(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

Cam Followers Straight Slot, Flat

Cam Followers Straight Slot, Flat

Click this image to zoom it.

Move the mouse over the image to zoom

  • Cam Followers Straight Slot, Flat
  • Cam Followers Straight Slot, Flat
  • Volume Discount

(i)Caution

  • Products with d ≥ 10 are being gradually switched over to specifications with through holes in the L dimension. Please take this into account prior to purchasing.

Roller Followers Product Overview

Roller Followers Cam bearing is a kind of bearing with shaft, which has its needle roller mounted into the thick-wall outer ring and inner ring, most suitable for the transmission guide rail.
Cam follower is a high-performance bearing with shaft, which has a needle-shaped roller called needle roller mounted inside. The needle roller has the function of improving the rotating capacity and can withstand high-speed rotation. In addition, the outer ring is designed with a thicker wall than ordinary bearings, and can also be used in places subject to impact loads or heavy loads.
BP-151-1 Photo

Roller Followers Product Feature

1. Equipped with a shaft for easy installation!
2. Ideal for places subject to loads!
3. Also suitable for high speed rotation!

Standard Cam Follower Structure


BBP-151-2 Photo

Roller Guide Mode


The cam follower with cage is suitable for applications with low friction coefficient and high rotation speed, and the full complement roller cam follower is suitable for applications with high rotation speed and heavy load.
With Cage (Standard)   Full Complement Roller Heavy Load Type   
BP-151-1 Dimensional Drawing

Roller Followers Structure of Sealing Part


For the non-sealed type bearing, the gap between the outer ring and the end rod peripheral ring and between the outer ring and the side plate is small, thus forming a labyrinth. For the sealed type bearing, a sealing gasket is mounted in the shielded type labyrinth, thus preventing intrusion of foreign matter.
Non-sealed Type     Sealed Type 
BP-151-2 Dimensional Drawing

Roller Followers Outer Ring O.D. Shape


The bearing with spherical outer ring can alleviate uneven load caused by installation problems. The contact area between the bearing with arc outer ring and the slide rail surface is large, suitable for slide rail surfaces with large load or low hardness.
Arc Outer Ring Cylindrical Outer Ring
BP-151- Example of Use 2

Slide Rail Load Capacity Comparison


Slide Rail Load Capacity Comparison

Roller Followers Dimensional Drawing

Material Table

Cylindrical Shape
Dimensional Drawing

Specification Table

Roller Followers Specifications Overview

Product Accuracy (μm)
Allowable Tolerance
Allowable Tolerance

Allowable Tolerance of Outer Ring and Allowable Value
Allowable Tolerance of Outer Ring

Roller Followers Example of Use

Example of Use 1
Example of Use 2
Moving Direction
Linear Motion
The surface on the matching side must be flat
and the cam follower moves in a straight line
Linear Motion
Swing Direction
The surface on the matching side is curved, and
the cam follower moves in a curve
Curvilinear Motion
Attaching Method
Mounting Method
Do not use a hammer to directly hit the flange of the cam bearing during installation, otherwise it will cause poor rotation or fracture. Use a hex socket wrench or a slotted screwdriver.
Secure the hexagon socket or screwdriver slot for fixing, and then turn the nut with a wrench to tighten.

Bolt Tightening Torque
Do not exceed the maximum screw tightening torque when installing the cam follower. Otherwise, the threaded portion may be damaged.
Fixing Torque

Roller Followers Precautions

· If the Roller Followers falls to the ground or is struck hard, it may be damaged.
· Attention should be paid to the fact that impact can cause functional damage, even if it is not visible.
· Cam followers are suitable for radial loads and less suitable for thrust loads, so avoid using methods such as applying thrust loads.
· Some cam followers are not filled with grease due to different sizes.
Please refer to the table below and add proper amount of grease to the products that are not filled with grease before use.

Cam Follower Grease Performance and Service Temperature
Grease and Service Temperature

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
C-CFFR5-13
C-CFFR6-16
C-CFFR8-19
C-CFFR10-22
C-CFFR10-26
C-CFFR12-30
C-CFFR12-32
C-CFFR16-35
C-CFFR18-40
C-CFFR20-52
C-CFFRG5-13
C-CFFRG6-16
C-CFFRG8-19
C-CFFRG10-22
C-CFFRG10-26
C-CFFRG12-30
C-CFFRG12-32
C-CFFRG16-35
C-CFFRG18-40
C-CFFRG20-52
C-CFR5-13
C-CFR6-16
C-CFR8-19
C-CFR10-22
C-CFR10-26
C-CFR12-30
C-CFR12-32
C-CFR16-35
C-CFR18-40
C-CFR20-52
C-CFRG5-13
C-CFRG6-16
C-CFRG8-19
C-CFRG10-22
C-CFRG10-26
C-CFRG12-30
C-CFRG12-32
C-CFRG16-35
C-CFRG18-40
C-CFRG20-52
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipOuter Dia. D
(Ø)
Width B
(mm)
Stud Screw Nominal (M)
(mm)
Cam Follower: Stud Screw (Fine Thread)
(mm)
Basic Load Rating Cr (Dynamic)
(kN)
Basic Load Rating Cor (Static)
(kN)
Allowable Rotational Speed
(rpm)
Seal

SGD 7.80

1 Piece(s)Available Same day 139M5×0.8-2.512.2216240Provided

SGD 7.51

1 Piece(s)Available Same day 1611M6×1-3.153.314000Provided

SGD 7.53

1 Piece(s)Available Same day 1911M8×1.25-3.53.911000Provided

SGD 7.82

1 Piece(s)Available Same day 2212-M10×14.55.28000Provided

SGD 9.20

1 Piece(s)Available Same day 2612-M10×14.55.28000Provided

SGD 8.71

1 Piece(s)Available Same day 3014-M12×1.56.88.45500Provided

SGD 10.47

1 Piece(s)Available Same day 3214-M12×1.56.88.45500Provided

SGD 11.60

1 Piece(s)Available 5 Day(s) 3518-M16×1.59.814.13600Provided

SGD 15.24

1 Piece(s)Available 5 Day(s) 4020-M18×1.510.915.52900Provided

SGD 23.07

1 Piece(s)Available 5 Day(s) 5224-M20×1.516.7292400Provided

SGD 6.84

1 Piece(s)Available 49 Day(s) 139M5×0.8-4.55.316240Provided

SGD 6.60

1 Piece(s)Available 49 Day(s) 1611M6×1-4.96.514000Provided

SGD 6.60

1 Piece(s)Available 49 Day(s) 1911M8×1.25-5.47.911000Provided

SGD 6.84

1 Piece(s)Available 49 Day(s) 2212-M10×16.29.18000Provided

SGD 7.33

1 Piece(s)Available 49 Day(s) 2612-M10×17.311.38000Provided

SGD 7.58

1 Piece(s)Available 49 Day(s) 3014-M12×1.59.514.65500Provided

SGD 8.32

1 Piece(s)Available 49 Day(s) 3214-M12×1.51015.85500Provided

SGD 10.05

1 Piece(s)Available 49 Day(s) 3518-M16×1.512.8233600Provided

SGD 12.52

1 Piece(s)Available 49 Day(s) 4020-M18×1.514.826.52900Provided

SGD 18.44

1 Piece(s)Available 49 Day(s) 5224-M20×1.522.6482400Provided

SGD 7.62

1 Piece(s)Available Same day 139M5×0.8-2.512.2223200Not Provided

SGD 7.51

1 Piece(s)Available 5 Day(s) 1611M6×1-3.153.314000Not Provided

SGD 7.53

1 Piece(s)Available Same day 1911M8×1.25-3.53.911000Not Provided

SGD 8.27

1 Piece(s)Available Same day 2212-M10×14.55.28000Not Provided

SGD 8.84

1 Piece(s)Available 5 Day(s) 2612-M10×14.55.28000Not Provided

SGD 8.71

1 Piece(s)Available Same day 3014-M12×1.56.88.45500Not Provided

SGD 10.18

1 Piece(s)Available Same day 3214-M12×1.56.88.45500Not Provided

SGD 12.40

1 Piece(s)Available 5 Day(s) 3518-M16×1.59.814.13600Not Provided

SGD 15.02

1 Piece(s)Available 5 Day(s) 4020-M18×1.510.915.52900Not Provided

SGD 22.44

1 Piece(s)Available Same day 5224-M20×1.516.7292400Not Provided

SGD 6.69

1 Piece(s)Available 49 Day(s) 139M5×0.8-4.55.323200Not Provided

SGD 6.60

1 Piece(s)Available 49 Day(s) 1611M6×1-4.96.514000Not Provided

SGD 6.60

1 Piece(s)Available 49 Day(s) 1911M8×1.25-5.47.911000Not Provided

SGD 6.60

1 Piece(s)Available 49 Day(s) 2212-M10×16.29.18000Not Provided

SGD 7.09

1 Piece(s)Available 49 Day(s) 2612-M10×17.311.38000Not Provided

SGD 7.58

1 Piece(s)Available 49 Day(s) 3014-M12×1.59.514.65500Not Provided

SGD 8.08

1 Piece(s)Available 49 Day(s) 3214-M12×1.51015.85500Not Provided

SGD 9.80

1 Piece(s)Available 49 Day(s) 3518-M16×1.512.8233600Not Provided

SGD 12.02

1 Piece(s)Available 49 Day(s) 4020-M18×1.514.826.52900Not Provided

SGD 17.95

1 Piece(s)Available 49 Day(s) 5224-M20×1.522.6482400Not Provided

Loading...

  1. 1
 

Basic Information

Product Category Cam Followers Roller Type Cylindrical Outer Ring Tightening Method Standard Type
Cam Follower Type Standard Type Size Standards Metric System Roller Lining Not Provided
Shaft Provided Roller Guiding Method With Retainer Application Regular

Frequently asked question (FAQ)

Question: Mounting Method
Answer: Do not use a hammer to directly hit the flange of the cam bearing during installation, otherwise it will cause poor rotation or fracture. Fix the inner hexagon or screwdriver slot with a hex socket wrench or a slotted screwdriver, and then turn the nut with a wrench to tighten. Do not exceed the maximum screw tightening torque when installing the cam follower. Otherwise, the threaded portion may be damaged.
Question: Applicable load of cam follower
Answer: It is applicable to radial load, but not very applicable to thrust load, so avoid using methods such as applying thrust load.
Question: Usage difference of different O.D. shapes of outer ring
Answer: The bearing with spherical outer ring can alleviate uneven load caused by installation problems. The contact area between the bearing with arc outer ring and the slide rail surface is large, suitable for slide rail surfaces with large load or low hardness.

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(65) 6733 7211 / FAX:(65) 6733 0211
9:00am - 6:00pm (Monday - Friday)