Heat Shrink Tubes Printable, Shrinkage2:1
Brand :
MISUMI
Caution
Product Description
This is an economy item, The price is cheaper than the MISUMI standard product.
[Features]
The outer shrink tube is made from soft polyolefin.
Shrinks quickly, can print letters, white model, long-lasting material.
Shrinkage ratio 2:1 to less than 3:1
Operating temperature range -55-125°C
Packaging 100 m / roll
Economy Printable Heat Shrink Tube
Printable Surface Fast Shrinkage Soft Polyolefin
- Printable Surface: Allows for custom labeling and identification.
- Fast Shrinkage: Reduces application time.
- Flame Retardant: Ensures safety in various applications.
- Cable gland with multiple size options
- Excellent Electrical Properties: High dielectric strength and volume resistivity for insulation protection.
MISUMI Standard
Cheaper Price
Product Variety
3D CAD Support
Product of heat shrink tube Overview
● The outer layer is made of soft polyolefin● Fast shrinkage, character printable, white heat shrink tube model. Material is colorfast.
● Main functions of the product: Cable interface identification for signal and power system
● No printing service is available, and the customer needs to print by himself
● Specifications heat shrink tube are complete, with 6 specifications available for selection.
* Note: each roll of heat shrink tube may have 1 to 3 adapters, which conforms to the industry standard and does not affect the quality. Please feel free to use!
Product of heat shrink tube Feature
Dimensional of heat shrink tube Drawing
| Before heat shrink tube (mm) | After heat shrink tube (mm) | |||||||||||||
| Part number | Minimum Inner Diameter D | Maximum Inner Diameter d | Wall Thickness h | |||||||||||
| MTUBE-YZ-2.4 | 2.4 | 1.20 | 0.51±0.10 | |||||||||||
| MTUBE-YZ-3.2 | 3.2 | 1.60 | 0.51±0.10 | |||||||||||
| MTUBE-YZ-4.8 | 4.8 | 2.4 | 0.51±0.10 | |||||||||||
| MTUBE-YZ-6.4 | 6.4 | 3.2 | 0.64±0.10 | |||||||||||
| MTUBE-YZ-9.5 | 9.5 | 4.8 | 0.64±0.10 | |||||||||||
| MTUBE-YZ-12.7 | 12.7 | 6.4 | 0.64±0.10 | |||||||||||
Specifications heat shrink tube Overview
Basic heat shrink tube Specifications
| heat shrink tube Material | Polyolefin | ||||||||
| Shrinkage Ratio | 2:1 | ||||||||
| Operating Temperature Range | -55-125℃ | ||||||||
| Initial Shrinkage Temperature | 80℃ | ||||||||
| Minimum Complete Shrinkage Temperature | 110℃ |
Performance heat shrink tube Indicator
| heat shrink tube Item | Indicator Requirements | Test Method | Typical Value | ||||||||||||||||
| Longitudinal Shrinkage Rate (200±5 ℃ for 3 minutes) | ±10% | ASTM D 2671 | ±7% | ||||||||||||||||
| Tensile Strength | ≥9.0MPa | ASTM D 638 | 10 Mpa | ||||||||||||||||
| Breakage Elongation | ≥250% | ASTM D 638 | 500% | ||||||||||||||||
| Breakage Elongation After Aging (Thermal aging for 168 hours at 158℃) | ≥100% | ASTM D 638 | 300% | ||||||||||||||||
| Thermal Shock (200±5 ℃ for 4 hours) | The outer layer is crack free, trickling free and dripping free | ASTM D 2671 | pass | ||||||||||||||||
| Low Temperature Flexibility (4 hours at -55 ℃) | Crack Free | ASTM D 2671 | pass | ||||||||||||||||
| Dielectric Strength and Breakdown | 2500V, 60sec, no breakdown | ASTM D 2671 | pass | ||||||||||||||||
| Volume Resistivity | ≥1012Ω·cm min. | ASTM D 876 | 1014Ω·cm | ||||||||||||||||
| Copper Corrosion (121±2℃ for 16 hours) | No Corrosion | ASTM D 2671 | pass | ||||||||||||||||
| Copper Stability (168 hours at 158 ℃) | Elongation≥100% | ASTM D 2671 | pass |
Usage of heat shrink tube Method
Example of heat shrink tube Use
