Deburring Brush for Bottom/Side

Specification Table

Model Number	Compatible Hole Diameters	Outer Diameter D	Shaft Diameter t	Wire Material Wire Diameter
BHTM-310103	About 3 mm	3	6	SUS 0.2
BHTM-310104	About 4 mm	4
BHTM-310105	About 5 mm	5
BHTM-310106	About 6 mm	6
BHTM-310107	About 7 mm	7		SUS 0.3
BHTM-310108	About 8 mm	8
BHTM-310109	About 9 mm	9
BHTM-310110	About 10 mm	10	8
BHTM-310111	About 11 mm	11
BHTM-310112	About 12 mm	12	10
BHTM-310113	About 13 mm	13
BHTM-310114	About 14 mm	14
BHTM-310115	About 15 mm	15
BHTM-310116	About 16 mm	16

[!] The applicable hole diameter is an approximate value.

Selection Guide Click here for deburring brushes

 

Specifications/Overview

■ Applications
● It can be used for removing burrs and rust inside cylinders and
on bottom and side surfaces of blind holes.
● Can also be used for chamfering drilled parts.



>> Click here for protective eyewear and dust mask

■ Notes on Usage
● Be sure to use at maximum operating rotation speed of 1,200 min-1 or less.
(It is not recommended for use with an air grinder)