(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

Light Coupling E3/E7 Series Socket Bulkhead Straight

Light Coupling E3/E7 Series Socket Bulkhead Straight
  • On Sale Till 31/03/2024

Easily detachable coupling fittings, etc. A Light Coupling E3/E7 Series socket bulkhead straight—manufactured by Nihon Pisco Co., Ltd.
· Material: brass
· Connection type: male-threaded taper pipe
· Type: standard

PDF

Japanese Only

Light Coupling E3/E7 Series Socket, Bulkhead, Straight: Specifications

Light coupling E3/E7 series socket, bulkhead, straight: external appearance

Light coupling E3/E7 series socket, bulkhead, straight: external appearance

Light coupling E3/E7 series socket, bulkhead, straight: dimensional drawing

Light coupling E3/E7 series socket, bulkhead, straight: dimensional drawing

Usable medium: Air, water (conditional *1)
Maximum operating pressure: 0.9 MPa
Usable vacuum pressure: -100 kPa
Operating temperature range: 0 to 60°C (without freezing)

Warning

  • *1 When the specified fluid is water, be sure to comply with the following.
  • When using water, keep the surge pressure below the maximum operating pressure.
  • Normal municipal water can be used. Please inquire about using other water.
  • When using water, be sure to use an insert ring.

Size Table

FormatTube External Diameter
øD
MLABøPTube End
C
Opposite Side
H
GMass
(g)
Effective Sectional Area
(mm2)
CPSE3M-44M9 × 0.58.610.929.69.510.9103103.3
CPSE7M-66M12 × 19.812.432.111.511.7144187.7

Units: mm

  • *Insert the symbol B in the □ at the end of the format for black, and W for light gray.

Applicable Tube Size

Millimeter Size (mm)ø4, ø6, ø8, ø10, ø12
Inch Sizeø1/8, ø5/32, ø1/4, ø5/16, ø3/8, ø1/2

Applicable Screw Size

Meter ScrewM5 × 0.8
Tapered Screws For PipesR1/8, R1/4, R3/8, R1/2

Plug/Socket Installation And Removal

Plug Installation

Plug installation
Light couplings can be installed simply by inserting the plug into the socket, without pressing the open sleeve.
When installing plugs, refer to the individual safety precautions.

Plug removal

Plug removal
Push the socket open sleeve to open the lock ball and remove the plug.
When removing plugs, refer to the individual safety precautions.

Safety precautions

Warning
1. Do not use for purposes other than those defined for the products by series. Please inquire about use of products for other than their specified purposes.

Warning
1. Tighten the partition nuts for partition unions (PM), partition unions P (PMP) and partition union elbows (PML) to within the specified tightening torque range.

Partition nuts torque value

Product NameFitting SizeTightening Torque
Partition Unions (PM)Partition Unions P (PMP), Partition Union Elbows (PML)
Tube Fitting412.0 to 14.0 N⋅m0.4 to 0.6 N⋅m
618.0 to 21.0 N⋅m0.9 to 1.1 N⋅m
818.0 to 21.0 N⋅m1.1 to 1.3 N⋅m
1019.0 to 21.0 N⋅m2.3 to 2.7 N⋅m
1219.0 to 21.0 N⋅m2.7 to 3.3 N⋅m
1642.0 to 54.0 N⋅m-
Tube Fitting Mini32.5 to 3.5 N⋅m-
45.0 to 7.0 N⋅m
612.0 to 14.0 N⋅m

2. Tightening partition nuts may cause deformation to the object being tightened or cause oil to adhere to its surface, which in turn will loosen the partition fixing area.

3. Our air pressure pipe coupling anticipates that tubes installed before use, and thus if air is applied when tubes are not attached to flashings, etc., the elastic sleeves may be ejected outside of the product body.

Please refer to the manufacturer's catalog for safety precautions other than those listed above.

Part Number
CPSE3M-4
CPSE7M-6
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipTube O.D. (mm) D
(mm)
Connection Size (Effective Cross Section)
(mm2)

SGD 14.40

SGD 7.34

1 Piece(s) Same day 43.3

SGD 15.63

1 Piece(s) Same day 67.7

Loading...

  1. 1
 

Basic Information

Type Standard Joint Type With One-Touch Couplings Male/Female Socket (female)
Body Material Brass Seal Material NBR Applicable Fluid Water / Air
Valve Structure Single Passage Opening Closing Type Operating Environment, Applications Standard / Vacuum / Industrial Machinery / Semiconductor Manufacturing Equipment Operating Temperature Range(°C) 0::60
Operating Pressure Range(MPa) 0::0.9

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(65) 6733 7211 / FAX:(65) 6733 0211
9:00am - 6:00pm (Monday - Friday)