(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

7 Million Products, 2,000 Brands.
50,000 Stock items for Same Day Ship Out.

All Categories

Categories

Search by Application

Brands

  • MISUMI TECHNICAL LIBRARY
  • Mold EX Press
  • Need a copy of MISUMI Catalog?
Webcode Seach | Series
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products
Quote / Order

Part Number Checker

  • Please be informed that our operating hours are from 9:00~15:00 during the upcoming Vesak Day Holiday 2024. Click here for details.
  • Please Note our New Address (effective April 1, 2024): 331 North Bridge Rd, #05-01 Odeon 331, Singapore 188720.

  • How can we improve?

    How can we improve?

    Feedback
    Name (Optional)
    E-mail Address (Optional)
    Tel (Optional)

    Thank you for your time.
    Your feedback is essential for our continuous improvement
    Privacy Policy

    Thank you for your cooperation.

    Thank you for your time.
    Your feedback is essential for our continuous improvement
    Please use the inquiry form.

    Privacy Policy

Timing Belts S5M (C-HTBN1225S5M-250)

Timing Belts S5M C-HTBN1225S5M-250
  • Volume Discount
Check FAQ of this product (7 items)

MISUMI

MiSUMi Economy 80

MISUMI

Timing Belts S5M
It is a circular tooth profile timing belt. This belt always uses for high torque transmission in an automation machine
[Features]
• Belt Shape: Closed End
• Belt Tooth Type: S5M (round tooth profile)
• Tooth Pitch: 5 mm.
• Belt Width: 10, 15 and 20 mm.
• Circumference Length Shortest/Longest: 225 mm. and 3580 mm.
• Belt Operating Temperature Range: -30 to 90℃.
• Material:
Tooth rubber: Chloroprene
Core wire: Glass Fiber
Backing cloth layer: Nylon canvas
[Applications]
Suitable for use with a timing pulley in a transmission system in an automation machine

Part Number

Configured Part Number is shown.

C-HTBN1225S5M-250


Product Overview
Usually, timing pulleys and timing belts are widely used to design mechanisms for transmitting rotational power generated by motors.
Driving and transmission are realized through the engagement between the teeth of timing pulleys and timing belts.

Dimensional Drawing
Dimensional drawing of MISUMI economic type belt

■Material/Specification Table
 Material
① Rear rubberChloroprene
② Tooth rubber
③ Core wireGlass Fiber
④ Backing clothNylon canvas

Specifications Overview
TypesTooth pitchRaLrHhiPLDUnit weight g/m
(Width: 10mm)
S5M53.253.253.411.911.50.4834
Belt circumference length is core wire length.
C-HTBN belt operating temperature range: -30 to 90 ℃.
The model engraved on the back of the product is the manufacturer model.
MISUMI makes no commitment to this product brand.
For the transmission capacity and calculation and design method of economy series timing belt, please refer to the national standard (GB) design manual.
Specification Table
■Specification Table
Economic type Toothed timing belt S2M S3M S5M S8M S14M type Ordering example

■C-HTBN
■Type S5M (Tooth pitch: 5mm)
Part NumberBelt
Nominal Width		Number of TeethBelt Circumference Length
(mm)
TypeBelt Number
C-HTBN150S5M100
(10mm)

150
(15mm)

250
(25mm)		30150
160S5M32160
180S5M36180
185S5M37185
200S5M40200
215S5M43215
220S5M44220
225S5M45225
230S5M46230
235S5M47235
240S5M48240
245S5M49245
250S5M50250
255S5M51255
260S5M52260
265S5M53265
270S5M54270
275S5M55275
280S5M56280
285S5M57285
290S5M58290
295S5M59295
300S5M60300
305S5M61305
310S5M62310
315S5M63315
320S5M64320
325S5M65325
330S5M66330
335S5M67335
340S5M68340
345S5M69345
350S5M70350
355S5M71355
360S5M72360
365S5M73365
370S5M74370
375S5M75375
380S5M76380
385S5M77385
390S5M78390
395S5M79395
400S5M80400
405S5M81405
410S5M82410
415S5M83415
420S5M84420
425S5M85425
430S5M86430
435S5M87435
440S5M88440
445S5M89445
450S5M90450
455S5M91455
460S5M92460
465S5M93465
470S5M94470
475S5M95475
480S5M96480
485S5M97485
490S5M98490
495S5M99495
500S5M100500
505S5M101505
510S5M102510
515S5M103515
520S5M104520
525S5M105525
530S5M106530
535S5M107535
540S5M108540
545S5M109545
550S5M110550
555S5M111555
560S5M112560
565S5M113565
570S5M114570
575S5M115575
580S5M116580
585S5M117585
590S5M118590
595S5M119595
600S5M120600
610S5M122610
615S5M123615
620S5M124620
625S5M125625
630S5M126630
635S5M127635
640S5M128640
645S5M129645
650S5M130650
655S5M131655
660S5M132660
665S5M133665
670S5M134670
675S5M135675
680S5M136680
685S5M137685
690S5M138690
695S5M139695
700S5M140700
710S5M142710
720S5M144720
725S5M145725
730S5M146730
735S5M147735
740S5M148740
745S5M149745
750S5M150750
755S5M151755
760S5M152760
765S5M153765
770S5M154770
775S5M155775
780S5M156780
785S5M157785
790S5M158790
800S5M160800
810S5M162810
815S5M163815
820S5M164820
825S5M165825
830S5M166830
835S5M167835
840S5M168840
845S5M169845
850S5M170850
860S5M172860
865S5M173865
870S5M174870
880S5M176880
890S5M178890
900S5M180900
905S5M181905
915S5M183915
920S5M184920
925S5M185925
930S5M186930
935S5M187935
940S5M188940
950S5M190950
960S5M192960
970S5M194970
975S5M195975
980S5M196980
1000S5M2001000
1010S5M2021010
1025S5M2051025
1050S5M2101050
1060S5M2121060
1080S5M2161080
1085S5M2171085
1100S5M2201100
1110S5M2221110
1115S5M2231115
1120S5M2241120
1125S5M2251125
1135S5M2271135
1145S5M2291145
1150S5M2301150
1160S5M2321160
1165S5M2331165
1175S5M2351175
1195S5M2391195
1200S5M2401200
1210S5M2421210
1215S5M2431215
1225S5M2451225
1250S5M2501250
1270S5M2541270
1295S5M2591295
1300S5M2601300
1305S5M2611305
1310S5M2621310
1320S5M2641320
1330S5M2661330
1335S5M2671335
1350S5M2701350
1380S5M2761380
1390S5M2781390
1400S5M2801400
1420S5M2841420
1450S5M2901450
1460S5M2921460
1475S5M2951475
1500S5M3001500
1530S5M3061530
1550S5M3101550
1595S5M3191595
1600S5M3201600
1615S5M3231615
1650S5M3301650
1675S5M3351675
1680S5M3361680
1685S5M3371685
1690S5M3381690
1695S5M3391695
1700S5M3401700
1715S5M3431715
1800S5M3601800
1945S5M3891945
1960S5M3921960
2000S5M4002000
2100S5M4202100
2350S5M4702350
2525S5M5052525
2765S5M5532765
2800S5M5602800
2980S5M5962980
3090S5M6183090

Product Feature
S type circular tooth profile economic type timing belt is made of rubber, featuring deviation prevention and wear resistance ■ S type circular tooth profile rubber timing belt (S2M/S3M/S5M/S8M/S14M)
Feature 1: Reasonable semi-circular arc tooth profile design can provide higher torque to adapt to high load transmission.
Feature 2: Reduce the noise generated by high-speed operation.
Feature 3: Tooth peak changes under force, ensuring a longer life than conventional circular tooth profile teeth.
Feature 4: Have certain conductivity
Feature 5: Operating Temperature Range: -30 to 90℃.
Features of P type domestic high-accuracy circular tooth profile timing belt ■ P type circular tooth profile rubber timing belt (P5M/P8M)
Feature 1: Reasonable semi-circular arc tooth profile design can provide higher torque to adapt to high load transmission.
Feature 2: Special concave tooth peak design, better reducing noise generated by high-speed operation.
Feature 3: Tooth peak changes under force, ensuring greater accuracy than conventional circular tooth profile teeth.
Feature 4: Have certain conductivity
Feature 5: Operating Temperature Range: -25 to 80℃.
Trapezoidal tooth profile timing belt is suitable for light load transmission and driving ■ Trapezoidal tooth profile rubber timing belt (MXL/XL/H/T5/T10)
Feature 1: Suitable for light load transmission, standard torque driving.
Feature 2: Tooth rubber uses chloroprene to protect core wire, providing excellent bending fatigue resistance, heat resistance, oil resistance
Feature 3: Ideal choice of economical and maintenance-free alternative to traditional transmission method.
Feature 4: Have certain conductivity
Feature 5: Operating Temperature Range: -30 to 90℃ (MXL/XL/H) , 0 to 80℃ (T5/T10)

Example of Use
Usage Method Example DrawingInstructions for use of timing wheel and timing belt
The TIMING BELT is installed on the motor and the rotating shaft to transmit the rotational force① Driving (The driven wheel is driven by the driving wheel for transmission)
Transmission belt, used for repeated motion with the object not rotating and high requirements on positioning accuracy② Transmission (Used for repeated motion with the object not rotating and high requirements on positioning accuracy)
Usage Method Example DrawingInstructions for use of timing wheel and timing belt
Plates are conveyed by two timing toothed belts③ Conveyance (Plates are conveyed by two timing toothed belts)
Usage method and example for conveyor belt lifting, repeated positioning motion④ Traction transmission (Workpieces are clamped and transmitted by the belt)

Usage Method
■ Installation method for timing belt transmission
①Turn off the power supply, remove the protective cover, loosen the motor assembly bolts, move the motor so that the belt is loose enough. The belt can be removed without prying. Never try to pry the belt down.
②Remove the old belt and check for abnormal wear. Excessive wear may mean that there are problems in the design or maintenance of the transmission device.
③Choose the right belt to replace.
④To clean the belt and pulley, wipe with a cloth dipped in a small amount of non-volatile liquid. Soaking in detergent or scrubbing the belt with detergent is not advisable. To remove grease, it is also undesirable to wipe with sandpaper or scratch with a sharp object. The belt must be kept dry before installation and use.
⑤Check the pulley for abnormal wear or cracks. If the wear is excessive, the pulley must be replaced.
⑥Check whether the pulley is linearly symmetrical. Linear symmetry of the pulley is essential for the operation of the timing belt, especially the timing belt transmission device.
Asymmetry of the pulley is shown as follows:
 Usage method Installation guide Complete selection Fit installation
⑦Check the remaining transmission device components, such as bearings and bushings, for symmetry, durability, lubrication and other conditions.
⑧Install a new belt on the pulley. Never pry or use too much force.
⑨Tighten to narrow the center distance of the transmission device until the tension tester detects that the belt tension is appropriate. Turn the driving wheel several times with your hands. Re-test tension.
⑩Tighten the assembly bolts of the motor and correct the torque. Since any change in the center distance of the transmission device during operation will result in poor belt performance, it is important to ensure that all transmission components have been tightened.
⑪Start the device and observe the belt performance to see if there is abnormal vibration, and listen carefully if there is abnormal noise. It is best to turn off the machine and check the conditions of the bearing and motor. If it feels too hot to the touch, the belt may be too tight, the bearing may be asymmetrical, or the lubrication may be incorrect.

Precautions
① Do not bend the belt by force.
It is strictly forbidden to bend the belt, which easily causes breakage

Do not use in direct contact with water, solvent, oil, acid, alkali, UV, ozone, etc.
110302717070 Water110302717070 Acid110302717070 Alkali110302717070 Oil110302717070 UV
③ Please avoid using or keeping at extreme high or low temperatures beyond the operating temperature range, or in humid environments.
④ During installation and maintenance, be sure to cut off the power supply and confirm that the machine is completely stopped before proceeding.
⑤ When there may be impurities, be sure to set the guard.
Application Industries
Food Semiconductor Smart phone
110302717070 Lithium battery 110302717070 Semiconductor 110302717070 Smart phone
Automotive Electronic & Electrical Appliances Medical
110302717070 Automotive 110302717070 Electronic & electrical appliances 110302717070 Medical

Related Products
High Torque Timing Pulleys S2M Type Flat Belt (Economy Series) Toothed Timing Belt MXL XL L H Type
TIMING PULLY High torque timing pulley MISUMI brand Pulley manufacturer S2M FLATBELT Flat belt Conveyor belt Transportation belt MISUMI brand Economic type Domestic timing belt Low price Short delivery time
Typical model: HTPA48S2M040-B-N10 Typical model: HBLT350-4.23 Typical model: C-TBN236MXL025

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...

CAD Download

30
45
60
  1. 1
Part Number
C-HTBN1225S5M-250
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipCore Wire Material Belt Width (mm)
(mm) 		Circumference Length
(mm) 		Number of Teeth

SGD 13.86

4 Piece(s)Available 9 Day(s) [Glass Fiber] Glass Fiber251225245

Loading...

  1. 1

Basic Information

Belt Shape Closed End Belt Tooth Surface Standard (Single Sided) Belt Material Rubber Belt
Belt Type S5M Belt Shape Type Round Tooth Profile Super Torque Transmission Torque High Torque Transmission

Please check the type/dimensions/specifications of the part C-HTBN1225S5M-250 in the Timing Belts S5M series.

Configure

Clear All

1 Part Numbers

View Part Numbers

Configure Remaining Specifications
Completed
loading

Specification/Dimensions

  • type

    • C-HTBN□□S5M

    Clear

  • Core Wire Material

    • Glass Fiber
      • Glass Core Wire
      • Glass Fiber

    Clear

  • Belt Width (mm)(mm)

    • 10
    • 15
    • 25

    Clear

  • Circumference Length(mm)

    • 180
    • 225
    • 230
    • 250
    • 255
    • 260
    • 270
    • 275
    • 280
    • 285
    • 295
    • 300
    • 305
    • 320
    • 325
    • 330
    • 335
    • 340
    • 350
    • 355
    • 360
    • 370
    • 375
    • 380
    • 390
    • 395
    • 400
    • 410
    • 415
    • 420
    • 425
    • 435
    • 440
    • 445
    • 450
    • 455
    • 465
    • 475
    • 480
    • 490
    • 500
    • 510
    • 520
    • 525
    • 530
    • 545
    • 550
    • 555
    • 560
    • 565
    • 570
    • 575
    • 590
    • 595
    • 600
    • 615
    • 625
    • 635
    • 640
    • 645
    • 650
    • 655
    • 660
    • 665
    • 670
    • 675
    • 680
    • 690
    • 695
    • 700
    • 710
    • 720
    • 725
    • 730
    • 740
    • 750
    • 765
    • 770
    • 780
    • 800
    • 810
    • 830
    • 835
    • 845
    • 850
    • 860
    • 865
    • 870
    • 880
    • 890
    • 900
    • 905
    • 930
    • 935
    • 940
    • 950
    • 960
    • 975
    • 1000
    • 1025
    • 1050
    • 1085
    • 1100
    • 1115
    • 1120
    • 1125
    • 1135
    • 1145
    • 1160
    • 1175
    • 1195
    • 1200
    • 1225
    • 1250
    • 1270
    • 1295
    • 1350
    • 1420
    • 1475
    • 1500
    • 1530
    • 1550
    • 1595
    • 1615
    • 1680
    • 1690
    • 1715
    • 1800
    • 1945
    • 1960
    • 2000
    • 2350
    • 2525
    • 2765
    • 2800
    • 2980
    • 3380

    Clear

  • Number of Teeth

    • 36
    • 45
    • 46
    • 50
    • 51
    • 52
    • 54
    • 55
    • 56
    • 57
    • 59
    • 60
    • 61
    • 64
    • 65
    • 66
    • 67
    • 68
    • 70
    • 71
    • 72
    • 74
    • 75
    • 76
    • 78
    • 79
    • 80
    • 82
    • 83
    • 84
    • 85
    • 87
    • 88
    • 89
    • 90
    • 91
    • 93
    • 95
    • 96
    • 98
    • 100
    • 102
    • 104
    • 105
    • 106
    • 109
    • 110
    • 111
    • 112
    • 113
    • 114
    • 115
    • 118
    • 119
    • 120
    • 123
    • 125
    • 127
    • 128
    • 129
    • 130
    • 131
    • 132
    • 133
    • 134
    • 135
    • 136
    • 138
    • 139
    • 140
    • 142
    • 144
    • 145
    • 146
    • 148
    • 150
    • 153
    • 154
    • 156
    • 160
    • 162
    • 166
    • 167
    • 169
    • 170
    • 172
    • 173
    • 174
    • 176
    • 178
    • 180
    • 181
    • 186
    • 187
    • 188
    • 190
    • 192
    • 195
    • 200
    • 205
    • 210
    • 217
    • 220
    • 223
    • 224
    • 225
    • 227
    • 229
    • 232
    • 235
    • 239
    • 240
    • 245
    • 250
    • 254
    • 259
    • 270
    • 284
    • 295
    • 300
    • 306
    • 310
    • 319
    • 323
    • 336
    • 338
    • 343
    • 360
    • 389
    • 392
    • 400
    • 470
    • 505
    • 553
    • 560
    • 596
    • 676

    Clear

  • CAD

    • 2D
    • 3D

    Clear

Days to Ship

    • All
    • Same day
    • 5 Day(s) or Less
    • 7 Day(s) or Less
    • 8 Day(s) or Less
    • 9 Day(s) or Less

    Clear

Specify Alterations

Frequently asked question (FAQ)

Question: Why is the order model of the timing belt inconsistent with the actual belt label and engraving?
Answer: Order model is MISUMI product model, the label on the belt or printed model on the belt surface is the belt manufacturer model, which varies with manufacturer, but there will be no influence on the product itself.
Question: The timing belt has been broken after use for a very short period of time. Is there a problem with the quality of the belt?
Answer: The timing belt is a standard product, and the same batch of products have very few individual quality problems, please refer to Main causes of premature breakage and corresponding countermeasures to troubleshoot the equipment in use.
Question: Can alteration be made to the timing belt?
Answer: Alteration cannot be made to the circumference of the timing belt, and partial alteration can be made to the width.
Question: What kind of belt is better to use under conditions that require high cleanliness?
Answer: The use of urethane belts is recommended, which has significantly improved dust drop, compared to the rubber belt.
Question: What are the two main types of timing belts according to their functions? What is the role?
Answer: Timing belts are mainly divided into transmission type and driving type. For transmission type, the load can be placed on the timing belt surface for transmission. For driving type, no load is carried, and only the role of transmitting torque is played, which is similar to the role of chain.
Question: How to judge or measure whether the belt tension meets the installation requirements?
Answer: It is recommended that the customer purchase the tension meter by himself and make a judgment according to the calculation formula of the initial design.
Question: Which tooth type of the timing belt has the smallest clearance? What will it affect?
Answer: The arc tooth type has minimum clearance, which can improve such indicators as positioning accuracy and rigidity.

Check other FAQ (4 items) Hide

Similar Part Numbers

Part Number
C-HTBN1025S5M-100
C-HTBN1025S5M-150
C-HTBN1025S5M-250
C-HTBN1250S5M-100
C-HTBN1250S5M-150
C-HTBN1250S5M-250
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipCore Wire Material Belt Width (mm)
(mm) 		Circumference Length
(mm) 		Number of Teeth

SGD 5.14

4 Piece(s)Available 9 Day(s) [Glass Fiber] Glass Fiber101025205

SGD 7.62

4 Piece(s)Available 9 Day(s) [Glass Fiber] Glass Fiber151025205

SGD 12.60

4 Piece(s)Available 9 Day(s) [Glass Fiber] Glass Fiber251025205

SGD 6.16

1 Piece(s)Available Same day [Glass Fiber] Glass Fiber101250250

SGD 9.15

4 Piece(s)Available 9 Day(s) [Glass Fiber] Glass Fiber151250250

SGD 15.16

4 Piece(s)Available 9 Day(s) [Glass Fiber] Glass Fiber251250250

Tech Support

Technical Inquiry

Payment Method more

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9:00 am – 6:00 pm (Mon – Fri), 9:00 am – 3 pm (Sat)

  • Tel: (65) 6733 7211
  • Fax: (65) 6733 0211
Inquiry
Mobile View

Copyright © MISUMI Corporation All Rights Reserved.