Leveling Mounts Bottom Flat With Rubber
Brand :
MISUMI
Caution
Product Description
- Economy series Leveling Mounts Bottom Flat with Rubber.
- Type: Adjusting Bolt with Rubber Foot.
- The part number is C-CFJGN.
- Body Material: Q235 Carbon Steel.
- Body Surface Treatment: Zinc Plating solution.
- Bottom Pads Part: Rubber.
- Nominal of Thread size (M): 8, 10, 12, 16 and 20.
- Thread Length size: 60, 80, 100, 120, 150 and 200 mm.
- Screw is smooth and can be manually for assembly.
- This is an economy series; The price is cheaper than the MISUMI standard product.
Note: The below material information is for VIETNAM only:
![Note: The below material information is for VIETNAM only:]()
Economy Flat Rubber Mount
Flat bottomZinc platingLeveling
- High-quality Q235 carbon steel construction
- Durable synthetic rubber bottom pad
- Zinc plating for corrosion resistance
- Screw with various thread size options
- Ideal for leveling and stabilizing heavy equipment
MISUMI Standard
Cheaper Price
Product Variety
3D CAD Support
Adjuster Product Overview
Economy series Adjuster Flat bottom type with glue
An adjuster with high quality, cheap price and excellent cost performance
An adjuster with high quality, cheap price and excellent cost performance
Adjuster Product Feature
【Adjuster Features】
No height adjustment knob.
【Material Table】
No height adjustment knob.
【Material Table】
| Type | A Body | B Glue Part | |
 Material |  Surface Treatment | Material | |
| C-CFJGN | Q235 | Zinc Plating | Rubber |
Note: The below material information is for VIETNAM only:
Adjuster Usage Method
Recommended adjuster mounting method
On the premise of ensuring safety, raise the equipment with a forklift (light equipment can roll the equipment sideways) to a height that is convenient to screw into the inner teeth.
Screw in the adjuster through threads. After assembling the required number of adjusters, lower the forklift and adjust horizontally.
Adjuster Precautions
1. Check whether the screw can be mounted with female thread (it is recommended to re-tap after coating the threads).
2. The selection adjuster should be screwed in more than half of the thread as far as possible (the shorter thread screwed in, the greater the bearing capacity).
3. For heavy equipment, it is recommended to add lubricating grease to threads for easy adjustment.
On the premise of ensuring safety, raise the equipment with a forklift (light equipment can roll the equipment sideways) to a height that is convenient to screw into the inner teeth.
Screw in the adjuster through threads. After assembling the required number of adjusters, lower the forklift and adjust horizontally.
Adjuster Precautions
1. Check whether the screw can be mounted with female thread (it is recommended to re-tap after coating the threads).
2. The selection adjuster should be screwed in more than half of the thread as far as possible (the shorter thread screwed in, the greater the bearing capacity).
3. For heavy equipment, it is recommended to add lubricating grease to threads for easy adjustment.
Example of Use Adjuster
