(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Clean Key Cutters
- Core Drills (Tip Tools)
- Magnetic Drilling Machine Cutters
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Cardboard
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Tags
- Labelers
- Unpacking Cutters
- Packing Support Equipment
- Cloth Sheets for Packing
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Bicycle Storage Area
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Please be informed that our office is closed during the upcoming Labour Day Holiday in 2024. We would also like to inform you that there may be a potential delay in response/shipment from the supplier due to the Japan Golden Week holiday which falls from 29th April to 6th May 2024. Click here for details.
- Please Note our New Address (effective April 1, 2024): 331 North Bridge Rd, #05-01 Odeon 331, Singapore 188720.
Square Flange Type With Cast Iron Spigot (UCFS310)
[Features]
·The housing is square and bolted to the wall.
[Applications]
·It is used in a wide range of applications because of its simple structure around the bearing and installation.
(i)Caution
- The product images are representative only. Specifications may differ for each part number, including shape and color.
Japanese Only
Part Number
Configured Part Number is shown.
UCFS310
Drawing
UCFS type
Cylindrical bore, set screw type
With a cast iron cover with a rubber seal
With a cast iron closing cover
UKFS type
Taper hole type, adapter type
With a cast iron cover with a rubber seal
With a cast iron closing cover
Product features details
Structure
Refueling type bearing unit
Lubrication-free bearing unit
Bearing shaft fixing method
General conditions of use
Set screw method
Where rotation accuracy is required
Adapter method
Features and benefits
Lubrication-free type
The bearing unit is filled with an appropriate amount of ideal lithium soap-based grease that is ideal for sealed bearings and can withstand long-term use. Since it is equipped with a unique and excellent sealing device, there is almost no leakage of grease or intrusion of dust and moisture from the outside under general usage conditions. In addition, the sealed grease circulates inside as the bearing rotates, and is designed so that it can fully fulfill its lubrication purpose.
Lubrication type
Compared to other companies' systems, this design allows fueling even when the bearing is aligned to 2°(1° for narrow outer ring bearings) for the left or right. A grease fitting hole has been made in the bearing housing, which would normally reduce the strength of the bearing significantly, but after experiments, the housing was set to the location with the least impact. The oil supply groove is also designed with sufficient consideration to prevent deterioration of housing strength and grease hardening. The lubrication-free bearing unit is sufficient for indoor use under general usage conditions.
Excellent sealing device
The ball bearing sealing device for standard bearing units is a combination of a heat-resistant and oil-resistant synthetic rubber seal and a slinger with a unique design.
The bearing unit with cover has a dust-proof cover attached to the outside of the standard type bearing unit, and the bearing unit is designed with special consideration for dust-proof effect so that it can withstand the environmental conditions of various industrial machines such as heavy dust and watery milling, steel making, casting machine, plating, chemical factory or construction machinery used outdoors and transportation machinery by the sealing mechanism of both the bearing and the housing.
Secure mounting
To fix the shaft and bearing, if you tighten the unique ball-filled set screw provided on the inner ring, the set screw will not loosen easily even if it receives vibration or impact due to its excellent thread-locker effect.
Alignment
The outer diameter surface of the ball bearing for the unit used for the bearing unit and the inner diameter surface of the housing to which it is fitted are finished to be spherical so that they can be aligned by proper fitting. Therefore, it is possible to adjust the deviation of the shaft center caused by the shaft work defect, mounting error, etc.
Large rated load
The bearing used for the bearing unit has the same internal structure as the bearing series 62 and 63, and can receive not only radial load but also axial load or a combined load thereof. The rated load of this bearing is considerably larger than that of the self-aligning ball bearing used in the equivalent standard type plummer block.
Light and strong housing
Housings used for bearing units come in a variety of shapes and materials. Both are reasonably designed to be lightweight and maintain maximum strength.
Easy installation
The bearing unit is a combination of a bearing and a housing. In addition, since the bearing is pre-filled with an appropriate amount of lithium soap-based grease, it can be easily attached to the shaft as it is. It can be used immediately after a simple operation inspection after installation.
Housing fixation
When installing the pillow block unit or flange mount unit, a dowel seat is provided on the mounting surface of the housing in order to increase the degree of fixation, so it can be used as needed.
Bearing compatibility
The bearing unit is compatible between the bearing and the housing, and if the bearing becomes unusable due to heat generation, abnormal noise, etc., the housing can be reused simply by replacing the bearing.
| Part Number |
|---|
| UCFS310 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Shaft Bore Dia. d (Ø) | Unit Body Material | Bearing Inner Dia. Shape | Basic Load Rating: Dynamic Load (N) | Basic Load Rating: Static Load (N) | Cover Type | Seal | Lubrication method | Heat Resistant Characteristics | Basic Dynamic Load Rating Cr (N) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
SGD 124.30 | 1 Piece(s) | 4 Day(s) or more | 10 | 50 | [Cast Iron] Cast Iron | Cylindrical Bore Set Screw | 62000 | 38500 | No | No | Oil-Free Type | - | 62000 |
Loading...
Basic Information
| Unit, Type | Bearing unit | Bearing Unit, Type | Square flange shape | Rolling Element Material | Steel |
|---|---|---|---|---|---|
| Surface Treatment | No | Temperature Properties | Standard | Set Screws | Set screw with ball |
Please check the type/dimensions/specifications of the part UCFS310 in the Square Flange Type With Cast Iron Spigot series.
Specification/Dimensions
-
Heat Resistant Characteristics
- Standard
-
type
- C-UCFS
- CM-UCF
- CM-UCFS
- CM-UKFS
- UCFS
- UKFS
-
Shaft Bore Dia. d(Ø)
-
Unit Body Material
- Cast Iron
- Cast Iron
-
Bearing Inner Dia. Shape
- Cylindrical Bore Set Screw
- Tapered hole adapter
-
Cover Type
- Cast iron closing cover
- Cast iron cover with a rubber seal
- Cast iron cover with rubber seals
- Cast iron single closing cover
- No
-
Seal
- No
- Standard nitrile rubber seal
-
Lubrication method
- Oil-Free Type
- Oil Supply Type
-
Basic Dynamic Load Rating Cr(N)
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 4 Day(s) or Less
- 7 Day(s) or Less
- 10 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Similar Part Numbers
| Part Number |
|---|
| C-UCFS316D1 |
| C-UCFS318D1 |
| CM-UCFS306D1 |
| UCFS310D1 |
| UCFS311 |
| UCFS311D1 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Shaft Bore Dia. d (Ø) | Unit Body Material | Bearing Inner Dia. Shape | Basic Load Rating: Dynamic Load (N) | Basic Load Rating: Static Load (N) | Cover Type | Seal | Lubrication method | Heat Resistant Characteristics | Basic Dynamic Load Rating Cr (N) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
SGD 540.60 | 1 Piece(s) | 7 Day(s) or more | 10 | 80 | [Cast Iron] Cast Iron | Cylindrical Bore Set Screw | - | 86500 | Cast iron cover with rubber seals | Standard nitrile rubber seal | Oil Supply Type | - | 123000 | ||
SGD 701.78 | 1 Piece(s) | 10 Day(s) or more | - | 90 | [Cast Iron] Ductile | Cylindrical Bore Set Screw | - | 107,000 | Cast iron cover with a rubber seal | Standard nitrile rubber seal | Oil Supply Type | - | 143000 | ||
SGD 81.88 | 1 Piece(s) | 7 Day(s) or more | 10 | 30 | [Cast Iron] Cast Iron | Cylindrical Bore Set Screw | 26700 | 15000 | Cast iron single closing cover | No | Oil Supply Type | - | 26700 | ||
SGD 167.80 | 1 Piece(s) | 7 Day(s) or more | 10 | 50 | [Cast Iron] Cast Iron | Cylindrical Bore Set Screw | 62000 | 38500 | No | No | Oil Supply Type | - | 62000 | ||
SGD 188.98 | 1 Piece(s) | 7 Day(s) or more | 10 | 55 | [Cast Iron] Cast Iron | Cylindrical Bore Set Screw | - | 45000 | No | Standard nitrile rubber seal | Oil-Free Type | Standard | 71500 | ||
SGD 188.98 | 1 Piece(s) | 10 Day(s) | 10 | 55 | [Cast Iron] Cast Iron | Cylindrical Bore Set Screw | - | 45000 | No | Standard nitrile rubber seal | Oil Supply Type | Standard | 71500 |
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(65) 6733 7211 / FAX：(65) 6733 0211
- 9:00am - 6:00pm (Monday - Friday)
- Technical Inquiry
Payment Method
- Credit Card
- PayPal
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?