Gauge Steel Pin Gauge Sub Zero Treated

Brand :

MISUMI

Caution

Product Description

Gauge diameter is available in 1/100 increments specified (PING-G), and in 1/1,000 increments specified (PING-GX).

[Specifications]
· Material: Gauge steel (SUJ equivalent).
(SKH equivalent for 0.10 to 0.999 mm)
· Comes in a plastic case (color: gray)

Steel Pin Gauge Subzero Treated:Related Image

Specifications

Model Number		Gauge Diameter D 0.01 mm Increment	Total Length L	Set Range No.
Model Number	No.	Gauge Diameter D 0.01 mm Increment	Total Length L	Set Range No.
PING-G (1/100 Increment Base Specified)	0.1	0.10	40	-
	0.2	0.11 ~0.19		1
	0.3	0.20 ~0.29		2
	0.5	0.30 ~0.49		3
	1	0.50 ~0.99
	1.5	1.00 ~1.49	50
	2	1.50 ~1.99
	2.5	2.00 ~2.49
	3	2.50 ~2.99
	3.5	3.00 ~3.49
	4	3.50 ~3.99
	4.5	4.00 ~4.49
	5	4.50 ~4.99
	5.5	5.00 ~5.49
	6	5.50 ~5.99
	6.5	6.00 ~6.49
	7	6.50 ~6.99
	7.5	7.00 ~7.49
	8	7.50 ~7.99
	8.5	8.00 ~8.49
	9	8.50 ~8.99
	9.5	9.00 ~9.49
	10	9.50 ~ 10.00
	11	10.01 ~ 11.00		4
	12	11.01 ~ 12.00
	13	12.01 ~ 13.00
	14	13.01 ~ 14.00		5
	15	14.01 ~ 15.00		5
	16	15.01 ~ 16.00		6
	17	16.01 ~ 17.00		6
	18	17.01 ~ 18.00		7
	19	18.01 ~ 19.00
	20	19.01 ~ 20.00

[ ! ] No.1.5 ~ 10 have "0" engraved in 1/1000 increment base. If the diameter of No.11 or more needs "0" engraved in 1/1000 increment base, please use the optional additional machining "NP".

Model Number		Gauge Diameter D 0.001 mm Increment	Total Length L	Set Range No.
Model Number	No.	Gauge Diameter D 0.001 mm Increment	Total Length L	Set Range No.
PING-GX (1/1000 Increment Base Specified)	1	0.501 ~0.999	40	8
	1.5	1.001 ~1.499	50	9
	2	1.501 ~1.999
	2.5	2.001 ~2.499
	3	2.501 ~2.999
	3.5	3.001 ~3.499
	4	3.501 ~3.999
	4.5	4.001 ~4.499
	5	4.501 ~4.999
	5.5	5.001 ~5.499
	6	5.501 ~5.999
	6.5	6.001 ~6.499		10
	7	6.501 ~6.999
	7.5	7.001 ~7.499
	8	7.501 ~7.999
	8.5	8.001 ~8.499
	9	8.501 ~8.999
	9.5	9.001 ~9.499
	10	9.501 ~9.999
	11	10.001 ~ 10.999		11
	12	11.001 ~ 11.999
	13	12.001 ~ 12.999
	14	13.001 ~ 13.999		12
	15	14.001 ~ 14.999		12
	16	15.001 ~ 15.999		13
	17	16.001 ~ 16.999		13
	18	17.001 ~ 17.999		14
	19	18.001 ~ 18.999
	20	19.001 ~ 19.999

[ ! ]For sizes using "0" as 1/1000 increment base, please use PING-G
(1/100 Increment Base Specified Type).

Alterations

Applicable Products	Additional Machining Content	Code	Details
PING-G [ ! ]10.01 ≤ D PING-PG PING-MG [ ! ]D ≥ 1.0	Dimension Marking Change	NP	Add "0" to 1/1000 Increment Base ex. 12.00 --> 12.000
PING-G PING-GX PING-PG PING-MG	Inspection Table Attached	CS	An inspection table that describes the measured values in 0.001 mm is attached