(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

Pressure Welding Angle Model

Pressure Welding Angle Model

Click this image to zoom it.

Move the mouse over the image to zoom

A series in which MIL angle drawers can be selected. The angle shape makes wiring easy even in tight spaces. Widely used for programmable controllers (PLC) and I/O cards. Printing on wire marker sleeve complies with the signal name of the corresponding device. (Only when machining discrete wire on one end)
[Features]
·connector: Misumi MIL IDC connector / Hirose Electric MIL IDC connector
·Cable: Double-shielded, thin flexible, oil-resistant, and a wide variety of cable types (4 types) to choose from. cable is twisted pair
·Overall Length: The length can be specified in 0.1 m increments from a minimum of 0.2 m to a maximum of 50 m. 0.5 to 5 m only for EE type
·Free combination with connectors on both ends, cut off on one side, Y terminal on one side, etc.
·A wide range of selections for the number of contacts (MIL connector female: 6, 10, 14, 16, 20, 26, 30, 34, 40, 50, 60, 64, 50W, 60W, 64W/MIL connector male: 10, 16, 20, 26, 30, 34 , 40, 50, 60, 64, 50W, 60W, 64W)

  • Space-saving
  • PLC
  • Gold Plated
  • Small Diameter

● Angle shape is used for easy maneuvering in narrow areas.
● Wiring is easy thanks to cables with diameter thinness 35% that of conventional cables.


· Removal of CN1 is the opposite direction to the guide key.
· When the mark tube has no printed custom number specified, the connector pin arrangement number is printed. Be careful not to forget to put the custom number on the supported device.
· Sheath peeling length can be designated as alteration service only for those with terminals or mark tubes.
· For SB models, the exposed core parts have been fused together for protection.

Wiring and Wire Color Page >>Click here.
Component Page >>Click here.

PDF

Specifications

Pressure Welding Angle Model:Related Image
 
Specified Length (m)~ 0.91 ~ 44.1 ~ 50
Tolerance+20mm+50mm+ 3% of Specified Length

* The tolerance of the specified length is as described above.

Pressure Welding Angle Model:Related Image


Pressure Welding Angle Model:Related Image

Pressure Welding Angle Model:Related Image

Pressure Welding Angle Model:Related Image

Part Number
HIFS-SA-E-6-[0.2-50/0.1]
HIFS-SA-E-10-[0.2-50/0.1]
HIFS-SA-E-14-[0.2-50/0.1]
HIFS-SA-E-16-[0.2-50/0.1]
HIFS-SA-E-20-[0.2-50/0.1]
HIFS-SA-E-26-[0.2-50/0.1]
HIFS-SA-E-30-[0.2-50/0.1]
HIFS-SA-E-34-[0.2-50/0.1]
HIFS-SA-E-40-[0.2-50/0.1]
HIFS-SA-E-50-[0.2-50/0.1]
HIFS-SA-E-50W-[0.2-50/0.1]
HIFS-SA-E-60-[0.2-50/0.1]
HIFS-SA-E-60W-[0.2-50/0.1]
HIFS-SA-E-64-[0.2-50/0.1]
HIFS-SA-E-64W-[0.2-50/0.1]
HIFS-SAP-E-10-[0.2-50/0.1]
HIFS-SAP-E-16-[0.2-50/0.1]
HIFS-SAP-E-20-[0.2-50/0.1]
HIFS-SAP-E-26-[0.2-50/0.1]
HIFS-SAP-E-30-[0.2-50/0.1]
HIFS-SAP-E-34-[0.2-50/0.1]
HIFS-SAP-E-40-[0.2-50/0.1]
HIFS-SAP-E-50-[0.2-50/0.1]
HIFS-SAP-E-50W-[0.2-50/0.1]
HIFS-SAP-E-60-[0.2-50/0.1]
HIFS-SAP-E-60W-[0.2-50/0.1]
HIFS-SAP-E-64-[0.2-50/0.1]
HIFS-SAP-E-64W-[0.2-50/0.1]
HIFS-SAS-E-6-[0.2-50/0.1]
HIFS-SAS-E-10-[0.2-50/0.1]
HIFS-SAS-E-14-[0.2-50/0.1]
HIFS-SAS-E-16-[0.2-50/0.1]
HIFS-SAS-E-20-[0.2-50/0.1]
HIFS-SAS-E-26-[0.2-50/0.1]
HIFS-SAS-E-30-[0.2-50/0.1]
HIFS-SAS-E-34-[0.2-50/0.1]
HIFS-SAS-E-40-[0.2-50/0.1]
HIFS-SAS-E-50-[0.2-50/0.1]
HIFS-SAS-E-50W-[0.2-50/0.1]
HIFS-SAS-E-60-[0.2-50/0.1]
HIFS-SAS-E-60W-[0.2-50/0.1]
HIFS-SAS-E-64-[0.2-50/0.1]
HIFS-SAS-E-64W-[0.2-50/0.1]
HIFS-SAT-E-6-[0.2-50/0.1]
HIFS-SAT-E-10-[0.2-50/0.1]
HIFS-SAT-E-14-[0.2-50/0.1]
HIFS-SAT-E-16-[0.2-50/0.1]
HIFS-SAT-E-20-[0.2-50/0.1]
HIFS-SAT-E-26-[0.2-50/0.1]
HIFS-SAT-E-30-[0.2-50/0.1]
HIFS-SAT-E-34-[0.2-50/0.1]
HIFS-SAT-E-40-[0.2-50/0.1]
HIFS-SAT-E-50-[0.2-50/0.1]
HIFS-SAT-E-50W-[0.2-50/0.1]
HIFS-SAT-E-60-[0.2-50/0.1]
HIFS-SAT-E-60W-[0.2-50/0.1]
HIFS-SAT-E-64-[0.2-50/0.1]
HIFS-SAT-E-64W-[0.2-50/0.1]
HIFS-SAY-E-6-[0.2-50/0.1]
HIFS-SAY-E-10-[0.2-50/0.1]
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipCN2 Number Of Cores Cable wiring direction (CN1 connector) Specified Length
(m)

-

1 Piece(s) 10 Day(s) or more Cut off6Left Side0.2 ~ 50

-

1 Piece(s) 10 Day(s) or more Cut off10Left Side0.2 ~ 50

-

1 Piece(s) 10 Day(s) or more Cut off14Left Side0.2 ~ 50

-

1 Piece(s) 10 Day(s) or more Cut off16Left Side0.2 ~ 50

-

1 Piece(s) 10 Day(s) or more Cut off20Left Side0.2 ~ 50

-

1 Piece(s) 10 Day(s) or more Cut off26Left Side0.2 ~ 50

-

1 Piece(s) 10 Day(s) or more Cut off30Left Side0.2 ~ 50

-

1 Piece(s) 10 Day(s) or more Cut off34Left Side0.2 ~ 50

-

1 Piece(s) 10 Day(s) or more Cut off40Left Side0.2 ~ 50

-

1 Piece(s) 10 Day(s) or more Cut off50Left Side0.2 ~ 50

-

1 Piece(s) 10 Day(s) or more Cut off50WLeft Side0.2 ~ 50

-

1 Piece(s) 10 Day(s) or more Cut off60Left Side0.2 ~ 50

-

1 Piece(s) 10 Day(s) or more Cut off60WLeft Side0.2 ~ 50

-

1 Piece(s) 10 Day(s) or more Cut off64Left Side0.2 ~ 50

-

1 Piece(s) 10 Day(s) or more Cut off64WLeft Side0.2 ~ 50

-

1 Piece(s) 10 Day(s) or more Male10Left Side0.2 ~ 50

-

1 Piece(s) 10 Day(s) or more Male16Left Side0.2 ~ 50

-

1 Piece(s) 10 Day(s) or more Male20Left Side0.2 ~ 50

-

1 Piece(s) 10 Day(s) or more Male26Left Side0.2 ~ 50

-

1 Piece(s) 10 Day(s) or more Male30Left Side0.2 ~ 50

-

1 Piece(s) 10 Day(s) or more Male34Left Side0.2 ~ 50

-

1 Piece(s) 10 Day(s) or more Male40Left Side0.2 ~ 50

-

1 Piece(s) 10 Day(s) or more Male50Left Side0.2 ~ 50

-

1 Piece(s) 10 Day(s) or more Male50WLeft Side0.2 ~ 50

-

1 Piece(s) 10 Day(s) or more Male60Left Side0.2 ~ 50

-

1 Piece(s) 10 Day(s) or more Male60WLeft Side0.2 ~ 50

-

1 Piece(s) 10 Day(s) or more Male64Left Side0.2 ~ 50

-

1 Piece(s) 10 Day(s) or more Male64WLeft Side0.2 ~ 50

-

1 Piece(s) 10 Day(s) or more Female6Left Side0.2 ~ 50

-

1 Piece(s) 10 Day(s) or more Female10Left Side0.2 ~ 50

-

1 Piece(s) 10 Day(s) or more Female14Left Side0.2 ~ 50

-

1 Piece(s) 10 Day(s) or more Female16Left Side0.2 ~ 50

-

1 Piece(s) 10 Day(s) or more Female20Left Side0.2 ~ 50

-

1 Piece(s) 10 Day(s) or more Female26Left Side0.2 ~ 50

-

1 Piece(s) 10 Day(s) or more Female30Left Side0.2 ~ 50

-

1 Piece(s) 10 Day(s) or more Female34Left Side0.2 ~ 50

-

1 Piece(s) 10 Day(s) or more Female40Left Side0.2 ~ 50

-

1 Piece(s) 10 Day(s) or more Female50Left Side0.2 ~ 50

-

1 Piece(s) 10 Day(s) or more Female50WLeft Side0.2 ~ 50

-

1 Piece(s) 10 Day(s) or more Female60Left Side0.2 ~ 50

-

1 Piece(s) 10 Day(s) or more Female60WLeft Side0.2 ~ 50

-

1 Piece(s) 10 Day(s) or more Female64Left Side0.2 ~ 50

-

1 Piece(s) 10 Day(s) or more Female64WLeft Side0.2 ~ 50

-

1 Piece(s) 10 Day(s) or more Discrete wire6Left Side0.2 ~ 50

-

1 Piece(s) 10 Day(s) or more Discrete wire10Left Side0.2 ~ 50

-

1 Piece(s) 10 Day(s) or more Discrete wire14Left Side0.2 ~ 50

-

1 Piece(s) 10 Day(s) or more Discrete wire16Left Side0.2 ~ 50

-

1 Piece(s) 10 Day(s) or more Discrete wire20Left Side0.2 ~ 50

-

1 Piece(s) 10 Day(s) or more Discrete wire26Left Side0.2 ~ 50

-

1 Piece(s) 10 Day(s) or more Discrete wire30Left Side0.2 ~ 50

-

1 Piece(s) 10 Day(s) or more Discrete wire34Left Side0.2 ~ 50

-

1 Piece(s) 10 Day(s) or more Discrete wire40Left Side0.2 ~ 50

-

1 Piece(s) 10 Day(s) or more Discrete wire50Left Side0.2 ~ 50

-

1 Piece(s) 10 Day(s) or more Discrete wire50WLeft Side0.2 ~ 50

-

1 Piece(s) 10 Day(s) or more Discrete wire60Left Side0.2 ~ 50

-

1 Piece(s) 10 Day(s) or more Discrete wire60WLeft Side0.2 ~ 50

-

1 Piece(s) 10 Day(s) or more Discrete wire64Left Side0.2 ~ 50

-

1 Piece(s) 10 Day(s) or more Discrete wire64WLeft Side0.2 ~ 50

-

1 Piece(s) 10 Day(s) or more Y terminal6Left Side0.2 ~ 50

-

1 Piece(s) 10 Day(s) or more Y terminal10Left Side0.2 ~ 50

Loading...

Basic Information

Connector type MIL Connector manufacturer Hirose Electric Group Connector Shape Angle
Machining Method Pressure welding Cable shape Circular Hood None
CN1 Female Cable rated voltage(V) 300 Shield 1 Layer
Cable standard (UL/CSA) UL Cable color Navy Twisted pair Included
AWG 28 Environment resistant N/A Bend tolerant N/A
Cable type E Special notes Please see the catalog for more information on mating surface and wiring direction.

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(65) 6733 7211 / FAX:(65) 6733 0211
9:00am - 6:00pm (Monday - Friday)