(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

  • Please Note our New Address (effective April 1, 2024): 331 North Bridge Rd, #05-01 Odeon 331, Singapore 188720.

Cam Followers Stainless Steel, Flat, Hex Socket (C-CFMAS5-13)

Cam Followers Stainless Steel, Flat, Hex Socket C-CFMAS5-13

Click this image to zoom it.

Move the mouse over the image to zoom

PDF



Roller Followers Product Overview

Roller Followers Cam bearing is a kind of bearing with shaft, which has its needle roller mounted into the thick-wall outer ring and inner ring, most suitable for the transmission guide rail.
Cam follower is a high-performance bearing with shaft, which has a needle-shaped roller called needle roller mounted inside. The needle roller has the function of improving the rotating capacity and can withstand high-speed rotation. In addition, the outer ring is designed with a thicker wall than ordinary bearings, and can also be used in places subject to impact loads or heavy loads.

Economic type stainless steel cam follower (cylindrical type) Product overview

Roller Followers Product Feature

1. Roller Followers Equipped with a shaft for easy installation!
2. Ideal for places subject to loads!
3. Also suitable for high speed rotation!

Standard Cam Follower Structure
Economic type stainless steel cam follower (cylindrical type) Product features

Roller Guide Mode
The cam follower with cage is suitable for applications with low friction coefficient and high rotation speed, and the full complement roller cam follower is suitable for applications with high rotation speed and heavy load.
Economic type stainless steel cam follower (cylindrical type) Product features

Roller Followers Structure of Sealing Part
For the non-sealed type bearing, the gap between the outer ring and the end rod peripheral ring and between the outer ring and the side plate is small, thus forming a labyrinth. For the sealed type bearing, a sealing gasket is mounted in the shielded type labyrinth, thus preventing intrusion of foreign matter.
Economic type stainless steel cam follower (cylindrical type) Product features

Roller Followers Outer Ring O.D. Shape
The bearing with spherical outer ring can alleviate uneven load caused by installation problems. The contact area between the bearing with arc outer ring and the slide rail surface is large, suitable for slide rail surfaces with large load or low hardness.
Economic type stainless steel cam follower (cylindrical type) Product features

Slide Rail Load Capacity Comparison
Economic type stainless steel cam follower (cylindrical type) Product features

Roller Followers Dimensional Drawing

Economic type stainless steel cam follower (cylindrical type) Dimensional drawing

Economic type stainless steel cam follower (cylindrical type) Dimensional drawing

Economic type stainless steel cam follower (cylindrical type) Dimensional drawing

Roller Followers Specifications Overview

Product Accuracy (μm)

Allowable Tolerance
Economic type stainless steel cam follower (cylindrical type) Specification overview

Allowable Tolerance of Outer Ring and Allowable Value
Economic type stainless steel cam follower (cylindrical type) Specification overview

Roller Followers Example of Use

Economic type stainless steel cam follower (cylindrical type) Example of use Economic type stainless steel cam follower (cylindrical type) Example of use

Roller Followers Moving Direction
Linear Motion
The surface on the matching side must be flat and
the Roller Followers moves in a straight line
Economic type stainless steel cam follower (cylindrical type) Example of use Swing Direction
The surface on the matching side is curved, and
the cam follower moves in a curve
Economic type stainless steel cam follower (cylindrical type) Example of use

Roller Followers Attaching Method
Economic type stainless steel cam follower (cylindrical type) Example of use
Do not use a hammer to directly hit the flange of the cam bearing during installation, otherwise it will cause poor rotation or fracture. Use a hex socket wrench or a slotted screwdriver.
Secure the hexagon socket or screwdriver slot for fixing, and then turn the nut with a wrench to tighten.

Bolt Tightening Torque
Do not exceed the maximum screw tightening torque when installing the cam follower. Otherwise, the threaded portion may be damaged.
Economic type stainless steel cam follower (cylindrical type) Example of use

Roller Followers Precautions

· If the cam follower falls to the ground or is struck hard, it may be damaged.
· Attention should be paid to the fact that impact can cause functional damage, even if it is not visible.
· Cam followers are suitable for radial loads and less suitable for thrust loads, so avoid using methods such as applying thrust loads.
· Some cam followers are not filled with grease due to different sizes.
Please refer to the table below and add proper amount of grease to the products that are not filled with grease before use.

Cam Follower Grease Performance and Service Temperature
Economic type stainless steel cam follower (cylindrical type) Precautions

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
C-CFMAS5-13
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipOuter Dia. D
(Ø)
Width B
(mm)
Basic Load Rating Cr (Dynamic)
(kN)
Basic Load Rating Cor (Static)
(kN)
Allowable Rotational Speed
(rpm)
L Dimension
(mm)

SGD 20.31

1 Piece(s)Available Same day 13917801720023

Loading...

  1. 1

Basic Information

Product Category Cam Followers Roller Type Cylindrical Outer Ring Tightening Method Hex Socket on Head
Size Standards Metric System Material Detail SUS440

Please check the type/dimensions/specifications of the part C-CFMAS5-13 in the Cam Followers Stainless Steel, Flat, Hex Socket series.

Frequently asked question (FAQ)

Question: Mounting Method
Answer: Do not use a hammer to directly hit the flange of the cam bearing during installation, otherwise it will cause poor rotation or fracture. Fix the inner hexagon or screwdriver slot with a hex socket wrench or a slotted screwdriver, and then turn the nut with a wrench to tighten. Do not exceed the maximum screw tightening torque when installing the cam follower. Otherwise, the threaded portion may be damaged.
Question: Applicable load of cam follower
Answer: It is applicable to radial load, but not very applicable to thrust load, so avoid using methods such as applying thrust load.
Question: Usage difference of different O.D. shapes of outer ring
Answer: The bearing with spherical outer ring can alleviate uneven load caused by installation problems. The contact area between the bearing with arc outer ring and the slide rail surface is large, suitable for slide rail surfaces with large load or low hardness.

Similar Part Numbers

Part Number
C-CFMAS12-30
C-CFMAS12-32
C-CFMAS16-35
C-CFMAS18-40
C-CFMAS6-16
C-CFMAS8-19
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipOuter Dia. D
(Ø)
Width B
(mm)
Basic Load Rating Cr (Dynamic)
(kN)
Basic Load Rating Cor (Static)
(kN)
Allowable Rotational Speed
(rpm)
L Dimension
(mm)

SGD 23.87

1 Piece(s)Available 10 Day(s) 30144.633.753430040

SGD 26.04

1 Piece(s)Available 10 Day(s) 32144.83.981410040

SGD 40.69

1 Piece(s)Available Same day 35185.15.01370052

SGD 46.03

1 Piece(s)Available 34 Day(s) 40205.45.21350058

SGD 19.09

1 Piece(s)Available Same day 16111.239201530028

SGD 20.31

1 Piece(s)Available Same day 19111.8916201100032

Tech Support