Solder/Press Contact (Low Cost) D-Sub Connector

Solder/Press Contact (Low Cost) D-Sub Connector
  • Volume Discount

D-sub connector. Same product quality as Japanese products with dimple processing and plated pin finishing

  • For Signal
  • Connection between Boards
  • PLC
  • RS422
  • Solder
  • Gold Plated
  • Screw Lock

● D-sub connector that is priced reasonably by using the press contact for contacts in order to keep down the cost of the entire connector.
● Gold plate processing is applied to the contact so that the contact performance is stably sustainable for a long period of time.
● Dimple processing (protrusion) is present in the shell contact components, allowing secure connections that can even withstand usage with vibrating components.
● UL94V-0 is used for the insulator.


Rated Current
Rated VoltageWithstand Voltage (1 minute)Insulation Resistance (500V DC)Contact ResistanceOperating Temperature
3A500V AC1000V DC1000 MΩ or moreBelow 30 mΩ-55°C – +105°C
Compatible Electric Wire Size: AWG20 – AWG30 or 0.5 mm2 – 0.05 mm2


· Hood and fixing bracket are not included with the connector. Purchase separately.
· It can also be connected with other manufacturers' D-sub connectors, but check the dimensions and properties before use.

PDF

Specifications

Solder/Press Contact (Low Cost) D-Sub Connector:Related Image

Model NumberNumber of CoresType
DB-9SP9Male (Pin)
DB-15SP15
DB-25SP25
DB-37SP37
DB-50SP50
DB-9SS9Female (Socket)
DB-15SS15
DB-25SS25
DB-37SS37
DB-50SS50

More Information

Solder/Press Contact (Low Cost) D-Sub Connector:Related Image

Solder/Press Contact (Low Cost) D-Sub Connector:Related Image

Material / Finish

ItemMaterialFinish
Contact (Press Contact)Copper AlloyGold Plate
InsulatorGlass-Filled Polybutylene TerephthalateUL94V-0, White
ShellSteelTin Plating on Galvanizing

Part Number
DB-9SP
DB-9SS
DB-15SP
DB-15SS
DB-25SP
DB-25SS
DB-37SP
DB-37SS
DB-50SP
DB-50SS
Part NumberVolume DiscountDays to ShipRoHSConnector series initials Applicable pin/contact Number Of Cores
Available Same day 6D· E· FMale (plug)9
Available Same day 6D· E· FFemale (socket)9
Available Same day 6D· E· FMale (plug)15
Available Same day 6D· E· FFemale (socket)15
Available Same day 6D· E· FMale (plug)25
Available Same day 6D· E· FFemale (socket)25
Available Same day 6D· E· FMale (plug)37
Available 3 Day(s) or more 6D· E· FFemale (socket)37
Available 3 Day(s) or more 6D· E· FMale (plug)50
Available 3 Day(s) or more 6D· E· FFemale (socket)50

Loading...

  1. 1

Compatible Wire Size

Connector Type Compatible Wire Size
AWG Size Conductor Cross-Sectional Area (mm2)
Solder Connection Type Finer than 20 Less than 0.53
Pressure Weld Connection Type 1.27 mm Pitch 28 Flat Cable
High-density Solder Connection Type 22 ~ 28 0.08 ~ 0.32
Terminal Block Built in Type 14 ~ 26 2.0 ~ 1.5
High Current Type For 10A 16 ~ 12 0.3 ~ 1.25
For 20A 12 ~ 18 0.75 ~ 3.5
・ When mounting a hood, the wires in the table at left may not be usable, depending on the cable extraction port diameter. Use with due attention to the cable finished outer diameter, etc.

Panel Size

Solder Connection / Pressure Weld Connection Type
● Dimension Table
Number of Cores A±0.15 B±0.2 C±0.2
High Current Type High-density type Others
- 15 9 24.99 20.6 12.0
3 26 15 33.32 28.8 12.0
5 44 25 47.04 42.6 12.0
8 62 37 63.50 59.0 12.0
- 78 50 61.11 56.6 15.2
Mounting holes for panel front and rear mounting are common.

Pressure Weld Connection Type

a. Dimensions when mounting the connector from panel front
● Dimension Table
Number of Cores A1 B1
9 24.99 22.00
15 33.32 30.30
25 47.04 44.00
37 63.05 60.50
b. Dimensions when mounting the connector from panel rear
● Dimension Table
Number of Cores A2 B2
9 24.99 20.20
15 33.32 28.60
25 47.04 42.50
37 63.05 59.20

Contact Arrangement Diagram

Shell Size Group E A B C D
Standard Type
High-density type

Basic Information

Connector Shape Square shape D· E· F Dsub Application Cable to Circuit Board
Allowable Current(A) 1 Allowable Voltage(V) 250 Wire connection method Solder
Connection direction Straight Protection function (environmentally resistant) None Maximum Voltage(Vr.m.s) 500
Removal method Others

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(65) 6335 0315 / (65) 6733 7211 / FAX:(65) 6733 0211
9:00am - 6:00pm (Monday - Friday)
9:00am - 3:00pm (Saturday)