(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 21/4/2024 to 6:00 (SGT) 22/4/2024. We apologize for the inconvenience.
- Please Note our New Address (effective April 1, 2024): 331 North Bridge Rd, #05-01 Odeon 331, Singapore 188720.
For Spatter-resistant, Tube Fitting Brass Elbow
The main body and release ring are made of brass for superior flame retardancy and sputtering resistance.
[Features]
· Available sealing rubber materials include HNBR, FKM, and NBR.
· Ideal for environments exposed to sparks.
· Release ring made of brass offers excellent flame retardancy and sputter resistance.
· The type with a cover prevents dust and sputter from getting through to the internal fittings.
· An optional sputter cover prevents fine sparks from entering.
· By using a release ring cover (CS – sold separately), sparks that penetrate through the gap between the release ring and the tube cannot get close.
Japanese Only
Tube Fitting Brass - Elbow Specifications
Elbow appearance
Elbow dimensional drawing (metric thread)
Elbow dimensional drawing (for taper pipe thread)
Usable fluids: air, water (see conditions*), heat transfer oil (see conditions*)
Maximum operating pressure: 1.0 MPa
Operating vacuum pressure: -100 kPa
Operating temperature range: HNBR specification: 0 to 100°C, FKM specification: 0 to 120°C (no freezing)
- *When the fluid used is water or heat transfer oil, the following conditions must be observed.
- 1. When using water or heat transfer oil, make sure the surge pressure stays below the maximum operating pressure.
- 2. When using water or heat transfer oil, be sure to use an insert ring (see p. 858 of catalog).
Compatible Sizes
Tube sizes
Millimeter size: φ4 (diameter 4 mm), φ6 (diameter 6 mm), φ8 (diameter 8 mm), φ10 (diameter 10 mm), φ12 (diameter 12 mm)
Thread size
Metric thread: M5×0.8
Taper pipe thread: R1/8, R1/4, R3/8, R1/2
| Format | Tube Outer Diameter φD1 | Tube Outer Diameter φD2 | R | A | B | L | φP1 | φP2 | Tube End C1 | Tube End C2 | E | Hex H | Orifice Diameter (φmm) | Mass (g) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| KL4-M5□ | 4 | 6 | M5 × 0.8 | 3 | 19.8 | 22.1 | 10.5 | 10.4 | 17.6 | 15 | 20.7 | 10 | 1.8 | 18 |
| KL4-01□ | R1/8 | 8 | 22.8 | 24.1 | 2.5 | 21 | ||||||||
| KL4-02□ | R1/4 | 11 | 25.8 | 25 | 14 | 31 | ||||||||
| KL6-M5□ | 6 | 8 | M5 × 0.8 | 3 | 22 | 25.3 | 12.5 | 12.4 | 19.5 | 16 | 23.1 | 12 | 1.8 | 26 |
| KL6-01□ | R1/8 | 8 | 25 | 27.3 | 4 | 28 | ||||||||
| KL6-02□ | R1/4 | 11 | 28 | 28.2 | 14 | 36 | ||||||||
| KL6-03□ | R3/8 | 12 | 29.8 | 29.7 | 17 | 49 | ||||||||
| KL8-01□ | 8 | 10 | R1/8 | 8 | 28 | 31.3 | 14.5 | 14.4 | 20.2 | 17 | 24.8 | 14 | 6 | 36 |
| KL8-02□ | R1/4 | 11 | 31 | 32.2 | 41 | |||||||||
| KL8-03□ | R3/8 | 12 | 32.8 | 33.7 | 17 | 55 | ||||||||
| KL10-01□ | 10 | 12 | R1/8 | 8 | 32.5 | 37.8 | 18.5 | 18.6 | 23.2 | 19.5 | 29.3 | 17 | 6 | 67 |
| KL10-02□ | R1/4 | 11 | 35.5 | 38.8 | 8 | 69 | ||||||||
| KL10-03□ | R3/8 | 12 | 36.5 | 39.5 | 78 | |||||||||
| KL10-04□ | R1/2 | 15 | 39.5 | 40.6 | 22 | 104 | ||||||||
| KL12-02□ | 12 | 14 | R1/4 | 11 | 37.5 | 42.3 | 21.5 | 21.6 | 26.3 | 23 | 33.4 | 21 | 8 | 107 |
| KL12-03□ | R3/8 | 12 | 38.5 | 43 | 9 | 113 | ||||||||
| KL12-04□ | R1/2 | 15 | 41.5 | 44.1 | 22 | 129 |
Units: mm
- *Taper thread type L dimensions are reference dimensions after tightening with screws.
- *For the □ at the end of the order format, input -F if you want the FKM sealing rubber material.
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Seal Material | Operating Temperature (°C) | Applicable Tube O.D.1 (φ) | Connection Screw Type 1 | Nominal of Thread 1 |
|---|---|---|---|---|---|---|---|---|---|---|
SGD 10.85 | 1 Piece(s) | 4 Day(s) or more | 10 | [H-NBR] HNBR | 0～100 | 4 | R | 1/8 | ||
SGD 11.50 | 1 Piece(s) | 4 Day(s) or more | 10 | [Fluororubber] FKM | 0～120 | 4 | R | 1/8 | ||
SGD 11.12 | 1 Piece(s) | 4 Day(s) or more | 10 | [H-NBR] HNBR | 0～100 | 4 | R | 1/4 | ||
SGD 7.49 | 10 Piece(s) | 11 Day(s) or more | - | [Fluororubber] FKM | 0～120 | 4 | R | 1/4 | ||
SGD 8.81 | 10 Piece(s) | 11 Day(s) or more | - | [H-NBR] HNBR | 0～100 | 4 | M | M5×0.8 | ||
SGD 7.95 | 10 Piece(s) | 11 Day(s) or more | - | [Fluororubber] FKM | 0～120 | 4 | M | M5×0.8 | ||
SGD 11.12 | 1 Piece(s) | Same day | 10 | [H-NBR] HNBR | 0～100 | 6 | R | 1/8 | ||
SGD 12.27 | 1 Piece(s) | 4 Day(s) or more | 10 | [Fluororubber] FKM | 0～120 | 6 | R | 1/8 | ||
SGD 11.68 | 1 Piece(s) | 4 Day(s) or more | 10 | [H-NBR] HNBR | 0～100 | 6 | R | 1/4 | ||
SGD 12.84 | 1 Piece(s) | 4 Day(s) or more | 10 | [Fluororubber] FKM | 0～120 | 6 | R | 1/4 | ||
SGD 13.91 | 1 Piece(s) | 4 Day(s) or more | - | [H-NBR] HNBR | 0～100 | 6 | R | 3/8 | ||
SGD 8.54 | 10 Piece(s) | 11 Day(s) or more | - | [Fluororubber] FKM | 0～120 | 6 | R | 3/8 | ||
SGD 7.96 | 1 Piece(s) | 7 Day(s) | - | [H-NBR] HNBR | 0～100 | 6 | M | M5×0.8 | ||
SGD 8.41 | 10 Piece(s) | 16 Day(s) or more | - | [Fluororubber] FKM | 0～120 | 6 | M | M5×0.8 | ||
SGD 8.14 | 1 Piece(s) | 7 Day(s) | 10 | [H-NBR] HNBR | 0～100 | 8 | R | 1/8 | ||
SGD 14.14 | 1 Piece(s) | 4 Day(s) or more | 10 | [Fluororubber] FKM | 0～120 | 8 | R | 1/8 | ||
SGD 8.36 | 1 Piece(s) | 7 Day(s) | 10 | [H-NBR] HNBR | 0～100 | 8 | R | 1/4 | ||
SGD 9.25 | 1 Piece(s) | 4 Day(s) or more | 10 | [Fluororubber] FKM | 0～120 | 8 | R | 1/4 | ||
SGD 8.93 | 1 Piece(s) | 7 Day(s) | - | [H-NBR] HNBR | 0～100 | 8 | R | 3/8 | ||
SGD 9.69 | 1 Piece(s) | 4 Day(s) or more | - | [Fluororubber] FKM | 0～120 | 8 | R | 3/8 | ||
SGD 10.49 | 1 Piece(s) | 7 Day(s) | 10 | [H-NBR] HNBR | 0～100 | 10 | R | 1/8 | ||
SGD 18.41 | 1 Piece(s) | 4 Day(s) or more | 10 | [Fluororubber] FKM | 0～120 | 10 | R | 1/8 | ||
SGD 11.10 | 1 Piece(s) | 7 Day(s) | 10 | [H-NBR] HNBR | 0～100 | 10 | R | 1/4 | ||
SGD 18.99 | 1 Piece(s) | 4 Day(s) or more | 10 | [Fluororubber] FKM | 0～120 | 10 | R | 1/4 | ||
SGD 18.51 | 1 Piece(s) | 4 Day(s) or more | - | [H-NBR] HNBR | 0～100 | 10 | R | 3/8 | ||
SGD 19.17 | 1 Piece(s) | 4 Day(s) or more | 10 | [Fluororubber] FKM | 0～120 | 10 | R | 3/8 | ||
SGD 16.07 | 1 Piece(s) | 4 Day(s) or more | 10 | [H-NBR] HNBR | 0～100 | 10 | R | 1/2 | ||
SGD 12.45 | 10 Piece(s) | 11 Day(s) or more | - | [Fluororubber] FKM | 0～120 | 10 | R | 1/2 | ||
SGD 12.88 | 1 Piece(s) | Same day | - | [H-NBR] HNBR | 0～100 | 12 | R | 1/4 | ||
SGD 14.41 | 10 Piece(s) | 11 Day(s) or more | - | [Fluororubber] FKM | 0～120 | 12 | R | 1/4 | ||
SGD 12.46 | 1 Piece(s) | 4 Day(s) or more | 10 | [H-NBR] HNBR | 0～100 | 12 | R | 3/8 | ||
SGD 22.06 | 1 Piece(s) | 4 Day(s) or more | 10 | [Fluororubber] FKM | 0～120 | 12 | R | 3/8 | ||
SGD 22.80 | 1 Piece(s) | 4 Day(s) or more | 10 | [Fluororubber] FKM | 0～120 | 12 | R | 1/2 |
Loading...
Basic Information
| Types | One-Touch Couplings | Fitting Type | Screw Mount Direction | Applicable Fluid | Water / Air |
|---|---|---|---|---|---|
| Body Material | Brass | Application | Static electricity dissipation and anti-static properties / Sputtering Resistance / Heat Resistant | Screw Mounting, Direction | Elbow |
| Elbows | Male Elbows |
Specification/Dimensions
-
Seal Material
- Fluororubber
- H-NBR
- Fluororubber
-
Applicable Tube O.D.1(φ)
-
Connection Screw Type 1
- M
- R
-
Nominal of Thread 1
- 1/2
- 1/4
- 1/8
- 3/8
- M5×0.8
-
type
- KL
Days to Ship
-
- All
- Same day
- 4 Day(s) or Less
- 7 Day(s) or Less
- 11 Day(s) or Less
- 16 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(65) 6733 7211 / FAX：(65) 6733 0211
- 9:00am - 6:00pm (Monday - Friday)
- Technical Inquiry
Payment Method
- Credit Card
- PayPal
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?