Stepper Motors 20 Series
Brand :
MISUMI
Caution
Product Description
Product Overview of Stepping Motors
MISUMI Stepping Motors 20 Series
Product Features of Stepping Motors
Dimensional Drawing of Stepping Motors
* The values in ( ) are reference values.
Specification Table of Stepping Motors
■Stepping Motors Package
Individual Stepping Motors can be purchased separately and ordered as C-DR42A.
| Part Number of Stepping Motors |  Stepping Motors Model | Step Angle (°) | Body Length (mm) | Number of Leads (pcs) | Current/Phase (A) | Holding Torque (MN·m) | Moment of Inertia (g·cm²) | Stepping Motors Output Current (A) | Stepping Motors Power Voltage (V) | Subdivision |
 Type | ||||||||||
| C-20STM01 | DR42A (Only when the driver is included) | 1.8 | 33 | 4 | 0.6 | 18 | 2.9 | 0.1~2.2 | DC: 15～32 | 200~20000 |
| C-20STM02 | 38 | 40 | 3.3 | |||||||
| C-20STM03 | 45 | 44 | 3.8 |
Individual Stepping Motors can be purchased separately and ordered as C-DR42A.Dimensional Drawing
* The values in ( ) are reference values.
Specification Table
■Package
Individual drives can be purchased separately and ordered as C-DR42A.
| Part Number |  Driver Model | Step Angle (°) | Body Length (mm) | Number of Leads (pcs) | Current/Phase (A) | Holding Torque (MN·m) | Moment of Inertia (g·cm²) | Driver Output Current (A) | Driver Power Voltage (V) | Subdivision |
 Type | ||||||||||
| C-20STM01 | DR42A (Only when the driver is included) | 1.8 | 33 | 4 | 0.6 | 18 | 2.9 | 0.1~2.2 | DC: 15～32 | 200~20000 |
| C-20STM02 | 38 | 40 | 3.3 | |||||||
| C-20STM03 | 45 | 44 | 3.8 |
Individual drives can be purchased separately and ordered as C-DR42A. Torque-Frequency Curve
Example of Use
Applications of the stepper motor in the medical industry
Precautions
Note
1. The maximum current set by the driver shall not exceed the maximum current of the motor.
2. The subdivision can only adjust the smoothness of rotation, rather than increase the precision.
3. The stepper motor needs to be used with the stepper driver, and cannot be directly connected to the power supply.
4. It is normal if the surface temperature of the stepper motor is between 80~90℃.
1. The maximum current set by the driver shall not exceed the maximum current of the motor.
2. The subdivision can only adjust the smoothness of rotation, rather than increase the precision.
3. The stepper motor needs to be used with the stepper driver, and cannot be directly connected to the power supply.
4. It is normal if the surface temperature of the stepper motor is between 80~90℃.
Related Products
