(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Instead, please kindly use other browsers like Google Chrome, Microsoft Edge or Mozilla Firefox.

Aluminum Frame 8-45 Series Square 45 × 45 mm 3 Side Slots

Aluminum Frame 8-45 Series Square 45 × 45 mm 3 Side Slots
  • Volume Discount

Aluminum Frame Series 8-45, Square shape 45 x 45mm, 3- Side Slots with Slot width 10mm
Surface treatment is not applied to cut surfaces and additional machining parts.

(i)Caution

  • Additional freight and delivery charge are added to items longer than 2000.1mm

Note that, for some of the types shown here, order might be unable to be received by the MISUMI Thailand, Malaysia, Indonesia, and/or India offices.

Aluminum Extrusion 8-45 Series/slot width 10/45x45mm:Related Image

Aluminum Extrusion 8-45 Series/slot width 10/45x45mm:Related Image

Aluminum Extrusion 8-45 Series/slot width 10/45x45mm:Related Image

[ ! ]Cut surfaces and altered parts are not surface treated.

■8-45 Series
Aluminum Extrusions with 10mm Slot Width. Applicable to M8 Screws.

Specifications

Part Number - L
HFSF8-4545 - 800
KHFSF8-4545 - 4000


■Configurable Length Extrusion

Type [ M ]Material [ S ]Surface Treatment Part Number L 0.5mm Increment Mass kg/m Sectional Area mm2 Cross Sectional Moment of Inertia mm4
ℓx ℓy
HFS A6N01SS-T5 Clear Anodize HFSF8-4545 50~4000 1.97 730 13.88x104 14.58x104
HFS A6N01SS-T5 Black Anodize HFSFB8-4545 50~4000 1.97 730 13.88x104 14.58x104
HFSL A6N01SS-T5 Clear Anodize HFSLF8-4545 50~4000 1.6 590 10.88x104 11.33x104
EFS A6N01SS-T5 Clear Anodize EFSF8-4545 50~4000 1.83 677 14.58x104 15.00x104
GFS A6061SS-T6 Equivalent Clear Anodize GFSF8-4545 50~4000 3.16 1172 24.54x104 23.36x104
NEFS A6063S-T5 Clear Anodize NEFSF8-4545 50~4000 1.83 677 14.58x104 15.00x104

[ ! ]For some product types, up to 6,000mm length is available.
[ ! ]Some extrusions are not applicable. For details, refer to "Information about Non-FA Catalog Standard Product Services" (P.131) and contact the relevant person in charge at MISUMI.
■Fixed Length Extrusion (Effective Length 4000mm)
[ ! ]Part numbers beginning with the character "K" indicate Fixed Length Extrusion.

Type [ M ]Material [ S ]Surface Treatment Part Number L
mm
Sectional Area mm2 Cross Sectional Moment of Inertia mm4
ℓx ℓy
HFS A6N01SS-T5 Clear Anodize KHFSF8-4545 4000 730 13.88x104 14.58x104
HFS A6N01SS-T5 Black Anodize KHFSFB8-4545 4000 730 13.88x104 14.58x104
HFSL A6N01SS-T5 Clear Anodize KHFSLF8-4545 4000 590 10.88x104 11.33x104
EFS A6N01SS-T5 Clear Anodize KEFSF8-4545 4000 677 14.58x104 15.00x104
GFS A6061SS-T6 Equivalent Clear Anodize KGFSF8-4545 4000 1172 24.54x104 23.36x104
NEFS A6063S-T5 Clear Anodize KNEFSF8-4545 4000 677 14.58x104 15.00x104

[ ! ]Effective length of 4000mm indicates extrusions with an effective length of 4000mm or more. The actual length including marginal grip is more than 4000mm (several dozen mm). Fixed Length Extrusions must be cut by users thus the exact length cannot be specified.

Alterations

Aluminum Extrusion 8-45 Series/slot width 10/45x45mm:Related Image
By using MISUMI's Long Aluminum Frame specification from the following additions, the high structure reassembling is freely possible.
Depending on classifications and sizes, there are some inapplicable frames.
For more information, please read the inapplicable listed on each page description table.
Inside the page description table, the items with "-" mark indicates the inapplicable.
CategoryAlteration NamesCodesExplanationsCatalog Page
Aluminum Frame  Alteration Summary/Chamfer/Part# Labeling ServiceP2-755&756
End TappingEnd Tapping on Center HoleLTP/RTP/TPW
LHP/RHP/HPW
Add tappings on frame ends.P2-757
End Tapping 4 Corner HolesLSP/RSP/SPWP2-768
Specify How to CutPrecision CutSCChange total length tolerance. (L±0.5→L±0.2)
[ ! ]Available only for L≦1500
P2-758
45 deg CutL_T45/R_T45Cut at 45 deg angle. 
Wrench Access HolesWrench Access Hole at Fixed PositionLWP/RWPAdd wrench access holes at fixed position for blind joints. P2-759&760
Wrench Access Hole at Specified PositionAH/BH/AV/BVAdd wrench access holes at specified position for blind joints.P2-761&762
CounterboresCounterbores at Specified PositionZ6/XA100Add counterbores at specified position. Use the holes for connecting the frames and a table top.P2-763
Holes for Specific Blind Joint TypeD HoleLDH/RDHAdd holes needed for Single Joint connection.P2-764
S HoleLSH/RSHAdd holes needed for pre-assembly double joint connection.P2-765
M HoleLMH/RMHAdd holes needed for post-assembly double joint connection.P2-766
L HoleJLP/KLPAdd holes needed for parallel joint connection. P2-767
Other AlterationsGNFS/GFS Series End TappingLTS/RTS/TSWAdd end tappings on high rigidity frames.P2-768
HFSR Series End TappingLTS/RTS/TSWAdd end tappings needed for adding a protection cover on the end fo HFSR series frame.

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
EFSF8-4545-[50-4000/0.5]
GFSF8-4545-[50-4000/0.5]
HFSF8-4545-[50-4000/0.5]
HFSFB8-4545-[50-4000/0.5]
HFSLF8-4545-[50-4000/0.5]
KEFSF8-4545-4000
KGFSF8-4545-4000
KHFSF8-4545-4000
KHFSFB8-4545-4000
KHFSLF8-4545-4000
KNEFSF8-4545-4000
NEFSF8-4545-[50-4000/0.5]
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSExtrusion Type_ Surface Treatment Material L Dimension Fixed, Specified Overall Length L (Effective Length)
(mm)
Overall Length L
(mm)

-

1 Piece(s) 4 Day(s) or more 10EFS (Lightweight)Clear AnodizeA6N01SS-T5Configurable-50 ~ 4000

-

1 Piece(s) 4 Day(s) or more 10GFS (High Rigidity)Clear AnodizeA6061SS-T6 EquivalentConfigurable-50 ~ 4000

-

1 Piece(s) 4 Day(s) or more -HFS (Standard)Clear AnodizeA6N01SS-T5Configurable-50 ~ 4000

-

1 Piece(s) 4 Day(s) or more 10HFS (Standard)Black AnodizeA6N01SS-T5Configurable-50 ~ 4000

-

1 Piece(s) 4 Day(s) or more 10HFSL (Lightweight, Standard)Clear AnodizeA6N01SS-T5Configurable-50 ~ 4000

SGD 396.92

1 Piece(s)Available 3 Day(s) 10EFS (Lightweight)Clear AnodizeA6N01SS-T5Stationary4000-

SGD 330.31

1 Piece(s)Available 3 Day(s) 10GFS (High Rigidity)Clear AnodizeA6061SS-T6 EquivalentStationary4000-

SGD 398.17

1 Piece(s)Available 3 Day(s) -HFS (Standard)Clear AnodizeA6N01SS-T5Stationary4000-

SGD 439.20

1 Piece(s)Available 3 Day(s) 10HFS (Standard)Black AnodizeA6N01SS-T5Stationary4000-

SGD 380.34

1 Piece(s)Available 3 Day(s) 10HFSL (Lightweight, Standard)Clear AnodizeA6N01SS-T5Stationary4000-

SGD 387.67

1 Piece(s)Available 3 Day(s) 10NEFS (Economy)Clear AnodizeA6063S-T5Stationary4000-

-

1 Piece(s) 4 Day(s) or more 10NEFS (Economy)Clear AnodizeA6063S-T5Configurable-50 ~ 4000

Loading...

  1. 1
 

Basic Information

Standard Extrusion Size(mm) 45 Extrusion Size 45x45 Extrusion Series MISUMI 8-45 Series (10 mm Groove Width)
Extrusion Type Square Shape Number of Extrusion Slots 1 Slot x 1 Slot Number of Slotted Surfaces Three-Side Slots
Surface Milled Not Provided Extrusion Size: Width (A)(mm) 45 Extrusion Size: Thickness (T)(mm) 45

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel:(65) 6733 7211 / FAX:(65) 6733 0211
9:00am - 6:00pm (Monday - Friday)