(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

MWI Series (Terminal Pitch 7 mm), Mounting Method: DIN Rail / Direct Mount

MWI Series (Terminal Pitch 7 mm), Mounting Method: DIN Rail / Direct Mount
  • Volume Discount

This terminal block is effective as a relay terminal block for AC servo motors and can be mounted on DIN rail with a single-action.

  • c-UL
  • CE-Compliant
  • For Signal
  • AC Servo
  • 125 V

● Can be mounted on DIN rail with a single action.

· 50 core is a 2 guide key type.
· Check equipment side specifications for connector array before ordering.

Part Number

Configured Part Number is shown.

MWI-MIL50-TB50

Specification Table

ModelNumber of Poles
MWI-MIL50-TB5050

Overview of Specifications

Conforming connector
ModelNumber of PolesNumber of Guide KeysMounting Connector (Hirose Electric) MaleRecommended harnessWeight of Connector Terminal Block (g)
MWI-MIL50-TB50502HIF3BA-50PA-2.54DSA71HIFS Series208
Specifications
Rated Voltage125 V AC/DC
Rated Current1 A
Withstand Voltage500 V AC for 1 min.
Vibration-ResistantDouble amplitude 1.5 mm / 1 hour (10 to 55 Hz/min)
Impact-Resistant10 G Equivalent
Insulation Resistance100 MΩ or more (500 V DC megger)
Ambient Temperature (Operation)−20 to +80°C
Ambient Temperature (Storage)−20 to +80°C
Relative Temperature45 to 85%
 
Pitch Between Terminals7 mm
Terminal Block ScrewM3
Tightening Torque0.6 to 0.9 N·m
Conforming Wire1.25 mm2 Max
(2 mm2 Max: When specified crimp terminal is used)
Material
Terminal BlockUL94V-1 (Polycarbonate)
Terminal screwIron, nickel plating
Terminal boardBrass, tin plating
CaseUL94V-0 (Polycarbonate)
Part Number
MWI-MIL50-TB50
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to Ship

SGD 73.23

1 Piece(s)Available 4 Day(s) or more

Loading...

  1. 1

Basic Information

Connector MIL connector Terminal Block Screw M3 Number of connector cores(Pole) 50
Mounting Method DIN rail/Direct attachment Pitch Between Terminals(mm) 7 Supported equipment Servomotor
Supported equipment manufacturer Yasukawa Electric / Panasonic Electronic Works Representative Standard CE / CUL Dimension vertical(mm) 49
Dimension width(mm) 185 Dimension depth(mm) 45 Supported crimp terminal Y Terminal / Round Terminal
Number of terminal block electrodes(Pole) 50 Terminal block screw type Self-Up

Please check the type/dimensions/specifications of the part MWI-MIL50-TB50 in the MWI Series (Terminal Pitch 7 mm), Mounting Method: DIN Rail / Direct Mount series.

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(65) 6733 7211 / FAX:(65) 6733 0211
9:00am - 6:00pm (Monday - Friday)