(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

For General Piping, Tube Fitting, Bulkhead Union Elbow

For General Piping, Tube Fitting, Bulkhead Union Elbow

Click this image to zoom it.

Move the mouse over the image to zoom

  • For General Piping, Tube Fitting, Bulkhead Union Elbow
  • For General Piping, Tube Fitting, Bulkhead Union Elbow
  • For General Piping, Tube Fitting, Bulkhead Union Elbow
  • For General Piping, Tube Fitting, Bulkhead Union Elbow
  • For General Piping, Tube Fitting, Bulkhead Union Elbow
  • For General Piping, Tube Fitting, Bulkhead Union Elbow
  • For General Piping, Tube Fitting, Bulkhead Union Elbow

Many types of one-touch fittings for standard piping.

[Features]
· One-touch fitting for general pneumatic pipes.
· Can change the take-off angle of the resin body after mounting.
· Diverse lineup.
· Centralized piping is supported

PDF

Japanese Only

Rich Variety

PML appearance

PML appearance

PML dimensional drawing

PML dimensional drawing

Specifications

Usable FluidsAir, water
Maximum Operating Pressure1.0 MPa
Operating Vacuum Pressure-100 kPa
Operating Temperature Range0 to 60°C (no freezing)

Tube Size

Millimeter Size (mm)ø4, ø6, ø8, ø10, ø12, ø16
Inch Sizeø1/8, ø5/32, ø3/16, ø1/4, ø5/16, ø3/8, ø1/2, ø5/8

Thread Size

Metric Male ThreadM5 × 0.8, M6 × 1
Taper Pipe Male ThreadR1/8, R1/4, R3/8, R1/2
Metric Female ThreadM5 × 0.8
Taper Pipe Female ThreadRc1/8, Rc1/4, Rc3/8, Rc1/2
FormatTube Outer Diameter
ød
ME1E2E3AøP1øP2øSTube End
C1
Tube End
C2
Hex
H
GOrifice Diameter
(ømm)
Mass
(g)
PML44M12 × 1.520.232.819.71010101614.914.91452.911
PML66M14 × 1.523.837.822.81312.312.31917171754.617
PML88M16 × 1.525.741.825.713.514.214.22218.118.11965.925
PML1010M20 × 22847.829.516.517.517.527.520.220.72467.142
PML1212M24 × 233.254.732.618.521213123.423.42769.559
PML5/325/32M12 × 1.520.232.819.71010101614.914.91452.911
PML1/41/4M14 × 1.523.837.822.81312.312.51917171754.417
PML5/165/16M16 × 1.525.741.825.713.514.214.52218.118.11965.925
PML3/83/8M20 × 22847.829.516.517.517.527.520.220.72466.942

Unit: mm

After installation, you can change the take-off angle of the resin body.

After installation, you can change the take-off angle of the resin body.

Allows centralized piping. The triple types (PKD, PKG, PKJ) and twin triple types (PKVD, PKVG) enable compact, centralized piping.

Allows centralized piping.
The triple types (PKD, PKG, PKJ) and twin triple types (PKVD, PKVG) enable compact, centralized piping.

We offer a clean washing specification suitable for various particle- and oil-averse production processes. (Optional setting for clean room packaging specification) The product is vacuum sealed after ultrasonic vacuum cleaning with HFE (hydrofluoroether) in a clean room.

We offer a clean washing specification suitable for various particle- and oil-averse production processes. (Optional setting for clean room packaging specification) The product is vacuum sealed after ultrasonic vacuum cleaning with HFE (hydrofluoroether) in a clean room.

High performance and high quality

The lock claw evenly grips the circumference of the tube. Even after many years, tubes still attach and detach like new.
Unique elastic sleeve design shuts out air leaks.

Industry-leading range of variations

A wide assortment of different-diameter sizes is available. One fitting can be used where traditionally two fittings were required.
By reducing the number of fittings used, you can reduce costs and space.

We offer a clean room packaging specification, which is suited to piping in a clean environment. (option)

The product uses fluorochemical grease and is cleaned with clean air before being packaged in a clean room (equivalent to ISO Class 6).

The seal part uses a unique elastic sleeve that shuts out air leaks.

The seal part uses a unique elastic sleeve that shuts out air leaks.

When release ring has been pushed

When release ring has been pushed

Push the release ring to collapse and hide the lock claw

Normal state

Normal state

The lock claw evenly grips the circumference of the tube. Removal and refitting feels almost the same as the first insertion.
When you release your finger from the release ring, the fine ridges of the lock claw come into view

Part Number
PML1/4
PML3/8
PML4
PML4W
PML5/16
PML6
PML6W
PML8
PML8W
PML10
PML10W
PML12
PML12W
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSApplicable Tube O.D.1
(φ)
Release Ring Color Resin Body Color

SGD 7.43

10 Piece(s) 11 Day(s) or more -6.35WhiteBlack

SGD 11.56

10 Piece(s) 10 Day(s) or more -9.53WhiteBlack

SGD 5.88

1 Piece(s) 4 Day(s) or more 104BlackBlack

SGD 6.06

10 Piece(s) 10 Day(s) or more -4Light GrayLight Gray

SGD 8.96

10 Piece(s) 10 Day(s) or more -7.94WhiteBlack

SGD 5.94

1 Piece(s) 7 Day(s) 106BlackBlack

SGD 6.87

10 Piece(s) 10 Day(s) or more -6Light GrayLight Gray

SGD 7.24

1 Piece(s) 7 Day(s) 108BlackBlack

SGD 8.39

10 Piece(s) 9 Day(s) or more -8Light GrayLight Gray

SGD 9.16

1 Piece(s) 7 Day(s) 1010BlackBlack

SGD 10.69

10 Piece(s) 10 Day(s) or more -10Light GrayLight Gray

SGD 11.35

1 Piece(s) 7 Day(s) 1012BlackBlack

SGD 13.86

10 Piece(s) 10 Day(s) or more -12Light GrayLight Gray

Loading...

  1. 1

Basic Information

Types One-Touch Couplings Fitting Type Union with same diameter Applicable Fluid Water / Air
Application Standard/Mini Union, Equal Dia. Partition union elbows Operating Temperature(°C) 0::60
Package Specifications Regular Packaging Specifications

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(65) 6733 7211 / FAX:(65) 6733 0211
9:00am - 6:00pm (Monday - Friday)