(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

Aluminum Hinges Tapered Hole Type

Aluminum Hinges Tapered Hole Type

Click this image to zoom it.

Move the mouse over the image to zoom

  • 110310364679
  • 110310364679
  • 110310364679
  • 110310364679
  • 110310364679
  • 110310364679

Product Overview of Flat Hinges

Economy series aluminum butterfly Flat Hinges with countersunk holes.The products in this series are aluminum butterfly Flat Hinges with countersunk holes, with surface clear anodizing and black anodizing available for selection based on the actual needs.
Note: Among Flat Hinges with the same dimensions and specifications in this series, there are small aluminum ones with higher loads available for selection. For details, refer to the relevant products

Usage Method of Flat Hinges

According to the weight of the door body where the Flat Hinges is mounted, the load-carrying capacity of the hinge can be calculated.
Determine the utilization direction first, and calculate according to the length and width of the door body
 
Utilization Method of Flat HingesLengthwise UtilizationLateral Utilization
A=2XBA≠2XB-
Lengthwise Utilization 1Lengthwise Utilization 2Lateral Utilization 1
Allowable Load Calculation FormulaAllowable Load =WAllowable Load =W(B/A)*2Allowable Load =W

Specifications Overview of Flat Hinges

Product Material and Surface Treatment Overview of Flat Hinges:
TYPEFlat Hinges Material MaterialFlat Hinges Surface Treatment Surface Treatment
C-HHFLA6063-T5
Bushing: Polyacetal
Alumite Treatment
C-HHBFL

Example Use of Flat Hinges

Depending on the profile to be fixed, the selectable Flat Hinges specifications can be determined by the allowable load weight.For details, refer to the following table for the applicable hinge model.

Flat Hinges common combinations of aluminum profiles can be confirmed and found from the table below.
Recommended Combinations of Aluminum Profile
 
Representative Dimensional DrawingType of Matching ProfileSuitable Profile* Allowable LoadProduct ModelSurface TreatmentMounting Pitch S
mm
KGN
Dimensional DrawingProfile of the Same Size on Two Sides

Similarity Comparison
Link 20/20 Profile878C-HHFL5Clear Anodized21
C-HHBFL5Black Anodized
1098HHPSN5Clear Anodized
HHPBSN5Black Anodized
20196C-HHDL5Clear Anodized
C-HHBDL5Black Anodized
Link 30/30 Profile878C-HHFL6Clear Anodized32
C-HHBFL6Black Anodized
1098HHPSN6Clear Anodized
HHPBSN6Black Anodized
20196C-HHDL6Clear Anodized
C-HHBDL6Black Anodized
Link 40/40 Profile878C-HHFL8Clear Anodized42
C-HHBFL8Black Anodized
1098HHPSN8Clear Anodized
HHPBSN8Black Anodized
20196C-HHDL8Clear Anodized
C-HHBDL8Black Anodized
Link 45/45 Profile12118C-HHFL8-45Clear Anodized47
C-HHBFL8-45Black Anodized
15147HHPSN8-45Clear Anodized
HHPBSN8-45Black Anodized
30294C-HHDL8-45Clear Anodized
C-HHBDL8-45Black Anodized
Profile with Different Sizes on Two Sides

Difference Comparison
Link 20/30 Profile878C-HHFLS6-5Clear Anodized26.5
1098HHPSF6-5
20196C-HHDLS6-5
Link 30/40 Profile878C-HHFLS8-531.5
1098HHPSF8-5
20196C-HHDLS8-5
Link 20/45 Profile878C-HHFLS845-534
1098HHPSF845-5
20196C-HHDLS845-5
Link 20/40 Profile12118C-HHFLS8-637
15147HHPSF8-6
30294C-HHDLS8-6
Link 30/45 Profile12118C-HHFLS845-639
15147HHPSF845-6
30294C-HHDLS845-6

Precautions of Flat Hinges

To install the hinge on the panel, etc., it is recommended to choose the nut for the butterfly Flat Hinges. For details, you can search TYPE: HHPNT or HHPFNT in the website to choose according to the size requirements.

Dimensional Drawing of Flat Hinges

Economic type aluminum butterfly hinge Dimensional drawing

Refer to the Specification Table below for detailed product dimensions

Specification Table of Flat Hinges

Part Number* Allowable LoadWeight
g
LWKPJSNTER
TypeNo.kgNThrough HoleCounterbored Hole
C-HHFL
Clear Anodized

C-HHBFL
Black Anodized
5878244735.411257.2215.5113.55.55
630488.5308326.51365.5
850636213371042
8-45121187280104316.5474.5
5878244735.411257.2215.5113.55.55
630488.5308326.51365.5
850636213371042
8-45121187280104316.5474.5
* The allowable load is the value when 2 pieces are used.

Dimensional Drawing

Economic type aluminum butterfly hinge Dimensional drawing

Refer to the Specification Table below for detailed product dimensions

Specification Table
Part Number* Allowable LoadWeight
g
LWKPJSNTER
TypeNo.kgNThrough HoleCounterbored Hole
C-HHFL
Clear Anodized

C-HHBFL
Black Anodized
5878244735.411257.2215.5113.55.55
630488.5308326.51365.5
850636213371042
8-45121187280104316.5474.5
5878244735.411257.2215.5113.55.55
630488.5308326.51365.5
850636213371042
8-45121187280104316.5474.5
* The allowable load is the value when 2 pieces are used.

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
C-HHBFL5
C-HHBFL5-2
C-HHBFL5-3
C-HHBFL6
C-HHBFL6-2
C-HHBFL6-3
C-HHBFL8
C-HHBFL8-2
C-HHBFL8-3
C-HHBFL8-45
C-HHFL5
C-HHFL5-2
C-HHFL5-3
C-HHFL6
C-HHFL6-2
C-HHFL6-3
C-HHFL8
C-HHFL8-2
C-HHFL8-3
C-HHFL8-45
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipLength
(mm)
Allowable Load
(N)
Main Body Surface Treatment Width (W)
(mm)
Mounting Pitch S
(mm)

SGD 2.84

1 Piece(s)Available Same day 4778[Anodize] Black Anodizing Treatment35.421

SGD 2.77

1 Piece(s)Available Same day 4778[Anodize] Black Anodizing Treatment35.421

SGD 5.53

4 Piece(s)Available 5 Day(s) 66147[Anodize] Black Anodizing Treatment35.421

SGD 3.10

1 Piece(s)Available Same day 4778[Anodize] Black Anodizing Treatment4832

SGD 3.04

1 Piece(s)Available Same day 4778[Anodize] Black Anodizing Treatment4832

SGD 5.87

1 Piece(s)Available Same day 78147[Anodize] Black Anodizing Treatment4832

SGD 3.40

1 Piece(s)Available Same day 6378[Anodize] Black Anodizing Treatment6242

SGD 3.31

1 Piece(s)Available Same day 6378[Anodize] Black Anodizing Treatment6242

SGD 7.23

1 Piece(s)Available Same day 113147[Anodize] Black Anodizing Treatment6242

SGD 3.74

1 Piece(s)Available Same day 63118[Anodize] Black Anodizing Treatment8047

SGD 2.66

1 Piece(s)Available Same day 4778[Anodize] Natural Color Anodizing Treatment35.421

SGD 2.59

1 Piece(s)Available Same day 4778[Anodize] Natural Color Anodizing Treatment35.421

SGD 5.27

4 Piece(s)Available 5 Day(s) 66147[Anodize] Natural Color Anodizing Treatment35.421

SGD 2.92

1 Piece(s)Available Same day 4778[Anodize] Natural Color Anodizing Treatment4832

SGD 2.86

1 Piece(s)Available Same day 4778[Anodize] Natural Color Anodizing Treatment4832

SGD 5.60

1 Piece(s)Available Same day 78147[Anodize] Natural Color Anodizing Treatment4832

SGD 3.16

1 Piece(s)Available Same day 6378[Anodize] Natural Color Anodizing Treatment6242

SGD 3.08

1 Piece(s)Available Same day 6378[Anodize] Natural Color Anodizing Treatment6242

SGD 6.96

4 Piece(s)Available 5 Day(s) 113147[Anodize] Natural Color Anodizing Treatment6242

SGD 3.82

1 Piece(s)Available Same day 63118[Anodize] Natural Color Anodizing Treatment8047

Loading...

  1. 1

Basic Information

Main Body Type Standard Flat Hinge Type Square Plate Type Operating Environment Standard
Body Material A6063 Additional Function Not Provided Mounting Method Screw Mounting
Mounting Screw Hole Type Cone

Frequently asked question (FAQ)

Question: What are the differences between standard-shaped and special-shaped hole products, and how to distinguish them in use?
Answer: Standard-shaped products are those with the same opening sizes on the left and right pages, while the special-shaped hole is the structure with different opening sizes on the left and right pages, one large and one small. The purpose of the special-shaped hole structure is to flexibly use when connecting aluminum profiles of different sizes. For detailed description, refer to examples of use.
Question: Are the nuts for butterfly hinge mentioned in the Precautions necessarily required?
Answer: When installed on aluminum profiles, the recommended nuts are not necessarily required and separate small nuts can be used for fixing. However, the nuts are required as fixing parts for support when installed on panels, because generally panels are relatively thin and screws cannot be used for locking and fixing.

Tech Support