frequency: 4 times / sec) For channel display: 1-digit 7-segment display, Display color: red
Display accuracy (at an operating temperature of 25°C)		±0.5% F.S. ±1 digit
Status LEDs		Red (lights up when output is turned ON)
Auto-shift input		Non-voltage input (reed or solid state), Input 10 ms or more, Independently controllable auto-shift function ON/OFF
Auto-identification function		With auto-identification function^{Note 2)}
Environmental resistance	Enclosure	Front face: IP65 (when panel mounted), Others: IP40^{Note 3)}
	Ambient temperature range	During operation: 0 to 50°C, During storage: -10 to 60°C (No condensation or freezing)
	Ambient humidity range	When operating/stored: 35 to 85% RH (no condensation)
Temperature characteristics		±0.5% F.S. (25°C reference)
Connection		Power supply / output connection: 8P connector, Sensor connection: e-con
Material		Housing: PBT, Display: transparent nylon, Back rubber cover: CR
Weight		60 g (excluding power supply / output connection cable)
Power supply / Output connection cable		Heat-resistant heavy-duty cable, 8 cores ø4.8 (4.8‑mm diameter) 2 m, Conductor area: 0.15 mm² Insulator O.D.: 0.9 mm
Standard		CE / CSA

Note 1) If the Vcc and 0 V side of the sensor input connector are short circuited, the inside of the controller will be damaged.
Note 2) Auto-identification function comes with the "PSE53□ Series" only. Other series made by the same manufacturer (PSE540, 560, 570) are not equipped with this function.
Note 3) IP40 specification when using the □48 conversion adapter.

Internal Circuits and Wiring Examples

PSE200-(M)□

NPN open collector 5 outputs + Auto-shift 1 input specification

PSE201-(M)□

PNP open collector 5 outputs + Auto-shift 1 input specification

Multi-Channel Digital Pressure Sensor Controller PSE200 Series Dimensions

PSE200/PSE201

(Unit: mm)

PSE200/PSE201 dimensional drawing

Front Protective Cover + Panel-Mount Adapter

Multi-Channel Digital Pressure Sensor Controller PSE200 Series (Front Protective Cover + Panel-Mount Adapter) dimensional drawing