Deburring Brush with Grindstone: For Burr Removal on Irregular Surfaces, Shank Included
Brand :
MISUMI
Caution
Product Description
[Features]
·Abrasive stones with special coating works gently and heavy-duty on a workpiece
·The bases of the polishing balls are embedded and fixed in the handle, so it fits perfectly on uneven surfaces
Specifications
| Model Number | Outer Diameter D | Abrasive Grain | Particle Size (#) (selection) | Applicable Hole Diameter (Guideline) | Shank Diameter d | Shank Length s | Polishing Ball Length ℓ | Total Length L | Maximum Operating Rotation Speed (min-1) |
| FLEXH-SH | 5 | AO SC | 60 (Black), 120 (Red), 220 (Yellow) | 5.0 ~ 5.5 | 6 | 150 | 45 | 195 | 1,200 |
| 5.5 | 5.5 ~ 6.0 | ||||||||
| 6.5 | 6.5 ~ 7.0 | ||||||||
| 7 | 7.0 ~ 7.5 | ||||||||
| 9 | 8.0 ~ 9.0 | 50 | 200 | ||||||
| 10 | 9.0 ~ 10.0 | ||||||||
| 11 | 10.0 ~ 11.0 | ||||||||
| 12 | 11.0 ~ 12.0 | 60 | 210 | ||||||
| 13 | 12.0 ~ 13.0 | ||||||||
| 14 | 13.0 ~ 14.0 | ||||||||
| 16 | 14.0 ~ 16.0 | ||||||||
| 18 | 16.0 ~ 18.0 | ||||||||
| 20 | 18.0 ~ 20.0 | ||||||||
| 22 | 20.0 ~ 22.0 | ||||||||
| 25 | 22.0 ~ 24.0 |
[ ! ] The abrasive grain AO is nylon containing aluminum oxide abrasive (= material where aluminum oxide abrasive is mixed into nylon material).
[ ! ] The abrasive grain SC is nylon containing silicon carbide abrasive (= material where silicon carbide abrasive is mixed into nylon material).
Here for a selection guide and deburring brushes
More Information
● A φ6 shank is mounted to a deburring brush with an attached grindstone.
● Each grinding ball, with specially coated grindstones, fits to workpieces. With its ball-shaped grindstone, it contacts workpieces gently but works strongly.
● The center is securely fixed since the grinding ball part shaft is screwed into the handle and it tightly fits to an uneven surface with the flexible tip.
● The abrasive grain SC (silicon carbide) is suitable for grinding hard workpieces such as high-hardness steel, cast iron and carbon steel. The AO (aluminum oxide) is suitable for grinding soft workpieces such as aluminum, stainless steel and copper.
● Surface roughness by particle size after grinding is approximately 18 μm for #60, 12 μm for #120 and 6 μm for #220.