(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

HR10 Relay Adapter (One-touch Lock)

HR10 Relay Adapter (One-touch Lock)

Click this image to zoom it.

Move the mouse over the image to zoom

  • HR10 Relay Adapter (One-touch Lock)
  • HR10 Relay Adapter (One-touch Lock)
  • Volume Discount

[Features]This is a single-action lock inline adapter manufactured by Hirose Electric. A connector with a simple and smart design. Connects to a straight plug. Single-action attachment/removal by simply pinching the outer ring of the straight plug and pulling it. [Applications]A connector that can be used for camera harnesses.

  • For Signal
  • Sensor
  • Solder
  • Nickel-Plated
  • One-Touch Lock

● It connects to straight plugs.
● One touch attachment/detachment by simply holding the straight plug's outer ring and pulling.  



· Relay adapters cannot be fitted with one another.

PDF

Japanese Only

Specifications

HR10 Relay Adapter (One-touch Lock):Related Image

ModelNumber of CoresTypeWeight
g
HR10A-7J-4P734Male
(Pin)
5.8
HR10A-7J-6P7366.8
HR10A-10J-10P731013.8
HR10A-10J-12P731213.8
HR10A-7J-4S734Female
(Socket)
6.8
HR10A-7J-6S7366.9
HR10A-10J-10S731013.8
HR10A-10J-12S731213.9

More Information

HR10 Relay Adapter (One-touch Lock):Related Image
Part Number
HR10A-7J-4P73
HR10A-7J-4S73
HR10A-7J-6P73
HR10A-7J-6S73
HR10A-10J-10P73
HR10A-10J-10S73
HR10A-10J-12P73
HR10A-10J-12S73
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSApplicable pin/contact Number Of Pins

SGD 18.19

1 Piece(s)Available 4 Day(s) or more 10Male (plug)4

SGD 12.97

1 Piece(s)Available 4 Day(s) or more 10Female (socket)4

SGD 19.75

1 Piece(s)Available 4 Day(s) or more 10Male (plug)6

SGD 17.87

1 Piece(s)Available 4 Day(s) or more 10Female (socket)6

SGD 23.14

1 Piece(s)Available 4 Day(s) or more 10Male (plug)10

SGD 17.20

1 Piece(s)Available 4 Day(s) or more 10Female (socket)10

SGD 20.34

1 Piece(s)Available 4 Day(s) or more 10Male (plug)12

SGD 25.70

1 Piece(s)Available 4 Day(s) or more 10Female (socket)12

Loading...

  1. 1

Characteristics

Item Contents
Rated Current 2 A or lower
Rated Voltage 14-core: 150 VAC / 200 VDC, Other: 100 VAC / 140 VDC
Withstand Voltage 300 VAC or less (500 VAC or less for 4-core) / 1 minute
Insulation Resistance 1,000 MΩ or more / 100 VDC
Contact Resistance 10 mΩ or less / 1 ADC
Compatible Wire Size AWG26 or below Loose Wires or 0.15 mm2 or less Loose Wires

* For applicable wire size, cable finished outer diameter should be within cable clamp inner diameter.

Material / Finish

Item Materials Finish
Body Shell Zinc Alloy Satin Nickel Plated
Pin Contact Brass Silver Plating
Socket Contact Phosphor Bronze Silver Plating
Insulator Polyamide Resin Black

Contact Arrangement Diagram


Connection Work Method (Relay type can be done by the same method.)

Number of Cores Wrench Spacing (mm) D Dimension (mm) Wrench Tightening Force
4.6 7.5 10 1.5 N・m (15 kgf・cm)
10.12 9.5 16 1.5 N・m (15 kgf・cm)

Connector assembly is performed in the following order.
(1) Pass the cable through the cord bushing and connector body, and then solder to the insulator unit contact.
(2) After soldering the wire to the connector, crimp the clamp brackets attached to the connector with the crimp tool (HR10A-TC-02) or pliers.
(3) Fit the insulator unit screw part into the connector body. (Use a wrench and tighten to the values shown in the table.) When tightening the connector body, loosen the D part first so that the solder connection part is not placed under stress.
(4) Tighten the fastening screw so that its tip touches one of the two bosses on the clamp bracket. Note that the fastening screw is fixed with tightening torque of 0.3 N⋅m (3 kgf⋅cm).
(5) Finally, cover the the cord bushing with the connector body.

Connector Insertion and Removal Method

Basic Information

Connector Shape Circular Type Connector series initials G・H・I G·H·I HR10
Application Cable to cable Allowable Current(A) 2 Allowable Voltage(V) 100 / 140
Wire connection method Solder Connection direction Straight Protection function (environmentally resistant) None
Removal method One-touch Notice 140V Notice 100V

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(65) 6733 7211 / FAX:(65) 6733 0211
9:00am - 6:00pm (Monday - Friday)