Floating Joints Quick Connection Type With Holder
Brand :
MISUMI
Caution
Product Description
Product Overview of Floating Joints
The part connecting the Floating Joints and the driven workpiece, mainly used to absorb the lateral misalignment between the Floating Joints piston rod and the driven workpiece.
Product Feature of Floating Joints
Feature 1: Miniaturization design after the strength test and verification.
Feature 2: The connection length of Floating Joints is shortened by more than 20%, and the installation area is reduced by more than 30%.
Feature 3: Floating Joints can reduce the requirements on installation accuracy (coaxiality or concentricity) between the Floating Joints and the driven workpiece.
Feature 4: Hard chrome-plated surface treatment Floating Joints with excellent abrasion resistance, ensuring anti-rust and abrasion-resistant performance.
Feature 2: The connection length of Floating Joints is shortened by more than 20%, and the installation area is reduced by more than 30%.
Feature 3: Floating Joints can reduce the requirements on installation accuracy (coaxiality or concentricity) between the Floating Joints and the driven workpiece.
Feature 4: Hard chrome-plated surface treatment Floating Joints with excellent abrasion resistance, ensuring anti-rust and abrasion-resistant performance.
Dimensional Drawing of Floating Joints
Specifications Overview of Floating Joints
| Type of Floating Joints | Floating Joints Type |  Floating Joints Material | Holder Material |  Surface Treatment |  Surface Hardness |
| C-FJRHA | C-FJR | Equivalent to SUM material | General structural steel | Hard Chrome Plated | 750HV to |
| Part Number | Floating Joints connector | Holder | |||||||||||||||
 Type |  M-Pitch | T | D | L | h | B | (C) | D1 | A | T1 | h1 | W | H | a | P | d | Lu |
| C-FJRHA | 4-0.7 | 3 | 7 | 5 | 3 | 10 | 11.5 | 8 | 14 | 7 | 4 | 32 | 13 | 5 | 23 | 4.5 | 12 |
| 5-0.8 | 3 | 8 | 6 | 3 | 12 | 13.9 | 9 | 16 | 7 | 4 | 34 | 14 | 5 | 25 | 4.5 | 13 | |
| 6-1.0 | 4 | 10 | 7 | 4 | 14 | 16.2 | 11 | 19 | 9 | 5 | 41 | 16.5 | 6 | 30 | 5.5 | 16 | |
| 8-1.25 | 4 | 13 | 8 | 4 | 17 | 19.6 | 14 | 22 | 9 | 5 | 44 | 20 | 8 | 33 | 5.5 | 17 | |
| 10-1.25 | 5 | 16 | 8 | 4 | 21 | 24.2 | 18 | 27 | 10 | 5 | 51 | 24 | 9 | 39 | 6.6 | 18 | |
Precautions of Floating Joints
① Clear intended use of Floating Joints
This product is only used to absorb the tiny (lateral misalignment) or (angular misalignment) between the Floating Joints and the driven workpiece in linear motion. Never use it for rotating motion connection
② Be sure to use a Floating Joints equipped with a cushioning mechanism
When the driven workpiece is stopped, do not let the Floating Joints be subjected to impact force. Be sure to use a Floating Joints equipped with a cushioning mechanism (rubber or air cushioning).
③ In order to prevent the driven workpiece from losing control, please set up a stop cushioning structure externally.
When the connecting thread is subjected to excessive impact load, it may cause damage to the of Floating Joints, make the driven workpiece lose control, and even fall, thus damaging the equipment or causing harm to human body. Therefore, besure to set up a stop cushioning structure externally.
This product is only used to absorb the tiny (lateral misalignment) or (angular misalignment) between the Floating Joints and the driven workpiece in linear motion. Never use it for rotating motion connection
② Be sure to use a Floating Joints equipped with a cushioning mechanism
When the driven workpiece is stopped, do not let the Floating Joints be subjected to impact force. Be sure to use a Floating Joints equipped with a cushioning mechanism (rubber or air cushioning).
③ In order to prevent the driven workpiece from losing control, please set up a stop cushioning structure externally.
When the connecting thread is subjected to excessive impact load, it may cause damage to the of Floating Joints, make the driven workpiece lose control, and even fall, thus damaging the equipment or causing harm to human body. Therefore, besure to set up a stop cushioning structure externally.
Example Use of Floating Joints
Equipment name: Mechanism for changing transmission direction during transportation
Mechanism function:
During the transportation process, the Floating Joints power can be used to change the moving direction of the workpiece.
Role of Floating Joints:
The Floating Joints push rod and the workpiece ejector rod are connected by a Floating Joints. Because lateral misalignment and angular misalignment are allowed, the installation of the structure becomes convenient and the service life of themechanism is prolonged.
Mechanism function:
During the transportation process, the Floating Joints power can be used to change the moving direction of the workpiece.
Role of Floating Joints:
The Floating Joints push rod and the workpiece ejector rod are connected by a Floating Joints. Because lateral misalignment and angular misalignment are allowed, the installation of the structure becomes convenient and the service life of themechanism is prolonged.
Application Industries of Floating Joints
| Smart phone | Electronic & Electrical Appliances | Lithium battery | ||
 |  |  | ||
| Automotive | Robotics | Medical | ||
 |  |  |
Related Products of Floating Joints
| Bearing Housing Assembly Single Bearing Type with Retaining Ring | Shaft Supports T Shape Slit | Post Clamp |
 |  |  |
| Typical model: BGRAB6000ZZ | Typical model: SHSTM8-25 | Typical model: KDST20 |