Metal Collars Standard/Precision Grade, Dimension Configurable
Brand :
MISUMI
Caution
Product Description
Product Overview
It is generally used as a component that is cushioned at the workpiece connector and plays a role of precise adjustment of the clearance on the cushioned part.
Dimensional Drawing
Specifications Overview
| Part Number |  Material |  Surface Treatment | V | D | L | |
| Normal | Precision | (0.1mm increments) | ||||
| FNCL | FAC | SS400 | - | 2.0~90.0 | 4.0~100 | 10.0~100.0 |
| FNCLC | FACS | General structural steel or carbon steel | - | |||
| FNCLB | FABSC | Ferroferric Oxide Protective Film | ||||
| FNCLM | FAMSC | Electroless Nickel Plating | ||||
| FNCLA | FAASC | Aluminum Alloy | Clear Anodized | |||
| FNCLAB | - | Black Anodized | ||||
| FNCLSS | FSASC | Austenitic stainless steel | - | |||
If there are requirements for product hardness, refer to
Metal Washer Hardened Products.Specification Table
■Standard Grade
■Precision Grade
| Part Number | V 0.5mm increments (V3 or more) | D | L 0.1mm increments |
| E-FNCL E-FNCLC E-FNCLB E-FNCLM E-FNCLA E-FNCLAB E-FNCLSS | (Selection) 2.0 2.6 (0.5mm increments) 3.0～90.0 | 4.0～10.0 (0.5mm increments) | 10.0~25.0 |
| 25.1~50.0 | |||
| 50.1~75.0 | |||
| 75.1~100.0 | |||
| 10.5～20.0 (0.5mm increments) | 10.0~25.0 | ||
| 25.1~50.0 | |||
| 50.1~75.0 | |||
| 75.1~100.0 | |||
| 21～30 (1mm increments) | 10.0~25.0 | ||
| 25.1~50.0 | |||
| 50.1~75.0 | |||
| 75.1~100.0 | |||
| 31～40 (1mm increments) | 10.0~25.0 | ||
| 25.1~50.0 | |||
| 50.1~75.0 | |||
| 75.1~100.0 | |||
| 41～50 (1mm increments) | 10.0~25.0 | ||
| 25.1~50.0 | |||
| 50.1~75.0 | |||
| 75.1~100.0 | |||
| 51～60 (1mm increments) | 10.0~25.0 | ||
| 25.1~50.0 | |||
| 50.1~75.0 | |||
| 75.1~100.0 | |||
| 61～75 (1mm increments) | 10.0~25.0 | ||
| 25.1~50.0 | |||
| 50.1~75.0 | |||
| 75.1~100.0 | |||
| 76～80 (1mm increments) | 10.0~25.0 | ||
| 25.1~50.0 | |||
| 50.1~75.0 | |||
| 75.1~100.0 | |||
| 81～100 (1mm increments) | 10.0~25.0 | ||
| 25.1~50.0 | |||
| 50.1~75.0 | |||
| 75.1~100.0 | |||
| Machining Conditions *1, *2, *3According to the Foreign Exchange and Foreign Trade Act, the export of products made of A2017 material with an outer diameter exceeding 75mm and an overall length exceeding the outer diameter is restricted. Size D>75 and L>75 is discontinued. | |||
■Precision Grade
| Part Number | V 0.5mm increments (V3 or more) | D | L 0.1mm increments |
| E-FAC E-FACS E-FABSC E-FAMSC E-FAASC E-FSASC | (Selection) 2 2.6 (0.5mm increments) 3.0～90.0 | 4.0～10.0 (0.5mm increments) | 10.0~25.0 |
| 25.1~50.0 | |||
| 50.1~75.0 | |||
| 75.1~100.0 | |||
| 10.5～20.0 (0.5mm increments) | 10.0~25.0 | ||
| 25.1~50.0 | |||
| 50.1~75.0 | |||
| 75.1~100.0 | |||
| 21～30 (1mm increments) | 10.0~25.0 | ||
| 25.1~50.0 | |||
| 50.1~75.0 | |||
| 75.1~100.0 | |||
| 31～40 (1mm increments) | 10.0~25.0 | ||
| 25.1~50.0 | |||
| 50.1~75.0 | |||
| 75.1~100.0 | |||
| 41～50 (1mm increments) | 10.0~25.0 | ||
| 25.1~50.0 | |||
| 50.1~75.0 | |||
| 75.1~100.0 | |||
| 51～60 (1mm increments) | 10.0~25.0 | ||
| 25.1~50.0 | |||
| 50.1~75.0 | |||
| 75.1~100.0 | |||
| 61～80 (1mm increments) | 10.0~25.0 | ||
| 25.1~50.0 | |||
| 50.1~75.0 | |||
| 75.1~100.0 | |||
| 81～100 (1mm increments) | 10.0~25.0 | ||
| 25.1~50.0 | |||
| 50.1~75.0 | |||
| 75.1~100.0 | |||
| Machining Conditions *1, *2, *3 | |||
Machining Conditions*1 Machining Limits of Collar Thickness and Overall Length
10.0≤L≤50.0 -> (D-V)/2≥1
50.1≤L≤100.0-> (D-V)/2≥2
*2 Machining Limits of Collar Thickness and Overall Length (Aluminum Alloy)
4≤D≤10 -> V≤D-2
10.5≤D≤30 -> V≤D-4
31≤D≤60 -> V≤D-6
61≤D≤80 -> V≤D-8
81≤D≤100-> V≤D-10
*3 Machining Limits of V and Overall Length
L≤V×8
Product Features
Feature 1: There is a wide range of options for inner and outer diameters and thickness, and for the L dimension configurable type, the thickness can be specified in 0.1mm increments.
Feature 2: High-precision products made by cutting and machining can realize high-precision spatial adjustment.
Feature 3: Depending on the design requirements, there are three types of optional materials: general structural steel or carbon steel (equivalent), aluminum alloy and austenitic stainless steel.
Feature 4: For products made of general structural steel or carbon steel, there are two types of optional surface treatment: ferroferric oxide protective film and electroless nickel plating. For products made of aluminum alloy, the surface treatment is clear anodizing.
Feature 2: High-precision products made by cutting and machining can realize high-precision spatial adjustment.
Feature 3: Depending on the design requirements, there are three types of optional materials: general structural steel or carbon steel (equivalent), aluminum alloy and austenitic stainless steel.
Feature 4: For products made of general structural steel or carbon steel, there are two types of optional surface treatment: ferroferric oxide protective film and electroless nickel plating. For products made of aluminum alloy, the surface treatment is clear anodizing.
Usage Method
| Diagram | Instructions |
 | It can be used to ensure the relative position between two timing pulleys. |
 | It can be used for limiting the position of the linear parts or fixed parts on the shaft. |
 | Can be matched with screws to control the relative clearance between the sheet metal and the support. |
Precautions
①When the relative humidity of the operating environment is high and certain anti-rust ability is required, please choose products with electroless nickel plating surface treatment or stainless steel SUS3 series materials.
②When the operating environment requires certain abrasion resistance and hardness for metal collars, give priority to metal washer hardened products.
②When the operating environment requires certain abrasion resistance and hardness for metal collars, give priority to metal washer hardened products.
Example of Use
■Mechanism name
Different fixtures used according to the frequency of process switching.
■Mechanism function
Because of the use of fast-fixing parts and replaceable positioning parts, it can be used as a support fixture for a variety of workpieces.
■Role of metal collar
A metal collar is placed on the fixed surface of the toggle clamp to limit the height of the toggle clamp. For workpieces of different thicknesses, a variety of metal collars of different lengths can be replaced.
For detailed information, click
inCADLibrary Application Library.
Different fixtures used according to the frequency of process switching.
■Mechanism function
Because of the use of fast-fixing parts and replaceable positioning parts, it can be used as a support fixture for a variety of workpieces.
■Role of metal collar
A metal collar is placed on the fixed surface of the toggle clamp to limit the height of the toggle clamp. For workpieces of different thicknesses, a variety of metal collars of different lengths can be replaced.
For detailed information, click
inCADLibrary Application Library.Application Industries
| Smart Phones | Electronic & Electrical | Lithium battery | ||
 |  |  | ||
| Automotive | Robotics | Medical | ||
 |  |  |
Related Products
| Ultra short head hex socket bolt | Adjustment Screw Components Hex Head Stud | Axle Pin Bolt | ||
 |  |  | ||
| Representative model: CBSA6-12 | Representative model: ANH4-20 | Representative model: DBTS6-3-10 | ||
| Advantages: space saving, sufficient stock | Advantages: Front end hardened, optional length | Advantages: Accurate positioning, high shaft precision |
Related Documents