Deburring Brush, Chamfer Combination Type
Brand :
MISUMI
Caution
Product Description
[Application]
·Deburring, trimming, and derusting inside cylinders, blind hole bottoms, and sides
·Chamfering of drilled part
Specification Table
| Model Number | Compatible Hole Diameters | Outer Diameter D | Shaft Diameter t | Wire Material Wire Diameter |
| BHCM-310001 | About 1 mm | 1 | 6 | Triangle Piano Wire 0.7 |
| BHCM-310002 | About 2 mm | 2 | ||
| BHCM-310003 | About 3 mm | 3 | ||
| BHCM-310004 | About 4 mm | 4 | ||
| BHCM-310005 | About 5 mm | 5 | ||
| BHCM-310006 | About 6 mm | 6 | ||
| BHCM-310007 | About 7 mm | 7 | ||
| BHCM-310008 | About 8 mm | 8 | ||
| BHCM-310009 | About 9 mm | 9 | ||
| BHCM-310010 | About 10 mm | 10 | ||
| BHCM-310011 | About 11 mm | 11 | ||
| BHCM-310012 | About 12 mm | 12 | ||
| BHCM-310013 | About 13 mm | 13 | ||
| BHCM-310014 | About 14 mm | 14 | 8 | |
| BHCM-310015 | About 15 mm | 15 | ||
| BHCM-310016 | About 16 mm | 16 |
[!] The applicable hole diameter is an approximate value.
Selection Guide Click here for deburring brushes
Specifications/Overview
■ Applications● It can be used for removing burrs and rust inside cylinders and
on bottom and side surfaces of blind holes.
● Can also be used for chamfering drilled parts.
>> Click here for protective eyewear and dust mask
■ Notes on Usage
● Be sure to use at maximum operating rotation speed of 1,200 min-1 or less.
(It is not recommended for use with an air grinder)