(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

Small X-Axis Rack-and-Pinion Stage TAR

Small X-Axis Rack-and-Pinion Stage TAR

A small rack-and-pinion stage.

[Features]
- Rack-and-pinion approach for quick feeding.
- Does not stick out of the main body, even if the stage surface is moved with a full stroke.
- The feed knob movement area plus the and the main body area equals the effective installation area.
- Dovetail grooves used for the travel guide.
- Has a mechanism for correcting rattling.
- Mounting and fixing holes are bored in both the upper and lower surfaces.
- When the stage is turned over, its lower surface can be used as a stage surface.
- Countersunk mounting screw holes.
- Can be fixed from either above or below.
- Fixing from above: M2, Fixing from below: M3/M4.
- Materials: stage: brass and black chrome plating (stage), brass and chrome plating (bottom spacer).

PDF

Part Number

Configured Part Number is shown.

 
Part Number
TAR-25121
TAR-25161
TAR-2581
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSStroke (Range Selectable) Stroke (X Distance)
(mm)
Table Straightness
(µm)
Table Parallelism
(µm)

SGD 549.70

1 Piece(s) 7 Day(s) or more 10±30mm or More±454080

SGD 659.00

1 Piece(s) 7 Day(s) or more 10±30mm or More±655080

SGD 438.70

1 Piece(s) 7 Day(s) or more 10±10 to 30mm±253050

Loading...

  1. 1

Basic Information

Table Size (Length) L (Range Selectable)(mm) 26~40 Table Size (Width) W (Range Selectable)(mm) ~25 Load Capacity (Range Selectable)(N) 5~30
Feeding Method Rack & Pinion Table Material Brass Table Surface Treatment Low Temperature Black Chrome Plating
Travel Guide Dovetail Slide Table Size (Thickness) H (Range Selectable)(mm) 20.1~25 Product Category Main Body
Table Size (Length) L(mm) 30 Table Size (Width) W(mm) 25 Load Capacity(N) 24.5
Table Size (Thickness) H(mm) 22 Type X-Axis Stages Feed Knob Position Holoaxial side
Clamp Clamp Lever Reversed Standard Through Hole (Table Center Hole) No
Feed method (rack & pinion type) Standard

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(65) 6733 7211 / FAX:(65) 6733 0211
9:00am - 6:00pm (Monday - Friday)