Miniature Linear Guides Long Blocks

Brand :

MISUMI

Caution

Product Description

Miniature Linear Guides Long Blocks
These linear guides or linear slides are an economy item, The price is cheaper than the MISUMI standard product.They offer a wide variety of sizes to choose from.
[Feature]
● Rail Length Minimum/Maximum (mm.): 40 and 670
● Assembly Height (mm.): 8, 10, 13, and 16
● Option: Set (Rail + Block) / Block only
● Material: Rail- Bearing Steel, Block - SUS440C
[Application]
It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.

Economy Miniature Linear Guide - Long Block

PrecisionVersatilityCost-effective

- Rail lengths available in multiple options

- Multiple assembly heights available

- Options for rail and block set or block only

- Constructed with Carbon Steel for durability

- Economical choice compared to standard MISUMI products

Economy Miniature Linear Guide - Long Block

MISUMI Standard

Cheaper Price

Product Variety

3D CAD
3D CAD Support

Product Overview

Linear guides (also known as slide rails or linear slides) are designed for precise linear motion and are used in high-precision applications. They provide higher load capacity and motion accuracy than linear bearings of the same size.
These guides use rolling elements (such as steel balls) instead of an intermediate medium, allowing for smooth, precise movement even under high load conditions. They are commonly used in equipment like CNC machines, robotics, and automated systems.

Product Comparison

	MISUMI Standard Product SSELB8-100	Economy Series E-GMLG7H-100
Material	Stainless Steel	Carbon Steel
Hardness	56HRC up	58HRC up
Basic Rated Load C (Dynamic) (kN)	1.6	1.37
Basic Rated Load Co (Static) (kN)	2.4	1.96
Static Allowable Moment MA/MB (N・m)	7.5	4.8
Static Allowable Moment MC (N・m)	9	7.64
Height H Tolerance Difference (μm)	±20	±20
Height H Pair Variation Difference (μm)	15	40
Width N Tolerance Difference (μm)	±25	±25
Width N Pair Variation Difference (μm)	20	40
Running Parallelism Guarantee (μm)*	7	15
Preload Management	Y	N
RoHS10	Compliant	Compliant

*Running parallelism varies by rail length.

Dimensional Drawing

■ Material

Type	Material		Rail Surface Treatment	Hardness	Preload
	Guide Rail	Block
E－MLG	Bearing Steel	Stainless Steel	-	58-62HRC	Z0 Ordinary Grade No Gap Type
E－GMLG			Vacuum evaporated chrome plating
E－SMLG	Stainless Steel		-	55-58HRC
E－MLGB	-	Stainless Steel	-	-

Specification Table

■ Component kit

Part Number		Length L (1mm increments)	Block Dimensions (mm)									Guide Rail Dimensions (mm)
Type	Nominal Model	Length L (1mm increments)	W	B	B₁	L₁	L₂	C	M×ℓ	H₂	Gn	WR	HR	N	H	H₁	Counterbore d×D×h	P	E
E－MLG E－GMLG E－SMLG	7H	40～900	17	12	2.5	20.75	30.71	13	M2×2.5	1.5	Φ1.2	7	4.8	5	8	1.5	2.4×4.2×2.3	15	Please refer to the L specified size calculation table
	9H	45～900	20	15	2.5	28.5	39.9	16	M3×3	1.8	Φ1.4	9	6.5	5.5	10	2	3.6×6×3.5	20
	12H	60～900	27	20	3.5	30.8	44.78	20	M3×3.5	2.5	Φ2	12	8	7.5	13	3	3.6×6×4.5	25
	15H	70～900	32	25	3.5	41.8	57.96	25	M3×4	3	M3	15	10	8.5	16	4	3.6×6×4.5	40

■ Block only

Part Number		Block Dimensions (mm)
Type	Nominal Model	W	B	B₁	L₁	L₂	C	M×ℓ	H₂	Gn
E－MLGB	7H	17	12	2.5	20.75	30.71	13	M2×2.5	1.5	Φ1.2
	9H	20	15	2.5	28.5	39.9	16	M3×3	1.8	Φ1.4
	12H	27	20	3.5	30.8	44.78	20	M3×3.5	2.5	Φ2
	15H	32	25	3.5	41.8	57.96	25	M3×4	3	M3

The dimensional tolerance of L length is ±1mm and

the dimensional tolerance of E end distance is ±0.5mm

■ L Detailed dimension of dimension specified type
Dimension L specified type cuts both ends of the rail equally. Refer to the table below for the number of mounting holes (M) of the slide rail at this time.
In addition, E dimension is calculated with the formula below.
Economy series Linear Guide Length Specified Type E Dimension Calculation Formula

Economy series Linear Guide Length Specified Type E Dimension Calculation Formula

L : Guide Rail length
M: Guide Rail mounting holes
P: Guide Rail holes pitch

■ Economical Miniature Linear Guide - Standard Guide -

Nominal Model	7H	9H	12H	15H	Number of mounting holes M
L	-	45～47	-	70～87	2
	40～50	48～67	60～82	88～127	3
	51～65	68～87	83～107	128～167	4
	66～80	88～107	108～132	168～207	5
	81～95	108～127	133～157	208～247	6
	96～110	128～147	158～182	248～287	7
	111～125	148～167	183～207	288～327	8
	126～140	168～187	208～232	328～367	9
	141～155	188～207	233～257	368～407	10
	156～170	208～227	258～282	408～447	11
	171～185	228～247	283～307	448～487	12
	186～200	248～267	308～332	488～527	13
	201～215	268～287	333～357	528～567	14
	216～230	288～307	358～382	568～607	15
	231～245	308～327	383～407	608～647	16
	246～260	328～347	408～432	648～687	17
	261～275	348～367	433～457	688～727	18
	276～290	368～387	458～482	728～767	19
	291～305	388～407	483～507	768～807	20
	306～320	408～427	508～532	808～847	21
	321～335	428～447	533～557	848～887	22
	336～350	448～467	558～582	888～900	23
	351～365	468～487	583～607	-	24
	366～380	488～507	608～632		25
	381～395	508～527	633～657		26
	396～410	528～547	658～682		27
	411～425	548～567	683～707		28
	426～440	568～587	708～732		29
	441～455	588～607	733～757		30
	456～470	608～627	758～782		31
P	15	20	25	40

Nominal Model	7H	9H	12H	15H	Number of mounting holes M
L	471～485	628～647	783～807	-	32
	486～500	648～667	808～832		33
	501～515	668～687	833～857		34
	516～530	688～707	858～882		35
	531～545	708～727	883～900		36
	546～560	728～747	-		37
	561～575	748～767			38
	576～590	768～787			39
	591～605	788～807			40
	606～620	808～827			41
	621～635	828～847			42
	636～650	848～867			43
	651～665	868～887			44
	666～680	888～900			45
	681～695	-			46
	696～710				47
	711～725				48
	726～740				49
	741～755				50
	756～770				51
	771～785				52
	786～800				53
	801～815				54
	816～830				55
	831～845				56
	846～860				57
	861～875				58
	876～890				59
	891～900				60
P	15	20	25	40

Alterations

Code

Spec.

Change to Tapped Holes

Ordering code: MC
Change counterbored holes for fixing a guide to tapped holes.

Nominal size	MC
7	M3
9,12	M4
15	M5

2-Block Specifications

1 block added to 1-block product to ship as 2 block item.

If the rail is too short to fit multiple blocks, the blocks will be shipped in a separate package.

3-Block Specifications

2 blocks added to 1-block product to ship as 3 block item.

If the rail is too short to fit multiple blocks, the blocks will be shipped in a separate package.

4-Block Specifications

3 blocks added to 1-block product to ship as 4 block item.

If the rail is too short to fit multiple blocks, the blocks will be shipped in a separate package.

Preload adjustment

Change Z0: zero preload to
ZF: Normal clearance
Z1: Light preload
Z2: Medium preload

Rail End Cut

Left End Cut
ES

Specify the edge distance in 0.5 mm increments. When the specified edge distance exceeds or is close to the hole spacing, cutting may result in hole breakage.

EB + ES = 2E. In cases where cutting is not feasible, distribute the dimensions evenly according to the standards.

Right End Cut
EB

Precision Benchmark

●Dimensional Precision

Unit：μm

Linear Guide Type	Precision Criteria	MISUMI Standard Products
Miniature Linear Guide	Height H Tolerance	±40
	Height H Pair Variation	40
	Width N Tolerance	±40
	Width N Pair Variation	40

*Compared to 2022, the accuracy of Economy series products has been improved.

●Running Parallelism

Rail Length (mm)	Accuracy grade (μm)
50 or Less	16
50-80	18
80-125	21
125-200	21
200-250	22
250-315	23
315-400	25
400-500	26
500-630	28
630-800	30
800-900	32

Diagram of Dimensional Precision of the Linear Guide

[Running Parallelism]
The values in the table are all measured after the slide rail is fixed on the reference base.
When moving the slider within the full length of the slide rail, measure the change of the block upper surface C relative to the slide rail bottom surface A and the change of the block reference surface D relative to the slide rail reference surface B.

Diagram of Running Parallelism of the Linear Guide

Diagram of Running Parallelism of the Linear Guide

Allowable Load

Nominal model	Basic Rated Load		Static Allowable Moment		Mass
Nominal model	C(Dynamic） kN	Co（Static） kN	M_A・M_B N.m	M_C N.m	Blocks kg	Guide Rails kg/m
7H	1.37	1.96	4.8	7.64	0.0124	0.22
9H	2.55	4.02	18.62	19.6	0.0215	0.38
12H	3.72	5.88	36.26	38.22	0.044	0.65
15H	6.37	9.11	57.82	73.5	0.0847	1.06

Product Features

Feature 1: New construction, greatly reducing noise and improving smoothness.
Feature 2: The slide rail and the slider are in contact with each other through the rolling ball, so the shaking is small, and it is suitable for equipment with precision requirements.
Feature 3: Due to a point-to-surface contact, the frictional resistance is small, and it can perform subtle movements to achieve high precision positioning of the control device.
Feature 4: It has a large allowable load because the force on the rotating surface is dispersed due to the rolling groove of the ball.
Feature 5: It is suitable for high speed motion because it is not easy to produce friction heat when operating and not easily deformed by heat.

Usage Method

■ About use
① MISUMI's linear guide is installed with a retainer. Although the ball is not easy to fall off when the slide block is removed, the ball may fall off if the slider is removed from the rail at high speed, or tilted into the slide rail. Please disassemble the slider with care.
② Be sure to avoid colliding the ball back groove cover, otherwise it will affect the ball cycling, resulting in poor sliding.
③ If you have anti-rust requirements, please choose the Vacuum Chrome Plating Surface Treatment or Stainless Steel SUS440C products.
MISUMI Miniature Linear Guide Slider Precautions

■ About maintenance (supply of grease)
① Grease forms an oil film on the surface of the linear guide ball and rail surface to effectively reduce friction and prevent sintering.
Decrease and aging of grease will greatly affect the life of the linear guide, so please add grease at the right time according to the service conditions.
MISUMI's linear guides are sealed with the greases listed below at the time of shipment, so they can be used directly.
② Recommend grease filling interval:
Usually every 6 months.
For longer moving distance, 3 months, or when the moving distance exceeds 1000km within the time limit, the 1000km shall prevail.
*The above is the grease injection interval under the moving distance standard. Depending on the operating environment, the grease injection interval must be shortened appropriately when the grease is aging and dirty.

Precautions

For normal use, the installation of the linear guide needs to meet the following four points:

① Whether the shape of the mounting surface produces interference
Flatness of MISUMI mounting surface

② Keep the flatness of the workpiece mounting surface at about 5μ, otherwise the slider will be slightly deformed
MISUMI parallelism error tolerance

③ Whether the error values of guide parallelism and fitting height are within the allowable installation values
Allowable height error tolerance of linear-guides

Allowable height error tolerance of linear-guides

④ Use the standard
Installation method of linear guides

installation method Click

here for the detailed installation method

Example of Use

Mechanism Name: 4 times stroke slide
Feature 1: suitable for medium frequency driving and positioning.
Feature 2: transfer the light workpiece on the worktable according to 4 times the distance of the cylinder stroke.

For details, click

here

Application Industries

Medical		Smart phone

Robotics		Electronic & Electrical Appliances

Miniature Linear Guides	Medium Load linear guide	Heavy Load linear guide

Typical model: SSEBZ10-55	Typical model: SVR24-280	Typical model: SXR24-280