Vacuum Pad, Soft Type, VPHD, One-touch Fitting Type
Caution
Product Description
Optimal for removing molded parts and transporting easily scratched workpieces. *CAD data is now being revised for this series. This will be available as soon as modifications are complete.
[Features]
· The pad rubber is flexible enough to adhere plastic molded parts, leaving relatively few traces.
· A wide range of pad sizes, pad materials, and holder shapes are available.
· Downsizes holders (A and B types) for existing vacuum pads, making it possible to save space.
· As with the conventional version, you can change the pad section without removing the holder from the equipment.
· Also compatible with the optional fall prevention valve and pad direct attachment type filter.
· Pad holder (VPHD and VPHE types) with vacuum inlet on both sides
Dimensions
Standard table
| Model code | Pad O.D. ød | Tube O.D. øD | B | L1 | L2 | Tube end C | E | Spring force (N) | Connection config. code |
|---|---|---|---|---|---|---|---|---|---|
| VPHD4-5L[5]-4J[9] | 4 | 4 | 44.7 | 12.2 | 34.4 | 10.9 | 18.5 | 1.6 ~ 2.9 | -T15 |
| VPHD4-5L[5]-6J[9] | 6 | 11.7 | 20.4 | ||||||
| VPHD6-5L[5]-4J[9] | 6 | 4 | 10.9 | 18.5 | |||||
| VPHD6-5L[5]-6J[9] | 6 | 11.7 | 20.4 | ||||||
| VPHD8-5L[5]-4J[9] | 8 | 4 | 10.9 | 18.5 | |||||
| VPHD8-5L[5]-6J[9] | 6 | 11.7 | 20.4 | ||||||
| VPHD10-5L[5]-4J[9] | 10 | 4 | 46.5 | 14 | 36.2 | 10.9 | 18.5 | ||
| VPHD10-5L[5]-6J[9] | 6 | 11.7 | 20.4 | ||||||
| VPHD15-5L[5]-4J[9] | 15 | 4 | 10.9 | 18.5 | |||||
| VPHD15-5L[5]-6J[9] | 6 | 11.7 | 20.4 | ||||||
| VPHD20-5L[5]-4J[9] | 20 | 4 | 47.5 | 15 | 37.2 | 10.9 | 18.5 | -T40 | |
| VPHD20-5L[5]-6J[9] | 6 | 11.7 | 20.4 | ||||||
| VPHD30-5L[5]-4J[9] | 30 | 4 | 10.9 | 18.5 | |||||
| VPHD30-5L[5]-6J[9] | 6 | 11.7 | 20.4 | ||||||
| VPHD40-5L[5]-4J[9] | 40 | 4 | 10.9 | 18.5 | |||||
| VPHD40-5L[5]-6J[9] | 6 | 11.7 | 20.4 |
Units: mm
*[5]: Replaced with Pad rubber material code. Refer to the catalog for details.
*[9]: Replaced with "-S3" for -S3 spec. (Copper alloy free material for metal parts and FKM or HNBR for sealing parts).
*Pad material N and NE are not suitable for use under ozone environment.
*Tightening torque of a pad holder fixing bulkhead nut is 1.8~2.4 N·m.