(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

  • Please Note our New Address (effective April 1, 2024): 331 North Bridge Rd, #05-01 Odeon 331, Singapore 188720.

Nylon Coated Cam Followers (C-CFFRUCS5-13)

Nylon Coated Cam Followers C-CFFRUCS5-13

Click this image to zoom it.

Move the mouse over the image to zoom

  • Nylon Coated Cam Followers C-CFFRUCS5-13
  • Nylon Coated Cam Followers C-CFFRUCS5-13
  • Nylon Coated Cam Followers C-CFFRUCS5-13
  • Nylon Coated Cam Followers C-CFFRUCS5-13
  • Volume Discount

(i)Caution

  • Products with d ≥ 10 are being gradually switched over to specifications with through holes in the L dimension. Please take this into account prior to purchasing.

PDF



Roller Followers Product Overview

The Roller Followers coated with resin material has a certain elasticity. When used as a conveying roller, the elastic sleeve can protect devices that come into contact with the sleeve during high-speed rotation, so it is particularly suitable for conveying fragile devices (such as semiconductors and LCD devices); and resin material is superior in corrosion resistance and wear resistance compared with metal, and when the cam follower is used as a guide roller to substitute a bearing, resin material is more wear-resistant than metal material, and its service life is longer. When the mating side is a curved surface, the contact frictional force between the surface of the resin material and the curved surface is greater, thus allowing the cam follower to swing with respect to the curved surface more stably without sliding. For example, sleeves made of nylon and urethane materials, compared with those made of traditional resin material, have greatly improved hardness while retaining the original excellent properties of elasticity, wear resistance, etc., thereby substituting traditional all-metal cam followers to a certain extent to carry out higher precision operations.

Roller Followers Product Feature

MISUMI's new product with greatly improved performance
1. MISUMI's embedded "Grooving" Roller Followers technology (patent pending). The traditional processing method is changed, and the problem that the resin outer ring is easy to fall off under the conditions of heavy load, partial load and high rotating speed is solved.
2. The test results of multi-angle load running simulation show that the degumming performance of the product is improved by more than 7 times compared with that of similar existing products. (*MISUMI test equipment)

Test Method
Nylon coated cam follower Hex socket on head product features
Try to make the inclination of the cam follower with resin as zero as possible.

【Roller Followers Material Features】
ItemUrethaneMC Nylon
Load Resistant
Abrasion Resistant
Mechanical Strength
Heat Resistance×
Chemical-Resistant×

Roller Followers Dimensional Drawing

Roller Followers TypeRoller Followers MaterialRoller Followers Accessories
With sealResinCam follower
C-CFFRUCSNylonSUJ21 hexagon socket nut (S45C·ferroferric oxide protective film)
 
■Hex socket on head (d5 to 8)
Nylon coated cam follower hex socket on head dimensional drawing
Operating environment at ambient temperature below 80 ℃.
No grease replenishing hole is provided for d16 and below.
■ Hex Socket on Head Thread (d10~20)
Nylon coated cam follower hex socket on head dimensional drawing
Roller Followers Typedh7 ToleranceD SelectionM×PitchBB1LAllowable Load (N)Allowable Rotational Speed (RPM)
C-CFFRUCS3103×0.578172383200
4124×0.789203502760
5135×0.8910234062510
6166×1.01112284602230
8198×1.25325041960
102210×1.01213365551760
2610×1.05921560
123012×1.51415407281390
3212×1.57791320
163516×1.51819.5528401230
184018×1.52021.5588861080
205220×1.52425.5661044830
Allowable load is the value when the speed is 10 km/h.
kgf=N×0.101972

Roller Followers Usage Method

■ Types of Cam Followers
Roller Followers Intended UseNoise Proof Transmission
FEATURESNylon Coated TypeUrethane Coated Type
Product DescriptionNylon coated cam follower Hex socket on head product overviewNylon coated cam follower Hex socket on head product overview
Type with resin press-fit into cam follower. Resin absorbs the impact of the matching side and plays a role in suppressing noise during rotation.Type with urethane sintered on cam follower. Urethane absorbs the impact of the matching side and plays a role in suppressing noise during rotation.

Roller Followers Example of Use

Nylon coated cam follower Hex socket on head example of use

Roller Followers Do not use a hammer to directly hit the flange of the cam bearing during installation, otherwise it will cause poor rotation or fracture. Fix the inner hexagon with a hex socket wrench, then turn the nut with a wrench to tighten.

Bolt Tightening Torque
Do not exceed the maximum screw tightening torque when installing the cam follower. Otherwise, the threaded portion may be damaged.
dh7Maximum tightening torque N·m
30.392
40.98
51.96
62.94
87.84
1016.7
1229.4
1670.6
1898
20137
24245

Roller Followers Precautions

· If the Roller Followers falls to the ground or is struck hard, it may be damaged.
· Attention should be paid to the fact that impact can cause functional damage, even if it is not visible.
· Cam followers are suitable for radial loads and less suitable for thrust loads, so avoid using methods such as applying thrust loads.
· Try to make the inclination of the cam follower with resin as zero as possible.
Roller Followers Specification Table
Roller Followers Typedh7 ToleranceD SelectionM x pitchBB1LAllowable Load (N)Allowable Rotational Speed (RPM)
C-CFFRUCS3103×0.578172383200
4124×0.789203502760
5135×0.8910234062510
6166×1.01112284602230
8198×1.25325041960
102210×1.01213365551760
2610×1.05921560
123012×1.51415407281390
3212×1.57791320
163516×1.51819.5528401230
184018×1.52021.5588861080
205220×1.52425.5661044830
Allowable load is the value when the speed is 10 km/h.
kgf=N×0.101972

Roller Followers Dimensional Drawing

Roller Followers Type Material Accessories
With sealUrethaneCam follower
C-CFFRUCSNylonSUJ21 hexagon socket nut (S45C ferroferric oxide protective film)
 
■Hex socket on head (d5 to 8)
Nylon coated cam follower hex socket on head dimensional drawing
Operating environment at ambient temperature below 80 ℃.
No grease replenishing hole is provided for d16 and below.
■ Hex Socket on Head Thread (d10~20)
Nylon coated cam follower hex socket on head dimensional drawing
Specification Table
Typedh7 ToleranceD SelectionM x pitchBB1LAllowable Load (N)Allowable Rotational Speed (RPM)
C-CFFRUCS3103×0.578172383200
4124×0.789203502760
5135×0.8910234062510
6166×1.01112284602230
8198×1.25325041960
102210×1.01213365551760
2610×1.05921560
123012×1.51415407281390
3212×1.57791320
163516×1.51819.5528401230
184018×1.52021.5588861080
205220×1.52425.5661044830
Allowable load is the value when the speed is 10 km/h.
kgf=N×0.101972

Dimensional Drawing
Type Material Accessories
With sealUrethaneCam follower
C-CFFRUCSNylonSUJ21 hexagon socket nut (S45C ferroferric oxide protective film)
 
■Hex socket on head (d5 to 8)
Nylon coated cam follower hex socket on head dimensional drawing
Operating environment at ambient temperature below 80 ℃.
No grease replenishing hole is provided for d16 and below.
■ Hex Socket on Head Thread (d10~20)
Nylon coated cam follower hex socket on head dimensional drawing

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
C-CFFRUCS5-13
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipOuter Dia. D
(Ø)
Width B
(mm)
Tightening Method Allowable Rotational Speed
(rpm)
Allowable Load
(N)
L Dimension
(mm)
Stud Screw Nominal Thread (M)
(mm)

SGD 26.71

1 Piece(s)Available Same day 139Hex Socket on Head2510254235×0.8

Loading...

  1. 1

Basic Information

Product Category Cam Followers Roller Type Cylindrical Outer Ring Cam Follower Type Plastic
Size Standards Metric System Shaft Provided Roller Guiding Method With Retainer
Seal Provided Application Rolling Transmission Shock Absorber Cam Follower Type Flat Type

Please check the type/dimensions/specifications of the part C-CFFRUCS5-13 in the Nylon Coated Cam Followers series.

Frequently asked question (FAQ)

Question: Mounting Method
Answer: Do not use a hammer to directly hit the flange of the cam bearing during installation, otherwise it will cause poor rotation or fracture. Fix the inner hexagon with a hex socket wrench, then turn the nut with a wrench to tighten. Do not exceed the maximum screw tightening torque when installing the cam follower. Otherwise, the threaded portion may be damaged.
Question: Applicable load of cam follower
Answer: It is applicable to radial load, but not very applicable to thrust load, so avoid using methods such as applying thrust load.
Question: Usage difference of different O.D. shapes of outer ring
Answer: The bearing with spherical outer ring can alleviate uneven load caused by installation problems. The contact area between the bearing with arc outer ring and the slide rail surface is large, suitable for slide rail surfaces with large load or low hardness.

Similar Part Numbers

Part Number
C-CFFRUCS12-30
C-CFFRUCS12-32
C-CFFRUCS16-35
C-CFFRUCS18-40
C-CFFRUCS6-16
C-CFFRUCS8-19
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipOuter Dia. D
(Ø)
Width B
(mm)
Tightening Method Allowable Rotational Speed
(rpm)
Allowable Load
(N)
L Dimension
(mm)
Stud Screw Nominal Thread (M)
(mm)

SGD 29.07

1 Piece(s)Available Same day 3014Hex Socket on Head Thread13904554012×1.5

SGD 31.29

1 Piece(s)Available 5 Day(s) 3214Hex Socket on Head Thread13204874012×1.5

SGD 37.38

1 Piece(s)Available Same day 3518Hex Socket on Head Thread12305255216×1.5

SGD 41.13

1 Piece(s)Available Same day 4020Hex Socket on Head Thread10805545818×1.5

SGD 25.42

1 Piece(s)Available Same day 1611Hex Socket on Head2230288286×1.0

SGD 25.44

1 Piece(s)Available Same day 1911Hex Socket on Head1960315328×1.25

Tech Support