(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

  • Please Note our New Address (effective April 1, 2024): 331 North Bridge Rd, #05-01 Odeon 331, Singapore 188720.

TS coated carbide roughing end mill, 45°spiral, fine pitch / long shank, regular model

TS coated carbide roughing end mill, 45°spiral, fine pitch / long shank, regular model

Click this image to zoom it.

Move the mouse over the image to zoom

  • Volume Discount

[Features]
·High-speed rotation processing is possible by adopting 45° helix angle
·Roughing end mill capable of coarse and middle to coarse machining with fine pitch nick
·Long shank type ideal for deep cavity milling
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

  • TS
  • General Steel
  • R (Regular)

PDF

TS coated carbide roughing end mill, 45°spiral, fine pitch / long shank, regular model:Related Image

Part Number
SN-TSC-LS-HRFPR6-[20-65/1]-15
TSC-LS-HRFPR6
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipOuter Diameter (D)
(φ)
Flute Length (ℓ)
(mm)
Number of Flutes
(sheet)
Shank Diameter (d)
(mm)
Overall Length (L)
(mm)
Length Under Neck (ℓ1)
(mm)
Processing Applications Additional Classification Figure ● Inventory Product □ Manufacturer Product

-

1 Piece(s) 6 Day(s) or more 6153610020 ~ 65Flat Surface / Side Surface / Groove / Inclined CuttingStandard Neck Relief1

SGD 121.47

1 Piece(s)Available 4 Day(s) or more 61536100-Flat Surface / Side Surface / Groove / Inclined CuttingStocked Product1

Loading...

  1. 1

Specifications

TS coated carbide roughing end mill, 45°spiral, fine pitch / long shank, regular model:Related Image
 

Model Number     Shank Diameter
d
Flute Length
Overall Length
L
Number of Flutes Figure
Outer Diameter
D
Shank Diameter
d
TSC-LS-HRFPR 6 6 15 100 3 1
8 6 6 20 100 4 2
8 8 20 100 4 1
10 8 8 25 100 4 2
10 10 25 100 4 1
12 10 10 30 120 4 2
12 12 30 120 4 1
14 12 35 120 4 2
16 16 40 120 4 1
18 16 45 125 4 2
20 20 45 150 4 1

[ ! ]For shank diameter (d) specifications listed in blue, specify both a outer diameter (D) and shank diameter (d).

For Cutting Conditions, Refer to >>Click here.

More Information


It has a new TS film coating with much greater oxidation resistance and hardness than conventional films, yielding a longer operational life and is ideal for high speed machining / dry machining.
Adopts a 45° twisted structure that allows for high speed rotation.
Adopts a fine pitch nick that delivers a finish with good surface roughness after machining.
The long shank models are ideal for machining deep grooves.

Basic Information

Work Material General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Aluminum Alloy / Copper Alloy Model Roughing Coating For High Hardness (Silicone-Based)
Geometry C Surface Torsion Angle (θ) Powerful Helix (45° to 60°) Tolerance of OD(mm) ±0.06

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(65) 6733 7211 / FAX:(65) 6733 0211
9:00am - 6:00pm (Monday - Friday)