(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

  • Please Note our New Address (effective April 1, 2024): 331 North Bridge Rd, #05-01 Odeon 331, Singapore 188720.

Corrosion-Resistant SUS304 Fitting, Straight

Corrosion-Resistant SUS304 Fitting, Straight
  • On Sale Till 31/03/2024

If strength is required, optimal for chemical atmospheres.

PDF

Japanese Only

Corrosion-Resistant Tube Fitting Stainless SUS304 - Straight Specifications

Corrosion-resistant Tube Fitting Stainless SUS304 - Straight appearance

Corrosion-resistant Tube Fitting Stainless SUS304 - Straight appearance

Corrosion-resistant Tube Fitting Stainless SUS304 - Straight dimensional drawing

Corrosion-resistant Tube Fitting Stainless SUS304 - Straight dimensional drawing

Corrosion-resistant Tube Fitting Stainless SUS304 - Straight dimensional drawing (metric thread type)

Corrosion-resistant Tube Fitting Stainless SUS304 - Straight dimensional drawing
(metric thread type)

Usable fluids: air, water (see conditions*), other (see conditions*)
Maximum operating pressure: 1.0 MPa
Operating vacuum pressure: -100 kPa
Operating temperature range: 0 to 60°C (no freezing)

Warning

  • *When the fluid used is water or other liquids, the following conditions must be observed.
  • When using water or other liquids, make sure the surge pressure stays below the maximum operating pressure.
  • Be sure to use an insert ring when using water or other liquids.
  • For chemicals, mixed gases, etc., compliance with the specifications may vary depending on usage conditions, so please check before using.

Size Chart

FormatTube Outer Diameter
øD
RABLTube End
C
Hex
H
Orifice Diameter
(ømm)
Mass
(g)
PC4-M5SUS4M5 × 0.8320.117.115101.85.9
PC4-M6SUSM6 × 1421.136.2
PC4-01SUSR1/887.8
PC4-02SUSR1/41115.11415
PC6-M5SUS6M5 × 0.8322.219.217.1121.88.5
PC6-M6SUSM6 × 1423.238.8
PC6-01SUSR1/8822.718.74.68.7
PC6-02SUSR1/41124.71417
PC6-03SUSR3/81223.717.41726
PC8-01SUS8R1/8827.923.918.214615
PC8-02SUSR1/41126.620.67
PC8-03SUSR3/81223.917.61722
PC10-01SUS10R1/8830.526.520.917622
PC10-02SUSR1/41130248.520
PC10-03SUSR3/81229.523.225
PC10-04SUSR1/21530.522.32147
PC12-02SUS12R1/41136.130.123.5218.541
PC12-03SUSR3/81232.125.81134
PC12-04SUSR1/21534.125.947
PC16-03SUS16R3/81239.533.225241156
PC16-04SUSR1/21541.533.31363

Units: mm

  • *Taper thread type L dimensions are reference dimensions after tightening with screws.

Applicable Tube Size

Millimeter size: ø4 (diameter 4 mm), ø6 (diameter 6 mm), ø8 (diameter 8 mm), ø10 (diameter 10 mm), ø12 (diameter 12 mm), ø16 (diameter 16 mm)

Applicable Tube Size

Metric ThreadM5 × 0.8, M6 × 1
Taper Pipe ThreadR1/8, R1/4, R3/8, R1/2
  • *See the manufacturer's catalog for other precautions and important notes.
Part Number
PC4-01SUS
PC4-02SUS
PC4-M5SUS
PC4-M6SUS
PC6-01SUS
PC6-02SUS
PC6-03SUS
PC6-M5SUS
PC6-M6SUS
PC8-01SUS
PC8-02SUS
PC8-03SUS
PC10-01SUS
PC10-02SUS
PC10-03SUS
PC10-04SUS
PC12-02SUS
PC12-03SUS
PC12-04SUS
PC16-03SUS
PC16-04SUS
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipApplicable Tube O.D.1
(φ)
Connection Screw Type 1 Nominal of Thread 1

SGD 39.40

1 Piece(s) 4 Day(s) or more 4R1/8

SGD 41.87

1 Piece(s) 4 Day(s) or more 4R1/4

SGD 48.96

1 Piece(s) 4 Day(s) or more 4MM5×0.8

SGD 48.96

1 Piece(s) 10 Day(s) or more 4MM6×1

SGD 50.68

SGD 26.28

1 Piece(s) Same day 6R1/8

SGD 41.53

SGD 26.45

1 Piece(s) Same day 6R1/4

SGD 51.03

1 Piece(s) 4 Day(s) or more 6R3/8

SGD 48.59

1 Piece(s) Same day 6MM5×0.8

SGD 48.59

SGD 25.75

1 Piece(s) Same day 6MM6×1

SGD 50.22

1 Piece(s) 11 Day(s) or more 8R1/8

SGD 44.51

SGD 27.60

1 Piece(s) Same day 8R1/4

SGD 52.41

1 Piece(s) 4 Day(s) or more 8R3/8

SGD 68.76

1 Piece(s) 4 Day(s) or more 10R1/8

SGD 68.76

1 Piece(s) 11 Day(s) or more 10R1/4

SGD 68.76

1 Piece(s) 4 Day(s) or more 10R3/8

SGD 68.76

1 Piece(s) 4 Day(s) or more 10R1/2

SGD 72.32

1 Piece(s) 4 Day(s) or more 12R1/4

SGD 72.32

1 Piece(s) 11 Day(s) or more 12R3/8

SGD 72.32

1 Piece(s) 4 Day(s) or more 12R1/2

SGD 81.44

1 Piece(s) 11 Day(s) or more 16R3/8

SGD 77.32

1 Piece(s) 10 Day(s) 16R1/2

Loading...

  1. 1

Basic Information

Types One-Touch Couplings Fitting Type Screw Mount Direction Applicable Fluid Water / Air / Chemicals、Solvent / Mixed Gas
Body Material SUS304 Application Standard/Mini / Foods・Drug-Related Screw Mounting, Direction Straight
Operating Temperature(°C) 0::60

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(65) 6733 7211 / FAX:(65) 6733 0211
9:00am - 6:00pm (Monday - Friday)