Digital Pressure Switch (Built-In Regulator Type) ISE35 Series

Brand :

SMC

Caution

See catalog for specification details.
Product pictures are representations. CAD data is not supported for some model numbers.

Product Description

A pressure switch made by SMC.

[Features]
· Can be mounted to modular type
· Can be mounted to ARM10/11 series
· Pressure display unit can be changed
· Has a chatter-prevention function
· Power-saving mode

Specifications of Digital Pressure Switch (Built-in Regulator Type) ISE35 Series

External appearance of digital pressure switch (built-in regulator type)

Lead entry specification ISE35-N (Wiring bottom entry)

Lead entry specification ISE35-R (Wiring top entry)

Option 1: ISE35-□-□-□L (Lead with connector [2 m in length])

Option 2: ISE35-□-□-□□A (AR/AW Series installation kit)

Option 2: ISE35-□-□-□□B (ARM10/11 Series mounting kit)

Applicable Series

A product series that this product can be installed on.

Product series name	Product series model
F.R.L. combination	AC20・AC25・AC30・AC50・AC55・AC60
	AC20A・AC30A・AC40A・AC50A・AC60A
	AC20B・AC25B・AC30B・AC50B・AC55B・ AC60B
	AC20C・AC25C・AC30C・AC40C
	AC20D・AC30D・AC40D
Regulator	AR20 (K)・AR25 (K)・AR30 (K)・AR40 (K)・ AR50 (K)・AR55 (K)・AR60 (K)
Filter Regulator	AW20 (K)・AW30 (K)・AW40 (K)・AW60 (K)
Mist separator Regulator	AWM20・AWM30・AWM40
Micro mist separator Regulator	AWD20・AWD30・AWD40
Small manifold Regulator	ARM10・ARM11
Direct acting precision regulator	ARP20 (K)・ARP30 (K)・ARP40 (P)

Model Number Notation

Output specifications

25: NPN output
65: PNP output

Unit specifications

Blank: With unit switching function * 1
M: SI unit fixed * 2
P: Pressure unit: psi (default) with unit switching function * 1

* 1Under the New Measurement Act of Japan, units with the unit switching function cannot be used in Japan.
* 2Fixed unit: MPa

Specifications

Model		ISE35
Rated pressure range		0 to 1 MPa
Display / Set pressure range		-0.1 to 1 MPa
Withstand pressure		1.5 MPa
Display / Minimum set unit		0.01 MPa
Fluid		Air, non-corrosive gases, nonflammable gas
Power supply voltage		12 to 24 V DC ± 10%, ripple (p-p) 10% or less (With reverse connection protection)
Current Consumption		55 mA or less (At no load)
Switch output		NPN or PNP open collector output, 1 output
-	Maximum load current	80 mA
	Maximum applied voltage	30 V (at NPN output)
	Residual voltage	1 V or less (with load current of 80 mA)
	Response Time	1s (0.25, 0.5, 2, 3s selection)
Short-circuit protection		Yes
Repeatability		±1%F.S
Hysteresis	Hysteresis mode	Adjustable (can be set from 0)
Hysteresis	Window Comparator Mode	Adjustable (can be set from 0)
Display		3-digit 7-segment display, 2-color display (red/green) Linkable with switch
Display accuracy		±2% F.S. ±1 digit (At 25°C ± 3°C)
Indicator light		OUT: Lights when ON (Green)
Environment	Protective Enclosure	IP40
Environment	Operating temperature range	-5 to 50℃ (No condensation or freezing)
Lead wire with connector (Option: For L)		Oil-resistant cabtire cord 3-core ø3.4 (diameter: 3.4 mm) 2 m Conductor cross-sectional area: 0.2 mm^2 (AWG25) Insulator outer diameter: 1.16 mm
Weight		Approx. 14 g (main unit only) Approx. 38 g (Including lead wire with connector)
Standards		CE UL／CSA (E216656)

Internal Circuit and Connection

-25 NPN (1 Output)

-65 PNP (1 Output)

Dimensions

(Units: mm)

Dimensional drawing of digital pressure switch (Built-in regulator type)

Option 1: Dimensional drawing of lead wire with connector

*See the SMC catalog for specification details.
*The product image is a representative image only.