Digital Pressure Sensor [E8F2]
Brand :
OMRON
Caution
- Product image is for representation and may differ from actual product.
Please check product catalog information and part number below before placing order.
Product Description
Pressure sensor with easy-to-read LED display
[Features]
· Pressure status can be checked at a glance using digital and bar displays
· Chattering prevention function (when set to hysteresis mode) prevents incorrect output due to momentary pressure changes
· Perform automatic teaching simply by teaching pressure values for products with acceptable and unacceptable levels of quality
Drawing
E8F2 model
E89-F4 model
* Compatible panel thickness: 1.2 to 4 mm
Product Specifications
| Item | Type | ||||
|---|---|---|---|---|---|
| NPN output | E8F2-A01C model | E8F2-B10C model | E8F2-AN0C model | ||
| PNP output | E8F2-A01B model | E8F2-B10B model | E8F2-AN0B model | ||
| Power supply voltage | 12 to 24 V DC ±10% Ripple (pp) 10% or less | ||||
| Current Consumption | 70 mA or less * 1 | ||||
| Pressure type | Gauge pressure | ||||
| Pressure range | 0 to 100 kPa | 0 to 1 MPa | 0 to -101 kPa | ||
| Pressure setting range | 0 to 100 kPa | 0 to 1 MPa | 0 to -101 kPa | ||
| Withstand pressure | 400 kPa | 1.5 MPa | 400 kPa | ||
| Fluid | Non-corrosive gas, non-flammable gas | ||||
| Operating Mode | Hysteresis mode, wind mode, auto teaching mode | ||||
| Repeatability (ON/OFF output) | Within ±1% (F.S.) | ||||
| Linearity (Linear output) | Within ±1% (F.S.) | ||||
| Response Time (ON/OFF output) | 5 ms or less | ||||
| Linear output | 1 to 5 V ±5%F.S (Output impedance: 1 kΩ, allowable load resistance: 500 kΩ or more) | ||||
| Output format (ON/OFF) | Open collector output (NO/NC) (Depends on NPN/PNP output format) | ||||
| Load current | 30 mA or less | ||||
| Output applied voltage | 30 V DC or less | ||||
| Residual voltage | NPN open collector output type 1 V or less (When the load current is 30 mA) PNP open collector output type 2 V or less (When the load current is 30 mA) | ||||
| Display method * 2 | 3.5 digit digital display by LED (red), LED bar display (green), When the output transistor is ON, the orange LED lights up (2 outputs are independent), and the LED unit display (Green) | ||||
| Display accuracy | ±3% F.S. ±1 digit or less | ||||
| Protection circuit | Reverse connection, load short circuit protection | ||||
| Ambient temperature range | During operation: 0 to +55°C, when stored: -10 to +60℃ (However, do not freeze) | ||||
| Ambient humidity range | When operating/saving: 35 to 85% RH each (However, no condensation) | ||||
| Influence of temperature | ±3% F.S. or less | ||||
| Influence of voltage | ±1.5% F.S. or less | ||||
| Insulation Resistance | 100 MΩ or more (at 500 V DC mega) Charge unit batch and case | ||||
| Withstand Voltage | 1,000 V AC 1 min | ||||
| Vibration (durable) | 10 to 500 Hz, double amplitude 1 mm 150 m/s^2, 11 min × 3 sweep in X, Y, Z directions | ||||
| Shock (durable) | 300 m/s2 3 times each in the X, Y, and Z directions | ||||
| Protective Enclosure | IEC standard IP50 | ||||
| Pressure port | R (PT) 1/8 tapered thread and M5 female thread | ||||
| Connection method | Pre-wired type (Standard cord length 2 m) | ||||
| Cord | UL certification code | ||||
| Mass (In packaged state) | Approx. 110 g | ||||
| Material | Pressure port | Die-cast aluminum | |||
| Case | Heat-resistant ABS | ||||
| Accessories | Mounting bracket, instruction manual | ||||
* 1. Approximately 43 mA when operating power saving function.
* 2. Display example of digital display.