Resin Oli Free Bushing, Abrasion Resitance(POM)

・Oil Free Bushings has such features as excellent self-lubrication, wear resistance, and low friction coefficient. Normal operation is enabled even with poor lubrication.
・Oil Free Bushings, a metal replacement used as the material of oil free bushings, have major advantages: lubrication and maintenance free, longer service life, good corrosion resistance performance, high cost effectiveness, etc..
・Oil Free Bushings bearings are suitable for clean room and contaminated environments, as well as vacuum and high-humidity environments.

1. Highly abrasion resistant and low abrasion Oil Free Bushings, suitable for operating under high-speed and medium-to-low load conditions.
2. Lower friction coefficient, allowing normal use for dry-running or less sticky surfaces.
3. Oil Free Bushings Max. operating temperature +90℃ (short-term +120℃), min. operating temperature -50℃.
4. Outstanding vibration absorption, high abrasion resistance, high chemical resistance and other features.

(Unit: mm)

Recommended to be used for pressing in and fixing the Oil Free Bushings.
Material of Oil Free Bushings: POM

 

Part Number of Oil Free Bushings		Total Length L														d (Tolerance after pressing-in)		D	F	T
Type of Oil Free Bushings	No.
E-MJBZ (Oil Free Bushings Straight Type) E-MJFZ (Oil Free Bushings Shouldered Type)	0304	03*		05												3	+0.014 +0.054	4.5	7.5	0.75
	0405	03*	(04)		06*		(08)									4	+0.020 +0.068	5.5	9.5
	0506			05*												5		6	10	0.5
	0507			05					(10)									7	11	1
	0608		04*		06		08		10							6		8	12	1
	0810			05*	06*	07*	08		10	(12)						8	+0.025 +0.083	10	15
	0812								(10)								+0.040 +0.130	12	－	－
	1012			05*	(06)			09*	10	12*	15			(20)		10	+0.025 +0.083		18	1
	1014								(10)			(16)					+0.040 +0.130	14	－	－
	1214			05*		07*		09*	(10)	12*	15					12	+0.032 +0.102		20	1
	1216									(12)							+0.050 +0.160	16	－	－
	1416										(15)		17*			14	+0.032 +0.102		22	1
	1517		04*					09*		12*			17*			15		17	23
	1618									(12)	(15)		17*	(20)		16		18	24
	1620											(16)					+0.050 +0.160	20	－	－
	1820		04*													18	+0.032 +0.102		26	1
	2026										15*			20*		20	+0.065 +0.195	26	32	3
	3034														26*	30	+0.040 +0.124	34	42	2

Dimensions Oil Free Bushings L with ( ) is only for the straight type
Dimensions Oil Free Bushings L with * is only for the shouldered type

(Unit: mm)

Recommended to be used for pressing in and fixing the bushing.
Material: POM

 

Part Number		Total Length L														d (Tolerance after pressing-in)		D	F	T
Type	No.
E-MJBZ (Straight Type) E-MJFZ (Shouldered Type)	0304	03*		05												3	+0.014 +0.054	4.5	7.5	0.75
	0405	03*	(04)		06*		(08)									4	+0.020 +0.068	5.5	9.5
	0506			05*												5		6	10	0.5
	0507			05					(10)									7	11	1
	0608		04*		06		08		10							6		8	12	1
	0810			05*	06*	07*	08		10	(12)						8	+0.025 +0.083	10	15
	0812								(10)								+0.040 +0.130	12	－	－
	1012			05*	(06)			09*	10	12*	15			(20)		10	+0.025 +0.083		18	1
	1014								(10)			(16)					+0.040 +0.130	14	－	－
	1214			05*		07*		09*	(10)	12*	15					12	+0.032 +0.102		20	1
	1216									(12)							+0.050 +0.160	16	－	－
	1416										(15)		17*			14	+0.032 +0.102		22	1
	1517		04*					09*		12*			17*			15		17	23
	1618									(12)	(15)		17*	(20)		16		18	24
	1620											(16)					+0.050 +0.160	20	－	－
	1820		04*													18	+0.032 +0.102		26	1
	2026										15*			20*		20	+0.065 +0.195	26	32	3
	3034														26*	30	+0.040 +0.124	34	42	2

Dimensions L with ( ) is only for the straight type
Dimensions L with * is only for the shouldered type