• Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 to 20:00 (SGT) 26/5/2019. We apologize for the inconvenience.

Outside Gasket Handle A-463

Outside Gasket Handle A-463

· 3 point tightening mechanism developed for the outside system.
· No caulking, etc. required on the mounting part for attaching the handle to the outside of the packing.
· Large stroke can be obtained with a slim body.
· Upper and lower rod ends use plastic rollers, and the operation is smooth.
· For rod seat, recommended hinge B-71-3 is compatible with installation.
· Therefore, we do not choose right or left side use of the door (panel cut is also vertically symmetrical). Even if the size of the housing changes, it is not necessary to change the length of the rod.
· Small and slim pin tumbler lock with high security is used.
· Left/right combination type (exchange left and right by turning over the control center)


Part Number

Configured Part Number is shown.


Part Number
Part NumberVolume DiscountDays to ShipProduct Code
7 Day(s) or more 03303


  1. 1

Basic Information

Material Zinc Alloy Finish Satin Nickel Chrome Plating Plate Thickness(mm) 2.3
Accessory Clasp Full Length(mm) 155 Overall width(mm) 29
Full height(mm) 24.7

Please check the type/dimensions/specifications of the part A-463 in the Outside Gasket Handle A-463 series.

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(65) 6335 0315 / (65) 6733 7211 / FAX:(65) 6733 0211
9:00am - 6:00pm (Monday - Friday)
9:00am - 3:00pm (Saturday)