(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

Carbide Straight Edge Taper Radius End Mill, 2-flute

Carbide Straight Edge Taper Radius End Mill, 2-flute

Click this image to zoom it.

Move the mouse over the image to zoom

[Features]
·One-shot finishing of taper corner radius shape
·By specifying alteration, it is possible to select coating suitable for the work material
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Carbide Straight Blade Tapered Radius End Mill, 2 Flute:Related Image
Part Number
BSTRC3-[0.4-2/0.005]-[0-30/1]-[0-59/1]-[0.1-0.9/0.01]-[0.5-8/0.5]-[F,​T]
BSTRC3-[0.4-2/0.005]-[0-30/1]-[0-59/1]-[0.1-0.9/0.01]-[1D,​2D,​3D,​4D,​FD,​MAX]-[F,​T]
BSTRC4-[0.4-3/0.005]-[0-30/1]-[0-59/1]-[0.1-1.4/0.01]-[0.5-12/0.5]-[F,​T]
BSTRC4-[0.4-3/0.005]-[0-30/1]-[0-59/1]-[0.1-1.4/0.01]-[1D,​2D,​3D,​4D,​FD,​MAX]-[F,​T]
BSTRC6-[0.4-5/0.005]-[0-30/1]-[0-59/1]-[0.1-2.4/0.01]-[0.5-20/0.5]-[F,​T]
BSTRC6-[0.4-5/0.005]-[0-30/1]-[0-59/1]-[0.1-2.4/0.01]-[1D,​2D,​3D,​4D,​FD,​MAX]-[F,​T]
BSTRC8-[0.4-7/0.005]-[0-30/1]-[0-59/1]-[0.1-3.4/0.01]-[0.5-28/0.5]-[F,​T]
BSTRC8-[0.4-7/0.005]-[0-30/1]-[0-59/1]-[0.1-3.4/0.01]-[1D,​2D,​3D,​4D,​FD,​MAX]-[F,​T]
BSTRC10-[0.4-9/0.005]-[0-30/1]-[0-59/1]-[0.1-4.4/0.01]-[0.5-35/0.5]-[F,​T]
BSTRC10-[0.4-9/0.005]-[0-30/1]-[0-59/1]-[0.1-4.4/0.01]-[1D,​2D,​3D,​4D,​FD,​MAX]-[F,​T]
BSTRC12-[0.4-11/0.005]-[0-30/1]-[0-59/1]-[0.1-5.4/0.01]-[0.5-36/0.5]-[F,​T]
BSTRC12-[0.4-11/0.005]-[0-30/1]-[0-59/1]-[0.1-5.4/0.01]-[1D,​2D,​3D,​4D,​FD,​MAX]-[F,​T]
BSTRC16-[0.4-15/0.005]-[0-30/1]-[0-59/1]-[0.1-7.4/0.01]-[0.5-48/0.5]-[F,​T]
BSTRC16-[0.4-15/0.005]-[0-30/1]-[0-59/1]-[0.1-7.4/0.01]-[1D,​2D,​3D,​4D,​FD,​MAX]-[F,​T]
LS-BSTRC3-[0.4-2/0.005]-[0-30/1]-[0-59/1]-[0.1-0.9/0.01]-[0.5-8/0.5]-[F,​T]
LS-BSTRC3-[0.4-2/0.005]-[0-30/1]-[0-59/1]-[0.1-0.9/0.01]-MAX-[F,​T]
LS-BSTRC4-[0.4-3/0.005]-[0-30/1]-[0-59/1]-[0.1-1.4/0.01]-[0.5-12/0.5]-[F,​T]
LS-BSTRC4-[0.4-3/0.005]-[0-30/1]-[0-59/1]-[0.1-1.4/0.01]-MAX-[F,​T]
LS-BSTRC6-[0.4-5/0.005]-[0-30/1]-[0-59/1]-[0.1-2.4/0.01]-[0.5-20/0.5]-[F,​T]
LS-BSTRC6-[0.4-5/0.005]-[0-30/1]-[0-59/1]-[0.1-2.4/0.01]-MAX-[F,​T]
LS-BSTRC8-[0.4-7/0.005]-[0-30/1]-[0-59/1]-[0.1-3.4/0.01]-[0.5-28/0.5]-[F,​T]
LS-BSTRC8-[0.4-7/0.005]-[0-30/1]-[0-59/1]-[0.1-3.4/0.01]-MAX-[F,​T]
LS-BSTRC10-[0.4-9/0.005]-[0-30/1]-[0-59/1]-[0.1-4.4/0.01]-[0.5-35/0.5]-[F,​T]
LS-BSTRC10-[0.4-9/0.005]-[0-30/1]-[0-59/1]-[0.1-4.4/0.01]-MAX-[F,​T]
LS-BSTRC12-[0.4-11/0.005]-[0-30/1]-[0-59/1]-[0.1-5.4/0.01]-[0.5-36/0.5]-[F,​T]
LS-BSTRC12-[0.4-11/0.005]-[0-30/1]-[0-59/1]-[0.1-5.4/0.01]-MAX-[F,​T]
LS-STREM3-[0.4-2/0.01]-[0-30/1]-[0-59/1]-[0.1-0.9/0.01]-[0.5-8/0.5]-[F,​T]
LS-STREM3-[0.4-2/0.01]-[0-30/1]-[0-59/1]-[0.1-0.9/0.01]-MAX-[F,​T]
LS-STREM4-[0.4-3/0.01]-[0-30/1]-[0-59/1]-[0.1-1.4/0.01]-[0.5-12/0.5]-[F,​T]
LS-STREM4-[0.4-3/0.01]-[0-30/1]-[0-59/1]-[0.1-1.4/0.01]-MAX-[F,​T]
LS-STREM6-[0.4-5/0.01]-[0-30/1]-[0-59/1]-[0.1-2.4/0.01]-[0.5-20/0.5]-[F,​T]
LS-STREM6-[0.4-5/0.01]-[0-30/1]-[0-59/1]-[0.1-2.4/0.01]-MAX-[F,​T]
LS-STREM8-[0.4-7/0.01]-[0-30/1]-[0-59/1]-[0.1-3.4/0.01]-[0.5-28/0.5]-[F,​T]
LS-STREM8-[0.4-7/0.01]-[0-30/1]-[0-59/1]-[0.1-3.4/0.01]-MAX-[F,​T]
LS-STREM10-[0.4-9/0.01]-[0-30/1]-[0-59/1]-[0.1-4.4/0.01]-[0.5-35/0.5]-[F,​T]
LS-STREM10-[0.4-9/0.01]-[0-30/1]-[0-59/1]-[0.1-4.4/0.01]-MAX-[F,​T]
LS-STREM12-[0.4-11/0.01]-[0-30/1]-[0-59/1]-[0.1-5.4/0.01]-[0.5-36/0.5]-[F,​T]
LS-STREM12-[0.4-11/0.01]-[0-30/1]-[0-59/1]-[0.1-5.4/0.01]-MAX-[F,​T]
STREM3-[0.4-2/0.01]-[0-30/1]-[0-59/1]-[0.1-0.9/0.01]-[0.5-8/0.5]-[F,​T]
STREM3-[0.4-2/0.01]-[0-30/1]-[0-59/1]-[0.1-0.9/0.01]-[1D,​2D,​3D,​4D,​FD,​MAX]-[F,​T]
STREM4-[0.4-3/0.01]-[0-30/1]-[0-59/1]-[0.1-1.4/0.01]-[0.5-12/0.1]-[F,​T]
STREM4-[0.4-3/0.01]-[0-30/1]-[0-59/1]-[0.1-1.4/0.01]-[1D,​2D,​3D,​4D,​FD,​MAX]-[F,​T]
STREM6-[0.4-5/0.01]-[0-30/1]-[0-59/1]-[0.1-2.4/0.01]-[0.5-20/0.5]-[F,​T]
STREM6-[0.4-5/0.01]-[0-30/1]-[0-59/1]-[0.1-2.4/0.01]-[1D,​2D,​3D,​4D,​FD,​MAX]-[F,​T]
STREM8-[0.4-7/0.01]-[0-30/1]-[0-59/1]-[0.1-3.4/0.01]-[0.5-28/0.5]-[F,​T]
STREM8-[0.4-7/0.01]-[0-30/1]-[0-59/1]-[0.1-3.4/0.01]-[1D,​2D,​3D,​4D,​FD,​MAX]-[F,​T]
STREM10-[0.4-9/0.01]-[0-30/1]-[0-59/1]-[0.1-4.4/0.01]-[0.5-35/0.5]-[F,​T]
STREM10-[0.4-9/0.01]-[0-30/1]-[0-59/1]-[0.1-4.4/0.01]-[1D,​2D,​3D,​4D,​FD,​MAX]-[F,​T]
STREM12-[0.4-11/0.01]-[0-30/1]-[0-59/1]-[0.1-5.4/0.01]-[0.5-36/0.5]-[F,​T]
STREM12-[0.4-11/0.01]-[0-30/1]-[0-59/1]-[0.1-5.4/0.01]-[1D,​2D,​3D,​4D,​FD,​MAX]-[F,​T]
STREM16-[0.4-15/0.01]-[0-30/1]-[0-59/1]-[0.1-7.4/0.01]-[0.5-48/0.5]-[F,​T]
STREM16-[0.4-15/0.01]-[0-30/1]-[0-59/1]-[0.1-7.4/0.01]-[1D,​2D,​3D,​4D,​FD,​MAX]-[F,​T]
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipShank Diameter d
(mm)
Overall Length L
(mm)
Processing Applications Single Angle (θ)
(°)
Single Angle (θ)
(′)
1D 2D 3D 4D Additional Machined Flute Length Bottom Blade Shape FD Flute Diameter (D)
(mm)
Flute Length (ℓ)
(mm)
Radius (R)
(mm)
Use

-

1 Piece(s) 6 Day(s) or more 340Boss Hole Drilling0 ~ 300 ~ 59-----F (Flat) / T (Center Dented)-0.4 ~ 20.5 ~ 80.1 ~ 0.9For Boss Hole Drilling

-

1 Piece(s) 6 Day(s) or more 340Boss Hole Drilling0 ~ 300 ~ 591234MaxF (Flat) / T (Center Dented)FD0.4 ~ 2-0.1 ~ 0.9For Boss Hole Drilling

-

1 Piece(s) 6 Day(s) or more 450Boss Hole Drilling0 ~ 300 ~ 59-----F (Flat) / T (Center Dented)-0.4 ~ 30.5 ~ 120.1 ~ 1.4For Boss Hole Drilling

-

1 Piece(s) 6 Day(s) or more 450Boss Hole Drilling0 ~ 300 ~ 591234MaxF (Flat) / T (Center Dented)FD0.4 ~ 3-0.1 ~ 1.4For Boss Hole Drilling

-

1 Piece(s) 6 Day(s) or more 660Boss Hole Drilling0 ~ 300 ~ 59-----F (Flat) / T (Center Dented)-0.4 ~ 50.5 ~ 200.1 ~ 2.4For Boss Hole Drilling

-

1 Piece(s) 6 Day(s) or more 660Boss Hole Drilling0 ~ 300 ~ 591234MaxF (Flat) / T (Center Dented)FD0.4 ~ 5-0.1 ~ 2.4For Boss Hole Drilling

-

1 Piece(s) 6 Day(s) or more 860Boss Hole Drilling0 ~ 300 ~ 59-----F (Flat) / T (Center Dented)-0.4 ~ 70.5 ~ 280.1 ~ 3.4For Boss Hole Drilling

-

1 Piece(s) 6 Day(s) or more 860Boss Hole Drilling0 ~ 300 ~ 591234MaxF (Flat) / T (Center Dented)FD0.4 ~ 7-0.1 ~ 3.4For Boss Hole Drilling

-

1 Piece(s) 6 Day(s) or more 1080Boss Hole Drilling0 ~ 300 ~ 59-----F (Flat) / T (Center Dented)-0.4 ~ 90.5 ~ 350.1 ~ 4.4For Boss Hole Drilling

-

1 Piece(s) 6 Day(s) or more 1080Boss Hole Drilling0 ~ 300 ~ 591234MaxF (Flat) / T (Center Dented)FD0.4 ~ 9-0.1 ~ 4.4For Boss Hole Drilling

-

1 Piece(s) 6 Day(s) or more 1280Boss Hole Drilling0 ~ 300 ~ 59-----F (Flat) / T (Center Dented)-0.4 ~ 110.5 ~ 360.1 ~ 5.4For Boss Hole Drilling

-

1 Piece(s) 6 Day(s) or more 1280Boss Hole Drilling0 ~ 300 ~ 591234MaxF (Flat) / T (Center Dented)FD0.4 ~ 11-0.1 ~ 5.4For Boss Hole Drilling

-

1 Piece(s) 6 Day(s) or more 16100Boss Hole Drilling0 ~ 300 ~ 59-----F (Flat) / T (Center Dented)-0.4 ~ 150.5 ~ 480.1 ~ 7.4For Boss Hole Drilling

-

1 Piece(s) 6 Day(s) or more 16100Boss Hole Drilling0 ~ 300 ~ 591234MaxF (Flat) / T (Center Dented)FD0.4 ~ 15-0.1 ~ 7.4For Boss Hole Drilling

-

1 Piece(s) 6 Day(s) or more 360Boss Hole Drilling0 ~ 300 ~ 59-----F (Flat) / T (Center Dented)-0.4 ~ 20.5 ~ 80.1 ~ 0.9For Boss Hole Drilling

-

1 Piece(s) 6 Day(s) or more 360Boss Hole Drilling0 ~ 300 ~ 59----MaxF (Flat) / T (Center Dented)-0.4 ~ 2-0.1 ~ 0.9For Boss Hole Drilling

-

1 Piece(s) 6 Day(s) or more 480Boss Hole Drilling0 ~ 300 ~ 59-----F (Flat) / T (Center Dented)-0.4 ~ 30.5 ~ 120.1 ~ 1.4For Boss Hole Drilling

-

1 Piece(s) 6 Day(s) or more 480Boss Hole Drilling0 ~ 300 ~ 59----MaxF (Flat) / T (Center Dented)-0.4 ~ 3-0.1 ~ 1.4For Boss Hole Drilling

-

1 Piece(s) 6 Day(s) or more 690Boss Hole Drilling0 ~ 300 ~ 59-----F (Flat) / T (Center Dented)-0.4 ~ 50.5 ~ 200.1 ~ 2.4For Boss Hole Drilling

-

1 Piece(s) 6 Day(s) or more 690Boss Hole Drilling0 ~ 300 ~ 59----MaxF (Flat) / T (Center Dented)-0.4 ~ 5-0.1 ~ 2.4For Boss Hole Drilling

-

1 Piece(s) 6 Day(s) or more 890Boss Hole Drilling0 ~ 300 ~ 59-----F (Flat) / T (Center Dented)-0.4 ~ 70.5 ~ 280.1 ~ 3.4For Boss Hole Drilling

-

1 Piece(s) 6 Day(s) or more 890Boss Hole Drilling0 ~ 300 ~ 59----MaxF (Flat) / T (Center Dented)-0.4 ~ 7-0.1 ~ 3.4For Boss Hole Drilling

-

1 Piece(s) 6 Day(s) or more 10120Boss Hole Drilling0 ~ 300 ~ 59-----F (Flat) / T (Center Dented)-0.4 ~ 90.5 ~ 350.1 ~ 4.4For Boss Hole Drilling

-

1 Piece(s) 6 Day(s) or more 10120Boss Hole Drilling0 ~ 300 ~ 59----MaxF (Flat) / T (Center Dented)-0.4 ~ 9-0.1 ~ 4.4For Boss Hole Drilling

-

1 Piece(s) 6 Day(s) or more 12120Boss Hole Drilling0 ~ 300 ~ 59-----F (Flat) / T (Center Dented)-0.4 ~ 110.5 ~ 360.1 ~ 5.4For Boss Hole Drilling

-

1 Piece(s) 6 Day(s) or more 12120Boss Hole Drilling0 ~ 300 ~ 59----MaxF (Flat) / T (Center Dented)-0.4 ~ 11-0.1 ~ 5.4For Boss Hole Drilling

-

1 Piece(s) 6 Day(s) or more 360Flank / Groove Processing0 ~ 300 ~ 59-----F (Flat) / T (Center Dented)-0.4 ~ 20.5 ~ 80.1 ~ 0.9For Radial Groove Milling

-

1 Piece(s) 6 Day(s) or more 360Flank / Groove Processing0 ~ 300 ~ 59----MaxF (Flat) / T (Center Dented)-0.4 ~ 2-0.1 ~ 0.9For Radial Groove Milling

-

1 Piece(s) 6 Day(s) or more 480Flank / Groove Processing0 ~ 300 ~ 59-----F (Flat) / T (Center Dented)-0.4 ~ 30.5 ~ 120.1 ~ 1.4For Radial Groove Milling

-

1 Piece(s) 6 Day(s) or more 480Flank / Groove Processing0 ~ 300 ~ 59----MaxF (Flat) / T (Center Dented)-0.4 ~ 3-0.1 ~ 1.4For Radial Groove Milling

-

1 Piece(s) 6 Day(s) or more 690Flank / Groove Processing0 ~ 300 ~ 59-----F (Flat) / T (Center Dented)-0.4 ~ 50.5 ~ 200.1 ~ 2.4For Radial Groove Milling

-

1 Piece(s) 6 Day(s) or more 690Flank / Groove Processing0 ~ 300 ~ 59----MaxF (Flat) / T (Center Dented)-0.4 ~ 5-0.1 ~ 2.4For Radial Groove Milling

-

1 Piece(s) 6 Day(s) or more 890Flank / Groove Processing0 ~ 300 ~ 59-----F (Flat) / T (Center Dented)-0.4 ~ 70.5 ~ 280.1 ~ 3.4For Radial Groove Milling

-

1 Piece(s) 6 Day(s) or more 890Flank / Groove Processing0 ~ 300 ~ 59----MaxF (Flat) / T (Center Dented)-0.4 ~ 7-0.1 ~ 3.4For Radial Groove Milling

-

1 Piece(s) 6 Day(s) or more 10120Flank / Groove Processing0 ~ 300 ~ 59-----F (Flat) / T (Center Dented)-0.4 ~ 90.5 ~ 350.1 ~ 4.4For Radial Groove Milling

-

1 Piece(s) 6 Day(s) or more 10120Flank / Groove Processing0 ~ 300 ~ 59----MaxF (Flat) / T (Center Dented)-0.4 ~ 9-0.1 ~ 4.4For Radial Groove Milling

-

1 Piece(s) 6 Day(s) or more 12120Flank / Groove Processing0 ~ 300 ~ 59-----F (Flat) / T (Center Dented)-0.4 ~ 110.5 ~ 360.1 ~ 5.4For Radial Groove Milling

-

1 Piece(s) 6 Day(s) or more 12120Flank / Groove Processing0 ~ 300 ~ 59----MaxF (Flat) / T (Center Dented)-0.4 ~ 11-0.1 ~ 5.4For Radial Groove Milling

-

1 Piece(s) 6 Day(s) or more 340Flank / Groove Processing0 ~ 300 ~ 59-----F (Flat) / T (Center Dented)-0.4 ~ 20.5 ~ 80.1 ~ 0.9For Radial Groove Milling

-

1 Piece(s) 6 Day(s) or more 340Flank / Groove Processing0 ~ 300 ~ 591234MaxF (Flat) / T (Center Dented)FD0.4 ~ 2-0.1 ~ 0.9For Radial Groove Milling

-

1 Piece(s) 6 Day(s) or more 450Flank / Groove Processing0 ~ 300 ~ 59-----F (Flat) / T (Center Dented)-0.4 ~ 30.5 ~ 120.1 ~ 1.4For Radial Groove Milling

-

1 Piece(s) 6 Day(s) or more 450Flank / Groove Processing0 ~ 300 ~ 591234MaxF (Flat) / T (Center Dented)FD0.4 ~ 3-0.1 ~ 1.4For Radial Groove Milling

-

1 Piece(s) 6 Day(s) or more 660Flank / Groove Processing0 ~ 300 ~ 59-----F (Flat) / T (Center Dented)-0.4 ~ 50.5 ~ 200.1 ~ 2.4For Radial Groove Milling

-

1 Piece(s) 6 Day(s) or more 660Flank / Groove Processing0 ~ 300 ~ 591234MaxF (Flat) / T (Center Dented)FD0.4 ~ 5-0.1 ~ 2.4For Radial Groove Milling

-

1 Piece(s) 6 Day(s) or more 860Flank / Groove Processing0 ~ 300 ~ 59-----F (Flat) / T (Center Dented)-0.4 ~ 70.5 ~ 280.1 ~ 3.4For Radial Groove Milling

-

1 Piece(s) 6 Day(s) or more 860Flank / Groove Processing0 ~ 300 ~ 591234MaxF (Flat) / T (Center Dented)FD0.4 ~ 7-0.1 ~ 3.4For Radial Groove Milling

-

1 Piece(s) 6 Day(s) or more 1080Flank / Groove Processing0 ~ 300 ~ 59-----F (Flat) / T (Center Dented)-0.4 ~ 90.5 ~ 350.1 ~ 4.4For Radial Groove Milling

-

1 Piece(s) 6 Day(s) or more 1080Flank / Groove Processing0 ~ 300 ~ 591234MaxF (Flat) / T (Center Dented)FD0.4 ~ 9-0.1 ~ 4.4For Radial Groove Milling

-

1 Piece(s) 6 Day(s) or more 1280Flank / Groove Processing0 ~ 300 ~ 59-----F (Flat) / T (Center Dented)-0.4 ~ 110.5 ~ 360.1 ~ 5.4For Radial Groove Milling

-

1 Piece(s) 6 Day(s) or more 1280Flank / Groove Processing0 ~ 300 ~ 591234MaxF (Flat) / T (Center Dented)FD0.4 ~ 11-0.1 ~ 5.4For Radial Groove Milling

-

1 Piece(s) 6 Day(s) or more 16100Flank / Groove Processing0 ~ 300 ~ 59-----F (Flat) / T (Center Dented)-0.4 ~ 150.5 ~ 480.1 ~ 7.4For Radial Groove Milling

-

1 Piece(s) 6 Day(s) or more 16100Flank / Groove Processing0 ~ 300 ~ 591234MaxF (Flat) / T (Center Dented)FD0.4 ~ 15-0.1 ~ 7.4For Radial Groove Milling

Loading...

  1. 1

Specifications

Carbide Straight Blade Tapered Radius End Mill, 2 Flute:Related Image

[ ! ]Even if dimensions within the specifiable range are specified, depending on the combination of each dimension some products may be unable to be manufactured.

Model Number Flute Diameter
D
0.005 mm
Increment
Designation
Single Angle
θ
° - '
1' Increment Designation
Radius
R
0.01 mm
Increment
Designation
Flute Length *
0.5 mm
Increment Designation
Bottom Blade
Shape
(Selection)
Overall Length
L
Shank Diameter
d
Specified Rangeℓ max.BSTRCLS-BSTRC
BSTRC

LS-BSTRC
(Long Shank)
30.400 ~2.0000°15' ~ 30°0'0.10 ≤ R ≤ (D - 0.2) / 2(1)0.5 ≤ ≤ D x 4
and
(2) max.
(refer to table on right)
and
Carbide Straight Blade Tapered Radius End Mill, 2 Flute:Related Image
8.0T
(Dished)

F
(Flat)
Bottom Blade Shape
>>P.608
4060
40.400 ~3.00012.05080
60.400 ~5.00020.06090
80.400 ~7.00028.06090
100.400 ~9.00035.080120
120.400 ~ 11.00036.080120
160.400 ~ 15.00048.0100-

 

Model Number Flute Diameter
D
0.01 mm
Increment
Designation
Single Angle
θ
° - '
1' Increment Designation
Radius
R
0.01 mm
Increment
Designation
Flute Length *
0.5 mm
Increment Designation
Bottom Blade
Shape
(Selection)
Overall Length
L
Shank Diameter
d
Specified Rangeℓ max.STREMLS-STREM
STREM

LS-STREM
(Long Shank)
30.40 ~2.000°15' ~ 30°0'0.10 ≤ R ≤ (D - 0.2) / 2(1)0.5 ≤ ≤ D x 4
and
(2) max.
(refer to table on right)
and
Carbide Straight Blade Tapered Radius End Mill, 2 Flute:Related Image
8.0T
(Dished)

F
(Flat)
Bottom Blade Shape
>>P.608
4060
40.40 ~3.0012.05080
60.40 ~5.0020.06090
80.40 ~7.0028.06090
100.40 ~9.0035.080120
120.40 ~ 11.0036.080120
160.40 ~ 15.0048.0100-

* Specify to meet all of conditions (1), (2), (3).
* Depending on the size of
, the entire gradient angle may be blade length.

Alterations

Carbide Straight Blade Tapered Radius End Mill, 2 Flute:Related Image
Carbide Straight Blade Tapered Radius End Mill, 2 Flute:Related Image
Carbide Straight Blade Tapered Radius End Mill, 2 Flute:Related Image

Basic Information

Material Ultrafine Particulate Carbide

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(65) 6733 7211 / FAX:(65) 6733 0211
9:00am - 6:00pm (Monday - Friday)