(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

Support Units for Ball Screw, Support Side Round Type

Support Units for Ball Screw, Support Side Round Type

Click this image to zoom it.

Move the mouse over the image to zoom

Product Overview of Support Units

1. Special Support Units for C7 to C10 rolled screw ball without pre-pressure.
2. This product connects the support side (no motor connected) of the ball screw.
3. The product is composed of bearing holders, bearings, and buckles.

Product photo

Product Feature of Support Units

1. The product of Support Units is used in combination with the rolled ball screw to achieve better effect and cost-effective.
2. The product has optional combination models (fixed side+support side) for simpler selection.

Dimensional Drawing of Support Units

Dimension drawing of Support Units (unit: mm)
Dimension 1

[Applicable Ball Screw Table of Support Units]
The following table only lists some ball screws. The product can also be applied to other brands of C7 to C10 rolled ball screws.
The □□ in the table below represents the lead of the ball screw; Example: C-TBSE0802
Support UnitsBall Screw
Fixed side modelSupport side modelCombination modelMISUMITHK
(MISUMI process)
C-TFK6C-TFF6C-TFK6-SETC-TBSE08□□
C-BSST08□□
C-BSSC08□□
MTF1002 
C-TFK8SC-TFK8S-SETC-TBSE10□□
C-BSST10□□
C-BSSC10□□
-
C-TFK8C-TFK8-SETC-TBSE10□□MTF1202
BTK1208
C-TFK10SC-TFF10C-TFK10S-SETC-TBSE12□□
C-BSSTH12□□
C-BSSCH12□□
-
C-TFK10C-TFK10-SETC-TBSE12□□BTK14□□
BLK1510
WTF1520
C-TFK12C-TFF12C-TFK12-SETC-TBSE15□□
C-BSSTH15□□
C-BSSCH15□□
BLK1616
BTK1808
C-TFK15C-TFF15C-TFK15-SETC-TBSE20□□
C-BSSTH20□□
C-BSSCH20□□
BTK2010
BTK25□□
C-TFK20C-TFF20C-TFK20-SETC-TBSE25□□
C-BSSTH25□□
C-BSSCH25□□
-
C-TFK25C-TFF25C-TFK25-SETC-TBSE32□□
C-BSSTH32□□
C-BSSCH32□□
-
     

Usage Method of Support Units

Usage Method 1

Usage Method 2

Precautions of Support Units

Precaution 1

Precaution 2

Precaution 3

Example Use of Support Units

Sheet Forming Machine
Example of Use 1

Specification Table of Support Units

Bearing, Support Units
No.
Allowable Axial Load (N)Basic Dynamic Rated Load (N)
67201880
810103090
1019104260
1221204660
1523505320
20578012490
25697014140

Specification Table
Bearing
No.
Allowable Axial Load (N)Basic Dynamic Rated Load (N)
67201880
810103090
1019104260
1221204660
1523505320
20578012490
25697014140

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
C-TFF6
C-TFF10
C-TFF12
C-TFF15
C-TFF20
C-TFF25
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipShaft Dia. d
(Ø)
Total Length L
(mm)
P.C.D
(mm)
Flange Width B
(mm)
Outer Dia. D
(mm)

SGD 7.48

1 Piece(s)Available 5 Day(s) 610282822

SGD 7.16

1 Piece(s)Available Same day 812353528

SGD 7.26

1 Piece(s)Available Same day 1015424234

SGD 9.44

1 Piece(s)Available Same day 1517505240

SGD 17.84

1 Piece(s)Available 5 Day(s) 2020706857

SGD 24.44

1 Piece(s)Available Same day 2524807963

Loading...

  1. 1

Basic Information

Type Support Side Shape Round Type Surface Treatment Black Oxide
Material S45C Type Single Product Surface Treatment Ferroferric oxide protective film (Black Oxide)

Frequently asked question (FAQ)

Question: What does "applicable shaft diameter of oil seal" mean?
Answer: The support unit purchased from MISUMI already includes the collar. The collar and the oil seal in the support have been matched, and it can be ignored as long as it is matched with MISUMI ball screw on sale according to the "Ball Screw Applicability Table". However, if it is matched with the ball screw purchased from other companies, please select the type according to shape and size of the shaft end of the screw.
Question: What should I do if the accessories in the support unit are lost or damaged?
Answer: All kinds of accessories can be sold separately, please select according to the MISUMI catalog
Question: Square type support units are divided into standard type and narrow pitch type, what is the difference?
Answer: In the case of limited pitch space, please use the narrow pitch type, but be sure to choose according to the shaft end size of the ball screw. For example: please use standard type (C-TEK) support unit for C-TBSE type ball screw and narrow pitch type (C-TBK) for C-TBSB type ball screw.

Tech Support