(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

Recoil Tap

Recoil Tap

[Features]
· Recoil taps differ from ordinary taps, designed for exclusive use with screw thread inserts (STI). They have a large diameter but the same pitch as a standard tap in order to accommodate the Recoil Inserts.
· Recoil Taps are manufactured to precise standards from High Speed steel (HSS or HSS-E) with ground threads and are available in Intermediate and Bottoming leads.
· In addition to hand taps, Spiral Point and Spiral Flute machine taps are also available for mass production purposes. In addition, for all spark plug applications pilot nose taps are available, which do not require a special recoil drill. The Recoil thread inserts when installed into a correctly tapped hole will provide the applicable internal thread tolerance for the installed bolt.
· Intermediate tap...The most commonly used tap, mainly used for through hole applications. 4 -thread lead.
· Bottoming tap...Used when tapping to the bottom of a blind hole. 2-Thread lead, and is normally used after a taper tap or intermediate tap.

PDF

Part Number

Configured Part Number is shown.

 
Part Number
45035
47105
48105
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSThread Diameter(Inserted)M
(mm)
Screw Type for Tap Pitch
(mm)

SGD 27.01

1 Piece(s) 7 Day(s) or more 103Coarse0.5

SGD 40.59

1 Piece(s) 10 Day(s) or more 1010Fine1.25

SGD 47.92

1 Piece(s) 10 Day(s) or more 1010Spark Plug1

Loading...

  1. 1

Basic Information

Type Tool Sales Unit Low Quantity (can be purchased from one) Application Insertion
Tapped Medium Tapping

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(65) 6733 7211 / FAX:(65) 6733 0211
9:00am - 6:00pm (Monday - Friday)