(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

Air Amplifying Nozzle, TAIFUJet Series (Compressor Specifications, Flat Type, Resin-Made)

Air Amplifying Nozzle, TAIFUJet Series (Compressor Specifications, Flat Type, Resin-Made)

A unique flat design for a more even injection of air. Made from PPS with excellent heat and chemical resistance.
A low-noise product for use in work environments.

[Features]
· TAIFUJet series products have a novel structure that traps the surrounding air and then powerfully blows the amplified air. · A unique design with an even and strong injection force, and with excellent low-noise and straight injection performance.
· Energy saving (volume of amplified air) and with a powerful impact performance: TAIFUJet features a unique design that traps and amplifies the surrounding air. Powerful air injection, even with low air consumption.
· Low-noise design: TAIFUJet, in addition to featuring a work environment-friendly and low-noise design, is available in flat and round types to fit the application.
· Evenness: TAIFUJet features a unique design that injects air more evenly. By phasing the top and bottom injection ports and air suction holes, an even spray across the entire spray width can be obtained. Attenuation of the impact force as distance increases is small, allowing for the air blower to operate more efficiently.

PDF

Part Number

Configured Part Number is shown.

 
Part Number
1/4MTF-F42-16-010PPS
1/8MTF-F24-8-010PPS-IN
3/8MTF-F121-46-010PPS
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSNominal Mounting Screw Injection Width
(mm)
Heat Resistant Temperature
(℃)

SGD 31.68

1 Piece(s) 6 Day(s) 10R1/442130

SGD 19.52

1 Piece(s) 6 Day(s) 10R1/824130

SGD 81.56

1 Piece(s) 7 Day(s) 10R3/8121120

Loading...

  1. 1

Basic Information

Spray Pattern Straight Air Source Compressor Material PPS (Polyphenylene sulfide)
Mounting Angle Flat Blow Type Amplification type Type Air Nozzle
Applicable Fluid Air, compressed air Operating Pressure Range(MPa) ::0.7

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(65) 6733 7211 / FAX:(65) 6733 0211
9:00am - 6:00pm (Monday - Friday)