Urethane Coated Cam Followers
Brand :
MISUMI
Caution
- Products with d ≥ 10 are being gradually switched over to specifications with through holes in the L dimension. Please take this into account prior to purchasing.
Product Description
This is an economy item, The price is cheaper than the MISUMI standard product.
Roller Followers Allowable load is the value when the speed is 10 km/h.
kgf＝N×0.101972
Roller Followers Do not use a hammer to directly hit the flange of the cam bearing during installation, otherwise it will cause poor rotation or fracture. Fix the inner hexagon with a hex socket wrench, then turn the nut with a wrench to tighten.
Bolt Tightening Torque
Do not exceed the maximum screw tightening torque when installing the cam follower. Otherwise, the threaded portion may be damaged.
Allowable load is the value when the speed is 10 km/h.
kgf＝N×0.101972
Economy Urethane Coated Cam Followers
Noise Reduction High Load Capacity Enhanced Wear Resistance
- Coated with high-quality urethane (Shore A90) for superior durability. This coating enhances impact absorption and reduces friction, extending the lifespan of the cam follower in demanding applications.
- Designed to handle significant radial loads. Allows up to specified maximum allowable load depending on size.
- Urethane coating offers excellent wear resistance compared to metal cam followers. The urethane material helps in maintaining performance even under high-frequency use.
- Roller bearing with multiple size options
- Effective in reducing noise during operation. The urethane coating helps in dampening noise, making it ideal for environments where noise control is crucial.
MISUMI Standard
Cheaper Price
Product Variety
3D CAD Support
Roller Followers Product Overview
The Roller Followers coated with resin material has certain elasticity. When used as a conveying roller, the elastic sleeve can protect devices that come into contact with the sleeve during high-speed rotation, so it is particularly suitable for conveying fragile devices (such as semiconductors and LCD devices); and resin material is superior in corrosion resistance and wear resistance compared with metal, and when the cam follower is used as a guide roller to substitute a bearing, resin material is more wear-resistant than metal material, and its service life is longer. When the mating side is a curved surface, the contact frictional force between the surface of the resin material and the curved surface is greater, thus allowing the cam follower to swing with respect to the curved surface more stably without sliding. For example, sleeves made of nylon and urethane materials, compared with those made of traditional resin material, have greatly improved hardness while retaining the original excellent properties of elasticity, wear resistance, etc., thereby substituting traditional all-metal cam followers to a certain extent to carry out higher precision operations.
Roller Followers Product Feature
MISUMI's new Roller Followers product with greatly improved performance
1. MISUMI's embedded "Grooving" cam follower technology (patent pending). The traditional processing method is changed, and the problem that the resin outer ring is easy to fall off under the conditions of heavy load, partial load and high rotating speed is solved.
2. The test results of multi-angle load running simulation show that the degumming performance of the product is improved by more than 7 times compared with that of similar existing products. (*MISUMI test equipment)
Roller Followers Test Method
Try to make the inclination of the cam follower with resin as zero as possible.
【Roller Followers Material Features】
1. MISUMI's embedded "Grooving" cam follower technology (patent pending). The traditional processing method is changed, and the problem that the resin outer ring is easy to fall off under the conditions of heavy load, partial load and high rotating speed is solved.
2. The test results of multi-angle load running simulation show that the degumming performance of the product is improved by more than 7 times compared with that of similar existing products. (*MISUMI test equipment)
Roller Followers Test Method
Try to make the inclination of the cam follower with resin as zero as possible.【Roller Followers Material Features】
| Item | Urethane | MC Nylon |
| Load Resistant | △ | ○ |
| Abrasion Resistant | ○ | △ |
| Mechanical Strength | ○ | ◎ |
| Heat Resistance | × | △ |
| Chemical-Resistant | × | ○ |
Roller Followers Dimensional Drawing
| Roller Followers Type |  Roller Followers Material |  Roller Followers Accessories | |
| With seal | Urethane | Cam follower | |
| C－CFFRUA | Shore A90 | SUJ2 | 1 hexagon socket nut (S45C·ferroferric oxide protective film) |
■Hex socket on head (d5 to 8)
Operating environment at ambient temperature below 80 ℃ (reference).
No grease replenishing hole is provided for d16 and below.
Operating environment at ambient temperature below 80 ℃ (reference).No grease replenishing hole is provided for d16 and below.■ Hex Socket on Head Thread (d10~20)
 Roller Followers Type |  dh7 Tolerance |  D Selection | M×Pitch | B | B1 | L | Allowable Load (N) | Allowable Rotational Speed (RPM) |
| C－CFFRUA | 3 | 10 | 3×0.5 | 7 | 8 | 17 | 46 | 1560 |
| 4 | 12 | 4×0.7 | 8 | 9 | 20 | 63 | 1520 | |
| 5 | 13 | 5×0.8 | 9 | 10 | 23 | 75 | 1500 | |
| 6 | 16 | 6×1.0 | 11 | 12 | 28 | 99 | 1300 | |
| 8 | 19 | 8×1.25 | 32 | 106 | 1180 | |||
| 10 | 22 | 10×1.0 | 12 | 13 | 36 | 121 | 1060 | |
| 26 | 10×1.0 | 130 | 930 | |||||
| 12 | 30 | 12×1.5 | 14 | 15 | 40 | 162 | 830 | |
| 32 | 12×1.5 | 166 | 800 | |||||
| 16 | 35 | 16×1.5 | 18 | 19.5 | 52 | 222 | 740 | |
| 18 | 40 | 18×1.5 | 20 | 21.5 | 58 | 270 | 673 | |
| 20 | 52 | 20×1.5 | 24 | 25.5 | 66 | 312 | 524 |
Roller Followers Allowable load is the value when the speed is 10 km/h.kgf＝N×0.101972Roller Followers Usage Method
■ Types of Cam Followers
| Roller Followers Intended Use | Noise Proof Transmission | |
| FEATURES | Nylon Coated Type | Urethane Coated Type |
| Product Description |  |  |
| Type with resin press-fit into cam follower. Resin absorbs the impact of the matching side and plays a role in suppressing noise during rotation. | Type with urethane sintered on cam follower. Urethane absorbs the impact of the matching side and plays a role in suppressing noise during rotation. | |
Roller Followers Example of Use
Roller Followers Do not use a hammer to directly hit the flange of the cam bearing during installation, otherwise it will cause poor rotation or fracture. Fix the inner hexagon with a hex socket wrench, then turn the nut with a wrench to tighten.
Bolt Tightening Torque
Do not exceed the maximum screw tightening torque when installing the cam follower. Otherwise, the threaded portion may be damaged.
| dh7 | Maximum tightening torque N·m |
| 3 | 0.392 |
| 4 | 0.98 |
| 5 | 1.96 |
| 6 | 2.94 |
| 8 | 7.84 |
| 10 | 16.7 |
| 12 | 29.4 |
| 16 | 70.6 |
| 18 | 98 |
| 20 | 137 |
| 24 | 245 |
Roller Followers Precautions
· If the cam follower falls to the ground or is struck hard, it may be damaged.
· Attention should be paid to the fact that impact can cause functional damage, even if it is not visible.
· Cam followers are suitable for radial loads and less suitable for thrust loads, so avoid using methods such as applying thrust loads.
· Try to make the inclination of the cam follower with resin as zero as possible.
Roller Followers Specification Table· Attention should be paid to the fact that impact can cause functional damage, even if it is not visible.
· Cam followers are suitable for radial loads and less suitable for thrust loads, so avoid using methods such as applying thrust loads.
· Try to make the inclination of the cam follower with resin as zero as possible.
| Type | dh7 Tolerance | D Selection | M x pitch | B | B1 | L | Allowable Load (N) | Allowable Rotational Speed (RPM) |
| C－CFFRUA | 3 | 10 | 3×0.5 | 7 | 8 | 17 | 46 | 1560 |
| 4 | 12 | 4×0.7 | 8 | 9 | 20 | 63 | 1520 | |
| 5 | 13 | 5×0.8 | 9 | 10 | 23 | 75 | 1500 | |
| 6 | 16 | 6×1.0 | 11 | 12 | 28 | 99 | 1300 | |
| 8 | 19 | 8×1.25 | 32 | 106 | 1180 | |||
| 10 | 22 | 10×1.0 | 12 | 13 | 36 | 121 | 1060 | |
| 26 | 10×1.0 | 130 | 930 | |||||
| 12 | 30 | 12×1.5 | 14 | 15 | 40 | 162 | 830 | |
| 32 | 12×1.5 | 166 | 800 | |||||
| 16 | 35 | 16×1.5 | 18 | 19.5 | 52 | 222 | 740 | |
| 18 | 40 | 18×1.5 | 20 | 21.5 | 58 | 270 | 673 | |
| 20 | 52 | 20×1.5 | 24 | 25.5 | 66 | 312 | 524 |
Allowable load is the value when the speed is 10 km/h.kgf＝N×0.101972Roller Followers Dimensional Drawing
| Roller Followers Type | Roller Followers Material | Roller Followers Accessories | |
| With seal | Urethane | Cam follower | |
| C－CFFRUA | Shore A90 | SUJ2 | 1 hexagon socket nut (S45C ferroferric oxide protective film) |
■Hex socket on head (d5 to 8)
Roller Followers Operating environment at ambient temperature below 80 ℃ (reference).
Roller Followers No grease replenishing hole is provided for d16 and below.
Roller Followers Operating environment at ambient temperature below 80 ℃ (reference).Roller Followers No grease replenishing hole is provided for d16 and below.■ Hex Socket on Head Thread (d10~20)
