• Due to the typhoon in Japan, large-scale blackout have occurred in Narita city where Misumi Shipping center is located, and the recovery is being delayed. (Newspaper article https://the-japan-news.com/news/article/0005997110 source: The Japan News) Because of the above reason, delivery of some products may be delayed. We apologize for any inconvenience and thank you for your understanding.

Small XY-Axis Block Stage TAS

Small XY-Axis Block Stage TAS

*The CAD data for this series is being revised. This will be available as soon as modifications are complete

[Features]
- Move the stage with a hex wrench.
- Screws are used for micro-feeding.
- Dovetail grooves used for the travel guide.
- Has a mechanism for correcting rattling.
- New design with lowered stage height.
- New design with lowered stage height.
- Effective for limited spaces or embedded use.
- Mounting method: Mounting screw holes are countersunk.
- It can therefore be fixed from either above or below.
- [Fixing from above] TAS-251: M2, TAS-401: M3 [Fixing from below] TAS-251: M3, TAS-401: M4, material and finishing are brass and black chrome plating.

PDF

Part Number

Configured Part Number is shown.

 
Part Number
TAS-252
TAS-402
Part NumberVolume DiscountDays to ShipRoHSTable Size (Length) L (Range Selectable)
(mm)
Table Size (Width) W (Range Selectable)
(mm)
Load Capacity (Range Selectable)
(N)
Table Size (Length) L
(mm)
Table Size (Width) W
(mm)
Load Capacity
(N)
Stroke (X Distance)
(mm)
Stroke (Y Distance)
(mm)
Table Size (Thickness) H
(mm)
Table Straightness
(µm)
Table Parallelism
(µm)
32 Day(s) or more 10~25~255~30252524.5±3±32620100
32 Day(s) or more 1026~4026~4030.1~50404049±7±73020100

Loading...

  1. 1

Basic Information

Stroke (Distance along X-Axis) (Range Selectable)(mm) ~ ±10mm Stroke (Distance along Y-Axis) (Range Selectable)(mm) ~ ±10mm Table Material Brass
Table Surface Treatment Low Temperature Black Chrome Plating Travel Guide Dovetail Slide, Feed Screw Table Size (Thickness) H (Range Selectable)(mm) 25.1~30
Through Hole (Table Center Hole) Presence Feed Knob Position Holoaxial center Clamp No
Reversed Standard Feed method (feed screw type) Hex wrench operation Feed method (feed pitch)(mm) 0.5mm

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(65) 6335 0315 / (65) 6733 7211 / FAX:(65) 6733 0211
9:00am - 6:00pm (Monday - Friday)
9:00am - 3:00pm (Saturday)