(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

  • Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 21/4/2024 to 6:00 (SGT) 22/4/2024. We apologize for the inconvenience.
  • Please Note our New Address (effective April 1, 2024): 331 North Bridge Rd, #05-01 Odeon 331, Singapore 188720.

XCP Series Carbide Inner Radius Cutter for High Hardness Steel Machining / 4-Flute / Short Type

XCP Series Carbide Inner Radius Cutter for High Hardness Steel Machining / 4-Flute / Short Type
  • Volume Discount

XCP Series Carbide Inner Radius Cutter for High Hardness Steel Machining / 4-Flute / Short Type

Please see here for cutting conditions.

Technical information

Correct usage of end mill for chamfering and V-groove machining

 

【Questions】

I would like to know the correct usage of the end mill for chamfering and V-groove machining

I often use chamfering and V-grooving end mills for machining parts, but I am troubled by frequent chipping of the blade tip. Please tell me the tips for using the tool.

【Answers】

The followings are important points for chamfering and V-groove machining.

1. Chamfering

・It is necessary to process under the condition settings that consider the maximum depth of cut.
・If the amount of cutting is large, stepwise cutting is recommended.


Chamfering

 


2. V-groove machining

・V-groove machining is mainly considered when using a normal square end mill and when using a dedicated tool.

(1) When using a normal square end mill

It is a method of cutting the V-groove by tilting the tool or workpiece. If high accuracy is not required for the shape of the bottom of the V-groove, machining with a radius or end mill with corner chamfer is also an option.

(2) When using an end mill for V-groove machining

・When using only the tip of the tool, consider the peripheral speed and set a higher rotational speed.
・If the cutting amount is large, stepwise cutting is recommended.

V-groove machining

Recommended Cutting Conditions

●Use a machine and chuck that are rigid and highly accurate.
●Select the cutting oil suitable for the work material.
●If the machining machine you are using does not increase the rotational speed, reduce the feed speed and rotational speed by the same ratio.
●Limit the run-out of the blade tip when installing the end mill to within 0.01 mm.

XCP Series Carbide Inner Radius Cutter for High Hardness Steel Machining / 4-Flute / Short Type:Related images
Part Number
XCP-HCREM0.5
XCP-HCREM1
XCP-HCREM1.5
XCP-HCREM2
XCP-HCREM2.5
XCP-HCREM3
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipR Size (R)
(mm)
Shank Diameter (d) Tip Diameter D Overall Length L

SGD 80.45

1 Piece(s)Available 4 Day(s) or more 0.564.950

SGD 86.34

1 Piece(s)Available 4 Day(s) or more 185.960

SGD 94.88

1 Piece(s)Available 4 Day(s) or more 1.584.960

SGD 98.11

1 Piece(s)Available 4 Day(s) or more 2105.8860

SGD 134.66

1 Piece(s)Available 4 Day(s) or more 2.5104.8860

SGD 133.43

1 Piece(s)Available 4 Day(s) or more 3125.8865

Loading...

  1. 1
 

Basic Information

Application R Chamfer work material General Steel / Heat-Treated Steel / High-Hardness Steel / Stainless Steel / Cast Iron Single blade, two blades Single Blade
Peripheral Blade Y/N None Tool Material Type Carbide Coating Y/N Included
Coating Type AlCrN Diameter Tolerance 0~+0.03 Tolerance of Shank Diameter h6
CAD data availability(2D/3D) 2D/3D

Tech Support