Kalei ST Nut

Kalei ST Nut

M3 to M6 nuts can be mounted with low pressure input, press nuts.
· Press fit a portion of the hexagonal body of the ST nut to the base material using existing pneumatic/hydraulic press to prevent rotation of the nut.
· Metal flow to the groove under the neck prevents the nut from coming out.
· For the mounting direction of the ST nut, it can be press fit into both the punch side and press side of the base material.
· Due to press-fitting, post-processing such as rust-proof processing, sputtering treatment for weld-on nuts, etc., not required.
· Has little effect on the base material thanks to low pressure input. Even if the end face distance is short, the base material does not deform.
· Optimal for reducing man-hours with simultaneous multiple press-fitting operations occurring on a flat plate. Can also be mounted on aluminum parts.
· Can be used on copper material power supply busbars, etc. Can be used for coating / plating / ZAM / treated steel plate, automobile parts, etc.

Part Number

Configured Part Number is shown.

Part Number
Part NumberVolume DiscountDays to ShipThread Nominal (M) Min. Thickness
3 Day(s) or more 31
3 Day(s) or more 31.5
3 Day(s) or more 41
5 Day(s) or more 41.5
3 Day(s) or more 51
5 Day(s) or more 51.5
3 Day(s) or more 61
5 Day(s) or more 61.5
5 Day(s) or more 63


  1. 1

Basic Information

Material Iron Surface Treatment Trivalent Chromate Screw Thread Types Metric coarse
Application / Functions Crimped Sales Unit Low Quantity (can be purchased from one) Surface Treatment (Details) Trivalent White

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(65) 6335 0315 / (65) 6733 7211 / FAX:(65) 6733 0211
9:00am - 6:00pm (Monday - Friday)
9:00am - 3:00pm (Saturday)